PPG电泳漆P6000PX手册

Product Booklet 产品手册

Attributes

产品特点

Product Evolution 产品的发展史

Advantages

产品优点

Performance Data 产品性能数据

Approvals

认可

Commercial Uses

商业应用

?Registered Trademark

PPG INDUSTRIES, Inc.

151 Colfax Street

Springdale, Pennsylvania 15144

POWERCRON 6000PX is an improved version of PPG Industries’ sixth-generation cathodic epoxy electrocoat. This product was formulated to meet the automotive industry corrosion requirements without the use of heavy metals (namely lead and chrome) in the paint film. This product is suitable for use in applications either where a “primer only” is specified, or where topcoatability of a primer is required.

POWERCRON 6000PX是PPG公司第六代阴极环氧电泳漆的改进型产品。这种产品的推出是为了在漆膜中无重金属（即铅合铬）的情况下，更好的满足汽车工业防腐的要求。这种产品适合于单独底漆涂装或涂装面漆。

Eliminate Hazardous Waste

消除有害废物

Most prior cationic epoxy products contained lead or required a chrome rinse pretreatment for maximum corrosion performance. Lead and chrome are currently considered hazardous materials, and therefore are regulated. Future legislation may ban the use of lead and chrome in industrial paint formulations and make heavy metal waste disposal increasingly difficult and costly. In addition, automobile manufacturers are requiring their suppliers to identify, decrease, and even eliminate lead in the coatings used on their parts. POWERCRON 6000PX will enable customers to meet automotive corrosion requirements without the use of heavy metals in the finishing process.

以前大多数阴极环氧电泳漆为了最大限度的提高防腐能力，其配方中含有铅或需要钝化前处理。铅和铬是有害物质并且其使用受到管制。将来的立法可能会禁止在工业涂料的配方中含有铅和铬，而且会使重金属废物处理的难度增加，成本上升。另外，汽车生产厂商要求在涂装汽车和零部件的涂料中减少或消除铅或铬。POWERCRON6000PX将会满足客户对于漆膜无重金属的要求，并且达到汽车防腐的要求。

Parts and Bodies

POWERCRON 6000PX was adopted from PPG’s automotive coatings group where it is used to protect car bodies. It also meets the requirements of the automotive small parts specifications. This product is very well suited for most facilities painting automotive parts and / or body panels.

POWERCRON6000PX 是从PPG公司汽车漆部门采用过来的，它曾用于轿车车声防护。它同样达到汽车零部件的防护要求。这种产品适用于汽车零部件或车身。

POWERCRON 6000PX: Improved Sixth Generation Cationic Epoxy Technology. POWERCRON 6000PX:改进型第六代阴极环氧电泳漆。

First Generation第一代

1976 POWERCRON 500 Corrosion Protection防腐蚀

(ED3002)

Second Generation第二代

1979 POWERCRON 500E Reduced VOC VOC降低

(ED3002V)

Third Generation 第三代

1981 POWERCRON 600 Improved Corrosion Resistance

增强防腐能力

(UNI-PRIME?) Improved Stability

增强稳定性

Reduced Effluent Discharge

减少排放量

Fourth Generation第四代

1986 POWERCRON 640 Improved Topcoatability

改进与面漆的配合性

(ED-4) Reduced Weight Loss降低加热减量

Reduced VOC降低VOC

Fifth Generation第五代

1991 POWERCRON 648 Reduced Cost降低成本

(ED-5000) Improved Edge Coverage

提高边缘覆盖率

Improved Throwpower提高泳透力Sixth Generation第六代

1993 POWERCRON 690 Heavy Metal-Free无重金属

(ENVIRO-PRIME?) Improved Performance改进漆膜性能

Reduced VOC降低VOC

2001 POWERCRON 6000PX Improved Workability改进可使用性Seventh Generation第七代

1995 POWERCRON 590 Heavy Metal-Free无重金属

HAPs-Free无有害空气污染物

Improved Efficiency提高电泳效率1998 Single-Component Feed Package

单组分加料包装

POWERCRON 6000PX cathodic epoxy electrocoat was developed with excellent performance properties in an environmentally friendly package. Specific advantages include:

POWERCRON 6000PX阴极环氧电泳漆具有优秀的漆膜性能和环保的包装。其优点包括：

Corrosion Resistance/ Heavy Metal-Free - POWERCRON 6000PX offers superior corrosion resistance without the use of heavy metals. This product is capable of corrosion protection in excess of 1000 salt-spray hours.

抗腐蚀能力/无重金属POWERCRON 6000PX不含重金属且具有优秀的抗腐蚀能

力，盐雾试验超过1000小时。

Topcoatability - POWERCRON 6000PX is formulated for a wide window of

topcoat compatibility.

面漆可涂装性能POWERCRON 6000PX可与多种面漆配合。

Total Coverage 整体覆盖性能- The excellent throwpower of POWERCRON 6000PX results in total part coverage, regardless of part complexity.

Throwpower allows for uniform film thickness over every area of the part.

POWERCRON 6000PX具有优异的泳透力，不管零件形状的复杂程度如何，都能整体覆盖，且膜厚一致。

Aesthetics 表观效果- Flow characteristics are exceptional, exhibiting a smooth film appearance at less than 1 mil film thickness. Excellent flow control benefits have reduced the tendency for contamination to cause cratering.

卓越的流平性可以使不足1mil漆膜十分平滑，并且减少了由于污染而导致缩孔的可能性。

Chip Resistance 抗石击性-POWERCRON 6000PX has excellent chip resistance. A potential site for corrosion occurs when coatings chip down to bare metal. Reduced chipping relates to fewer potential corrosion sites.

POWERCRON 6000PX具有优秀的抗石击性。漆膜受撞

击后脱落露出金属表面是产生腐蚀的潜在因素。减少撞

击后期膜的脱落可以减少腐蚀的潜在因素。

Reduced Hazardous Waste Disposal

有害废物排放- POWERCRON 6000PX is heavy metal-free. Therefore, any solid waste generated should be characterized as non-

hazardous and be less expensive to dispose of than lead-

containing waste.

POWERCRON 6000PX不含重金属。因此，所损失的固体份

是无害的，而且其废物处理所需的费用要要大大少于含重金

属的涂料。

Improved UF Flux Rates 提高超滤流量-The elimination of lead-containing pigments coupled with lower solids and reduced pigment levels usually improves ultrafilter performance. With POWERCRON 6000PX, flux rates increase and cleaning frequency is reduced.

无铅颜料浆，低固体份和低颜料含量可以提高超滤其性能。

POWERCRON 6000PX的使用，可以提高超滤流量，降低超

滤膜清洗频率。

Low VOC

低VOC

(VOC:可挥发性有机化合物含量) - POWERCRON 6000PX operates at a Volatile Organic Compound level of less than 0.6 pounds per gallon. Low emissions help to keep our environment safe and healthy, and eliminate permitting headaches.

POWERCRON 6000PX的VOC小于0.6磅/加仑. 低挥发量

可以保证环境的安全和人体的健康.

Minimal Effluent 最小限度的排放- Wastewater concerns are virtually eliminated and permeate discharge is minimal.

只有最小限度的超滤液排放.

Cold Rolled Steel Lab Panels实验室用冷卷钢板

Zinc Phosphate Pretreatment锌磷化前处理0.6 Mil Average Film Thickness平均膜厚0.6Mil Cure 20 Minutes @ 350 F固化：20分钟@350F

(Average Total Scribe Creep)平均锈蚀宽度

●Salt Spray - ASTM B117-97盐雾试验标准-ASTM B117-97 ●** Cycle Scab - GM9511P循环腐蚀试验标准GM9511P

Cold Rolled Steel Lab Panels实验室用冷卷钢板

Cure 20 Minutes @ 350 F固化：20分钟@350F

POWERCRON 6000PX is approved under the following specifications. POWERCRON 6000PX已通过如下认可：

Automotive Parts and Accessories汽车零部件

Specification No. Status

规范文件号状态DaimlerChrysler MS-PB45-2 Approved通过

戴姆勒克莱斯勒

Ford WSS-M6J152B1-B5 Approved通过

福特WSB-M64J28 Approved通过

ESB-M64J19 Approved通过

ESB-M64J23 Approved通过

ESB-M64J25 Approved通过

WSB-M64J30 Approved通过

WSB-M64J36 Approved通过

ESL-M2P122A1-A5 Approved通过

ESE-M2P128A Approved通过

ESA-M2P13A1-A3 Approved通过

WSS-M2P177A2 Approved通过

ESB-M64J12-B1-B3 Approved通过

ESB-M64J19A1-A3 Approved通过

ESB-M64J20A1-A3 Approved通过

WSB-M64J28A1-A3 Approved通过

WSB-M64J36A1-A3 Approved通过

WSB-M64J38A1-A4 Approved通过

WSS-M64J39A1-A5 Approved通过

WSS-M64J41A1-A5 Approved通过General Motors9984120 Approved通过

通用汽车Approved for Topcoat

面漆通过

Cationic Epoxy Electrocoats are the benchmark for corrosion resistance and are utilized when high performance requirements are demanded. Listed below are a number of industries using these products:

阴极环氧电泳漆具有高抗腐蚀性和优秀的漆膜性能，适用于如下工业领域：

Industries工业领域

?Automotive Parts & Accessories 汽车零部件?Heavy Duty Trucks重型卡车

?Compressors压缩机?Marine Engines航海用发动机

?Computer Parts 计算机零部件?Switchgear变速箱

?Fasteners扣件?Transformers变压器

?Generators发电机

Commercial Tanks已投入使用的电泳槽

10 Tanks 10个As of 4/24/2001截至于2001/4/24

DCX戴姆勒克莱斯勒Bramalea Bodies车身Gray灰色

DCX戴姆勒克莱斯勒Dodge City Bodies车身Gray灰色

DCX戴姆勒克莱斯勒Jeep Toledo North Bodies车身Gray灰色

DCX戴姆勒克莱斯勒Pillette Rd. Bodies车身Gray灰色

DCX戴姆勒克莱斯勒Windsor #2 Bodies车身Gray灰色

GM通用汽车Lordstown Bodies车身Gray灰色

GM通用汽车Orion Bodies车身Gray灰色

GM通用汽车Oshawa #1 Bodies车身Gray灰色

GM通用汽车Oshawa #2 Bodies车身Gray灰色

GM通用汽车Pontiac #14 Parts零部件Black黑色