M101NWT2 R2 productinformation____ 100520
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 1/28 07 Issue Date 2010/05/20 Revision
Product Information
To: Product Name: M101NWT2 R2
Document Issue Date: 2010/05/20
Note: 1. Please contact InfoVision Company. before designing your product based on this product. 2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by IVO for any intellectual property claims or other problems that may result from application based on the module described herein.
FQ-7-30-0-009-02C
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 1 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No.
Revision
00 01 02
M101NWT2 R2 Product Information
Page No. 2/28 07
Remark
Issue Date 2010/05/20 Revision
Page
-4 8 11 12 18 18 19 20 22
Date
2010/04/06 2010/04/07 2010/04/08
Old Description
-Response time :16ms(typ) TBD
New Description
first issued Response time : 8ms(typ) Update Rx/y, Gx/y, Bx/y Add LED power consumption define modify connector type Add VDD Rise time measure condition Modify T13 min value is 500ms Update front side outline drawing Update back side outline drawing Update package specification Add EDID table Modify to 2.0V(min) Modify Vcom define 1.0(min),1.2(typ),1.4(max) Modify IDD to 160mA Modify to 2.8W(max)
03
2010/04/09
T13 min value is 1000ms
TBD TBD V_LED_EN: High 2.6V(min) Vcom: IDD 160A Power Consumption TBD
04 05
2010/04/12 2010/04/30
27 11 13
06 07
2010/5/12 2010/5/20
17 5
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 2 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 3/28 07 Issue Date 2010/05/20 Revision
Contents
1 2 3 4 5 6 8 9 General Descriptions ....................................................................................................................4 Absolute Maximum Ratings.........................................................................................................6 Pixel Format Image.......................................................................................................................7 Optical Characteristics..................................................................................................................8 Backlight Characteristics............................................................................................................ 11 Electrical Characteristics............................................................................................................12 Power Consumption .....................................................................................................................17 Power ON/OFF Sequence...........................................................................................................18
10 Mechanical Characteristics........................................................................................................19 11 Package Specification ................................................................................................................22 12 Lot Mark ........................................................................................................................................23 13 General Precaution .....................................................................................................................24 14 EDID Data Structure ...................................................................................................................26
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 3 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 4/28 07 Issue Date 2010/05/20 Revision
1
General Descriptions
1.1 Introduction The M101NWT2 R2 is a color active matrix thin film transistor (TFT) TN liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. It is composed of a TFT LCD panel, a timing controller, voltage reference, common voltage, column driver, and row driver circuit. This TFT LCD has a 10.1-inch diagonally measured active display area with WSVGA resolution (1,024vertical by 600 horizontal pixel array). 1.2 Features ■ 10.1” TFT LCD Panel ■ LED Light-bar Backlight System ■ Supported WSVGA (V:1024 lines, H:600 pixels) Resolution ■ Compatible with RoHS Standard ■ Dual Gate (2 Source + 2 Gate) 1.3 Product Summary
Items Screen Diagonal Active Area Pixels H x V Pixel Pitch Pixel Arrangement Display Mode White Luminance Contrast Ratio Response Time View Angle(L/R/U/D) Input Voltage Power Consumption Module Weight Specifications 10.1 222.72(H) x 125.28(V) 1,024 (x3) x 600 0.2175(H)x0.2088(V) R.G.B. Vertical Stripe Normally White (TN) 200 (Typ.) 5 points average 500 (Typ.) Unit Inch mm mm cd/ m (20mA of per LED) ms V Watt g mm 2
45/45/15/35(Typ.) +3.3 (Typ.) 2.8 (Max) 190(Max.)
Electrical Interface (Logic) Support Color Color Gamut
Optimum Viewing Direction Surface Treatment
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 4 of 28 Tel:0512-******** Fax:0512-********
）
（
Outline Dimension
MAX
235.5 x 143.5 x5.2 LVDS 262 K 45%(Typ.) 6 o’clock Anti-Glare + HC
） （
8 Typ.
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. 1.4 Functional Block Diagram M101NWT2 R2 Product Information Page No. 5/28 07 Issue Date 2010/05/20 Revision
Figure 1 shows the functional block diagram of the LCD module. Figure 1 Block Diagram
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 5 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. 2 M101NWT2 R2 Product Information Page No. 6/28 07 Issue Date 2010/05/20 Revision
Absolute Maximum Ratings
Table 1
Item Supply Voltage Supply V_LED voltage Input Signal Operating Temperature Operating Humidity Storage Temperature Storage Humidity TOP HOP TST HST Symbol VDD V_LED Min -0.3 5 -0.3 0 10 -20 10 Max 4.0 21 2.7 50 80 60 90 1.5G Vibration 10 500Hz Shock LED Current I-LED Unit V V V deg. C %RH deg. C %RH G Hz G ms mA Conditions Typ.=3.3V Typ=12V LVDS signals (Note 3 ) (Note 3 ) (Note 3 ) (Note 3 )
30min for X, Y, Z axis
Note (1) Maximum Wet-Bulb should be 39 degree C. No condensation. (2) When you apply the LCD module for OA system. Please make sure to keep the temperature of LCD module is less than 60 . (3) Storage /Operating temperature.
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 6 of 28 Tel:0512-******** Fax:0512-********
℃
～
220 2 20
Half sign wave per LED
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 7/28 07 Issue Date 2010/05/20 Revision
3
Pixel Format Image
Figure 2 shows the relationship of the input signals and LCD pixel format image. Figure 2 Pixel Format
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 7 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 8/28 07 Issue Date 2010/05/20 Revision
4
Optical Characteristics
The optical characteristics are measured under stable conditions as following notes. Table 2 Optical Characteristics
Item Conditions Min Horizontal Viewing Angle [degrees] K=Contrast Ratio>10 Vertical Contrast ratio Response Time [ms] Center Rising + Falling Red Red Green Color Chromaticity (CIE1931) Green Blue Blue White White White Luminance [cd/m^2] Luminance Uniformity [%] x y x y x y x y 0.283 0.299 180 62.5 80.0 Typ. -0.03 Left Right Up Down 40 40 10 30 350 Specification Typ. 45 45 15 35 500 3+5 0.579 0.346 0.336 0.560 0.156 0.123 0.313 0.329 200 0.343 0.359 Typ. +0.03 Max 16 A, C A, D A, A, A, A, A, A, A, A, 5point A, F A, E A, B Note
I-LED=20.0mA I-LED =20mA, 13points I-LED =20mA, 5points
Note: A. Measurement Setup
The LCD module should be stabilized at given temperature for 15 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 15 minutes in a windless room.
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 8 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 9/28 07 Issue Date 2010/05/20 Revision Figure 3 Measurement Setup
LCD Module LCD Panel Center of the Screen Photo meter (DMS 1140)
Light Shield Room 44 mm *Ambient Luminance<2lux *Ambient Temperature 25+/-3degC
B. Definition of Viewing Angle Figure 4 Definition of Viewing Angle
Normal θx = θy = 0° θyθx- = 90° xθxθx+ θy+ 12 o'clock direction θy+ = 90° y+
6 o'clock yθy- = 90°
x+ θx+ = 90°
C. Definition of Contrast Ratio (CR) The contrast ratio can be calculated by the following expression Contrast Ratio (CR) = L63 / L0 L63: Luminance of gray level 63, L0: Luminance of gray level 0
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 9 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. D. Definition of Response Time (TR, TF) Figure 5 Definition of Response Time M101NWT2 R2 Product Information Page No. 10/28 07 Issue Date 2010/05/20 Revision
Figure 6 Measurement Locations of 13 Points
10mm 1/4 H 10mm Y6 Y2 Y1 Y4 10mm Y12 Y11 Y5 Y10 Y9 1/2 H Y7 3/4 H Y8 1/4 V 1/2 V 3/4 V
10mm
Y13
E. Definition of Luminance White Measure the luminance of gray level 63 at center point and 5 points. Center of Luminance = Y1 Average Luminance of 5 points = F. Definition of Luminance Uniformity(Variation) Measure the luminance of gray level 63 at 13 points. Uniformity of 13 points = Min Luminance of Y1~Y13 Max Luminance of Y1~Y13 Min Luminance of Y1~Y5 Max Luminance of Y1~Y5 x 100% Y1 + Y2 + Y3 + Y4 + Y5 5
Uniformity of 5 points =
x 100%
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 10 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 11/28 07 Issue Date 2010/05/20 Revision
5
Backlight Characteristics
5.1 Parameter Guideline of LED Backlight Table 3 Parameter Guideline for LED Backlight
Symbol VLED Parameter LED input Min. 5 2.9 Typ. 12 3.3 20 2.1 Max. 21 3.4 Units [V] [V] [mA] Condition Ta=25[deg C] Ta=25 Ta=25
VF IF PLED
LT
LED Forward Voltage
LED Forward Current
LED Power Consumption
LED Life Time PWM Signal Voltage High Low 10,000 2.0 0 2.0 0 5 3.3 200 3.3 -
W
Hours V V Hz
Ta=25[deg A] Note C
Ta=25[deg C] Note C -
3.6 0.5 1K 3.6 0.5 100
VPWM_EN
FPWM
Output PWM frequency LED enable Voltage PWM Duty ratio High Low
-
VLED_EN
V % -
PWM
A: The LED life time define as the estimated time to 50% degradation of initial luminous. B: Strong propose to set LED Input Voltage 12V, it would be best power efficiency. C: Calculator value for reference PLED =VF(normal Distribution) x IF (Normal Distribution) / Efficiency
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 11 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 12/28 07 Issue Date 2010/05/20 Revision
6
Electrical Characteristics
6.1 Interface Connector Table 4 Connector Name / Designation
Manufacturer Type / Part Number
Starconn/I-PEX (or equivalent)
111A40-0000RA-G3
(Starconn)
Mating Receptacle/Part Number
Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Signal Name GND VDD VDD VEDID Description Ground
20453-040T
(I-PEX)
Table 5 Signal Pin Assignment
Remarks
Power supply 3.3V(Typ.) Power supply 3.3V(Typ.) EDID +3.3V Power
NC
CLK_EDID DAT_EDID RXin0RXin0+ GND RXin1RXin1+ GND Rin2Rin2+ GND CLKNCLKN+ NC NC NC GND NC NC GND NC NC
Not connected(Reserve)
EDID Clock Input EDID Data Input LVDS differential data input(R0-R5,G0) LVDS differential data input(R0-R5,G0) LVDS differential data input(G1-G5,B0-B1) LVDS differential data input(G1-G5,B0-B1) LVDS differential data input(B2-B5,HS,VS,DE) LVDS differential data input(B2-B5,HS,VS,DE) LVDS differential clock input LVDS differential clock input
LCD panel self test
Ground
Ground
Ground
Not connected(Reserve) Not connected(Reserve) Not connected(Reserve) Ground-Shield Not connected(Reserve) Not connected(Reserve) Ground-Shield Not connected(Reserve) Not connected(Reserve)
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 12 of 28 Tel:0512-******** Fax:0512-********
＋ － ＋ － ＋ － ＋ －
Reserve for Color_EN
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No.
28 29 30 31 32 33 34 35 36 37 38 39 40 GND NC NC VLED_GND VLED_GND VLED_GND NC VPWM_EN VLED_EN NC VLED VLED VLED Ground-Shield Not connected(Reserve) Not connected(Reserve) LED Ground LED Ground LED Ground Not connected(Reserve) System PWM Logic Input Level LED enable Input Level(+3.3V) Not connected(Reserve) LED Power Supply LED Power Supply LED Power Supply Reserve for DBC
M101NWT2 R2 Product Information
Page No. 13/28 07
Issue Date 2010/05/20 Revision
Note:All input signals shall be low or Hi-Z state when VDD is off. 6.2 LVDS Receiver 6.2.1 Signal Electrical Characteristics for LVDS Receiver The built-in LVDS receiver is compatible with (ANSI/TIA/TIA-644 ) standard. Table 6 LVDS Receiver Electrical Characteristics
Parameter Differential Input High Threshold Differential Input Low Threshold Magnitude Differential Input Voltage Common Mode Voltage Common Mode Voltage Offset Symbol Vth Vtl |Vid| Vcm Vcm Min -100 100 1.0 Typ. Max 1.2 +100 600 1.4 50 Unit mV mV mV V mV Vcm=+1.2V Conditions Vcm=+1.2V Vcm=+1.2V
Note: A. Input signals shall be low or Hi-Z state when VDD is off. B. All electrical characteristics for LVDS signal are defined and shall be measured at the interface connector of LCD. Note: All values are at VDD=3.3V, Ta=25 degree C.
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 13 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 14/28 07 Issue Date 2010/05/20 Revision Figure 7 Voltage Definitions
Figure 8 Measurement System
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 14 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 15/28 07 Issue Date 2010/05/20 Revision Figure 9 Data mapping
6.2.2 LVDS Receiver Internal Circuit
Figure 10 LVDS Receiver Internal Circuit shows the internal block diagram of the LVDS receiver. This LCD module equips termination resistors for LVDS link.
Figure 10 LVDS Receiver Internal Circuit
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 15 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 16/28 07 Issue Date 2010/05/20 Revision
7.
Interface Timings
7.1 Timing Characteristics Table 7 Interface Timings
Parameter LVDS Clock Frequency(single) H Total Time H Active Time V Total Time V Active Time Frame Rate Symbol Fdck Htotal Hac Vtotal Vac Vsync Unit MHz clocks clocks lines lines Hz min 44.4 1320 1024 612 600 55 Typ. 50.4 1344 1024 625 600 60 Max 65.2 1362 1024 638 600 65
Figure 11 Timing Characteristics
Note: TES is data enable signal setup time.
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 16 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 17/28 07 Issue Date 2010/05/20 Revision
8
Power Consumption
Input power specifications are as follows. Table 8 Power Consumption
Symbol VDD IDD PDD Irush VDDrp Parameter Logic/LCD Drive Voltage VDD Current VDD Power Rush Current Allowable Logic/LCD Drive Ripple Voltage Min 3.0 Typ. 3.3 160 Max 3.6 0.7 2 300 Units [V] [mA] [W] [A] [mVp-p] All black pattern, 60Hz Black pattern, 60Hz Condition
Note1
Note: 1.Measure Condition Figure 12 VDD rising time
2.VDD Power Dip Condition Figure 13 VDD Power Dip
automatically.
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 17 of 28 Tel:0512-******** Fax:0512-********
；
≤
，
≤ ＜
If VTH
VDD
Vmin then td 10ms
when the voltage return to normal our panel must revive
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 18/28 07 Issue Date 2010/05/20 Revision
9 Power ON/OFF Sequence
VDD power, interface signals, and lamp on/off sequence are shown in Figure 12.Signals shall be Hi-Z state or low level when VDD is off. Figure 12 Power Sequence
T6
Table 9 Power Sequencing Requirements Parameter VDD Rise Time VDD Good to Signal Valid Signal Valid to Backlight On Backlight Power On Time Backlight VDD Good to System PWM On System PWM ON to Backlight Enable ON Backlight Enable Off to System PWM Off System PWM Off to B/L Power Disable Backlight Power Off Time Backlight Off to Signal Disable Signal Disable to Power Down VDD Fall Time Power Off Symbol T1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11 T12 T13 Unit ms ms ms ms ms ms ms ms ms ms ms ms ms min 0.5 30 200 0.5 10 10 0 10 -200 0 -500 typ --------10 --10 -max 10 90 ------30 -50 30 --
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 18 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 19/28 07 Issue Date 2010/05/20 Revision
10
Mechanical Characteristics
Figure 13 Reference Outline Drawing (Front Side)
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 19 of 28 Tel:0512-******** Fax:0512-********
昆山龙腾光电有限公司
InfoVision Optoelectronics ( Kunshan ) Co.,LTD.
Document Title Document No. M101NWT2 R2 Product Information Page No. 20/28 07 Issue Date 2010/05/20 Revision Figure 14 Reference Outline Drawing (Back Side)
________________________________________________________________________
NO.1 Long Teng Road, KunShan City, JiangSu, China InfoVision Optoelectronics (Kunshan) Co., LTD Page 20 of 28 Tel:0512-******** Fax:0512-********