IAD132E(T)配置操作说明new

******************************************

* *

* IAD2000 Integrated Access Device *

* *

******************************************

Copyright(C) 2002-2004 by HUAWEI TECH CO., LTD

Host name:

Phone:

User name (<=15 chars):root

User password (<=15 chars):admin

IAD2000>enable

IAD2000#configure terminal

IAD2000(config)#eid psmfc.ts.xz 域名一般设置为“专网名称.区域.徐州”的拼音缩写★Command executing, please wait...

--------------------------------------------------

Equipment ID : psmfc.ts.xz

--------------------------------------------------

IAD2000(config)#ip address

{ ip-address }:10.136.42.186 此处为NGN私网地址★

{ net-mask }:255.255.255.0

{ |gateway-ip }:10.136.42.1

Command:

ip address 10.136.42.186 255.255.255.0 10.136.42.1

Changing net parameter may affect current service, continue?[Y|N]:y

Command executing, please wait...

--------------------------------------------------

Device network configuration is:

IP address: 10.136.42.186

Subnet mask: 255.255.255.0

Default Gateway: 10.136.42.1

--------------------------------------------------

Begin Register to IADMS............................................

Register time out

IAD2000(config)#iadms

{ dns|iadms_address|ip|name|register|handshake }:ip

{ iadms_address }:10.136.41.143

{ getcommunity<1,15> }:psmfc-get 此处前缀尽量与域名前缀保持一致★

{ setcommunity<1,15> }:psmfc-set ★

{ trapcommunity<1,15> }:trap ★

{ |iadmsTrapPort<0,65535> }:162

Command:

iadms ip 10.136.41.143 psmfc-get psmfc-set trap 162

IAD2000(config)#iadms dns disable

IAD2000(config)#interface mg 0

IAD2000(config-if-mg-0)#show if-mg attrib

-------------------------------------------------

MGID Protocol Codetype DomainName

0 MGCP text -

Transmode IADPort IADIP Interface state

UDP 2427 10.136.41.133 Interface faulty

MGCport MGCIP/DomainName InterfaceName

2727 - aaln

-------------------------------------------------

IAD2000(config-if-mg-0)#if-mg attribute

{ port|domain-name|mgcip|mgcport|interface-name }:domain-name { domain-name<1,60> }:psmfc.ts.xz 此处与域名保持一致★

{ |port|mgcip|mgcport|interface-name|password }:mgcip

{ mgcip<0,64> }:10.136.0.6

{ |port|mgcport|interface-name }:

Command:

if-mg attribute domain-name psmfc.ts.xz mgcip 10.136.0.6

IAD2000(config-if-mg-0)#show if-mg attribute

-------------------------------------------------

MGID Protocol Codetype DomainName

0 MGCP text psmfc.ts.xz

Transmode IADPort IADIP Interface state

UDP 2427 10.136.41.133 Inteface waiting for ack MGCport MGCIP/DomainName InterfaceName

2727 10.136.0.6 aaln

-------------------------------------------------

IAD2000(config-if-mg-0)#mg backup-mgc mgcip 10.136.8.6 mgcport 2727

IAD2000(config-if-mg-0)#exit

IAD2000(config)#write

Command executing, please wait...

Main control board in slot 0 starts to save configuration data, please wait.....

.

IAD2000(config)#The configuration data backed up for the main control board in s

lot 0 is: 96%

The configuration data backed up for the main control board in slot 0 is: 98%

The configuration data backed up for the main control board in slot 0 is: 100% The backup of configuration data on the active board in slot 0 has been complete d

IAD2000(config)#exit

IAD2000#exit

You have quitted from the system!

Press any key to get started!

带★部分需要与综合业务网数据对接，请设置后通知我