PS2532L-1-E4-A中文资料

PHOTOCOUPLER

PS2532-1,-2,-4,PS2532L-1,-2,-4

HIGH COLLECTOR TO EMITTER VOLTATGE

HIGH ISOLATION VOLTAGE MULTI PHOTOCOUPLER SERIES

?NEPOC Series ?

DESCRIPTION

The PS2532-1, -2, -4 and PS2532L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor.

The PS2532-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2532L-1, -2, -4 are lead bending type (Gull-wing) for surface mount.

FEATURES

? High collector to emitter voltage (V CEO = 300 V) ? High Isolation voltage (BV = 5 000 Vr.m.s.) ? High current transfer ratio (CTR = 4 000 % TYP.) ? High-speed switching (t r, t f = 100 μs TYP.)

? Ordering number of tape product: PS2532L-1-E3, E4, F3, F4, PS2532L-2-E3, E4 ? Safety standards ? UL approved: File No. E72422 (S) ? BSI approved: No. 8221/8222 ? CSA approved: No. CA 101391 ? NEMKO approved: No. P9******* ? SEMKO approved: No. 9824187/01-02 ? DEMKO approved: No. 307863 ? FIMKO approved: No. F1 11397 ? VDE0884 approved (Option)

APPLICATIONS

? Telephone, Exchange equipment ? FAX/MODEM

The mark shows major revised points.

Document No. PN10232EJ01V0DS (1st edition) (Previous No. P11434EJ6V0DS00) Date Published February 2003 CP(K)

PS2532-1,-2,-4,PS2532L-1,-2,-4

PACKAGE DIMENSIONS (Unit : mm)

DIP Type (New package)

PS2532-1

TOP VIEW

3.5±0.3

4.15±0.4

3.2±0.4 2.54

1.25±0.15

0.50±0.100.25 M

4.6±0.35

6.5±0.5

0 to 15?7.62

0.25+0.1

–0.05

1. Anode

2. Cathode

3. Emitter

4. Collector

Caution New package 1-ch only

DIP Type

PS2532-4

PS2532-1

TOP VIEW

9.7±0.5

6.5±0.5

3.5±0.3

4.15±0.4

3.3±0.5 2.54

1.25±0.15

0.50±0.100.25 M

0 to 15?7.62

0.25+0.1

–0.05

PS2532-2

4.6±0.5

6.5±0.5

3.5±0.3

4.15±0.4

3.3±0.5 2.54

1.25±0.15

0.50±0.100.25 M

0 to 15?7.62

0.25+0.1

–0.05

19.8±0.5

6.5±0.5

0 to 15?7.62

0.25+0.1

–0.05

3.5±0.3

4.15±0.4

3.3±0.5 2.54

1.25±0.15

0.50±0.100.25 M

TOP VIEW

123

45678

161514131211109

348

1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector

1. Anode

2. Cathode

3. Emitter

4. Collector

1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector

Data Sheet PN10232EJ01V0DS

PS2532-1,-2,-4,PS2532L-1,-2,-4

Lead Bending Type (New package)

PS2532L-1

TOP VIEW

0.25 M

4.6±0.35

6.5±0.5

3.5±0.3

2.54

1.25±0.15

0.15

0.9±0.25

9.60±0.4

0.25+0.1 –0.05

0.1+0.1 –0.05

1. Anode

2. Cathode

3. Emitter

4. Collector

Caution New package 1-ch only

Lead Bending Type

PS2532L-2

TOP VIEW

PS2532L-1

TOP VIEW

PS2532L-4

TOP VIEW

4.6±0.5

6.5±0.5

0.25 M

3.5±0.3

2.54

1.25±0.15

0.15

0.9±0.25

9.60±0.4

0.25+0.1 –0.05

0.1+0.1

–0.05

9.7±0.5

6.5±0.5

2.541.25±0.150.25 M

0.15

3.5±0.3

0.9±0.259.60±0.4

0.25+0.1

–0.05

0.1+0.1 –0.05

19.8±0.5

6.5±0.5

2.541.25±0.150.25 M

3.5±0.3

0.15

0.9±0.25

9.60±0.4

0.25+0.1 –0.05

0.1+0.1 –0.05

2345678

161514131211109

234

1, 3. Anode

2, 4. Cathode 5, 7. Emitter 6, 8. Collector

1. Anode

2. Cathode

3. Emitter

4. Collector

1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector

Data Sheet PN10232EJ01V0DS 3

PS2532-1,-2,-4,PS2532L-1,-2,-4

MARKING EXAMPLE

2532M 003

PS2532-2M 003

F PS2532-1

PS2532-2, -4

Assembly Lot

Week Assembled Year Assembled (Last 1 Digit)In-house Code CTR Rank Code No. 1 pin Mark

Package New PKG

Standard PKG Made in Japan Made in Taiwan No. 1 pin Mark

M F

Week Assembled Year Assembled (Last 1 Digit)In-house Code CTR Rank Code

Package New PKG

Standard PKG Made in Japan Made in Taiwan

003

M 003Blank Blank Country Assembled Type Number Assembly Lot

Data Sheet PN10232EJ01V0DS

PS2532-1,-2,-4,PS2532L-1,-2,-4 ORDERING INFORMATION (Solder Contains Lead)

Part Number Package Packing Style Safety Standard

Approval Application Part Number*1

PS2532-1 4-pin DIP Magazine case 100 pcs Standard products PS2532-1

PS2532L-1 (UL, CSA, BSI,

PS2532L-1-E3 Embossed Tape 1 000 pcs/reel NEMKO, SEMKO,

PS2532L-1-E4 DEMKO,

FIMKO

PS2532L-1-F3 Embossed Tape 2 000 pcs/reel approved)

PS2532L-1-F4

PS2532-2 8-pin DIP Magazine case 45 pcs PS2532-2

PS2532L-2

PS2532L-2-E3 Embossed Tape 1 000 pcs/reel

PS2532L-2-E4

PS2532-4 16-pin DIP Magazine case 20 pcs PS2532-4

PS2532L-4

PS2532-1-V 4-pin DIP Magazine case 100 pcs VDE0884 approved PS2532-1

PS2532L-1-V products

(Option)

PS2532L-1-V-E3 Embossed Tape 1 000 pcs/reel

PS2532L-1-V-E4

PS2532L-1-V-F3 Embossed Tape 2 000 pcs/reel

PS2532L-1-V-F4

PS2532L-2-V 8-pin DIP Magazine case 45 pcs PS2532-2

PS2532L-2-V

PS2532L-2-V-E3 Embossed Tape 1 000 pcs/reel

PS2532L-2-V-E4

PS2532-4-V 16-pin DIP Magazine case 20 pcs PS2532-4

PS2532L-4-V

*1 For the application of the Safety Standard, following part number should be used.

Data Sheet PN10232EJ01V0DS 5

PS2532-1,-2,-4,PS2532L-1,-2,-4 ORDERING INFORMATION (Pb-Free)

Part Number Package Packing Style Safety Standard

Approval Application Part Number*1

PS2532-1-A 4-pin DIP Magazine case 100 pcs Standard products PS2532-1 PS2532L-1-A (UL, CSA, BSI,

PS2532L-1-E3-A Embossed Tape 1 000 pcs/reel NEMKO, SEMKO,

PS2532L-1-E4-A DEMKO,

FIMKO

PS2532L-1-F3-A Embossed Tape 2 000 pcs/reel approved)

PS2532L-1-F4-A

PS2532-2-A 8-pin DIP Magazine case 45 pcs PS2532-2 PS2532L-2-A

PS2532L-2-E3-A Embossed Tape 1 000 pcs/reel

PS2532L-2-E4-A

PS2532-4-A 16-pin DIP Magazine case 20 pcs PS2532-4 PS2532L-4-A

PS2532-1-V-A 4-pin DIP Magazine case 100 pcs VDE0884 approved PS2532-1 PS2532L-1-V-A products

(Option)

PS2532L-1-V-E3-A Embossed Tape 1 000 pcs/reel

PS2532L-1-V-E4-A

PS2532L-1-V-F3-A Embossed Tape 2 000 pcs/reel

PS2532L-1-V-F4-A

PS2532L-2-V-A 8-pin DIP Magazine case 45 pcs PS2532-2 PS2532L-2-V-A

PS2532L-2-V-E3-A Embossed Tape 1 000 pcs/reel

PS2532L-2-V-E4-A

PS2532-4-V-A 16-pin DIP Magazine case 20 pcs PS2532-4 PS2532L-4-V-A

*1 For the application of the Safety Standard, following part number should be used.

Data Sheet PN10232EJ01V0DS

PS2532-1,-2,-4,PS2532L-1,-2,-4

ABSOLUTE MAXIMUM RATINGS (T A = 25 °C, unless otherwise specified)

Ratings

Parameter Symbol

PS2532-1,PS2532L-1 PS2532-2, -4,PS2532L-2, -4

Unit

Diode Forward Current (DC) I F 80 mA Reverse Voltage V R 6 V

Power Dissipation Derating

?P D /°C 1.5 1.2 mW °C

Power Dissipation P D 150 120 mW/ch

Peak Forward Current

I FP 1 A Transistor Collector to Emitter Voltage V CEO 300 V

Emitter to Collector Voltage

V ECO 0.6 V Collector Current I C 150 mA/ch

Power Dissipation Derating

?P C /°C 3.0 2.4 mW/°C

Power Dissipation P C 300 240 mW/ch Isolation Voltage

BV 5 000 Vr.m.s. Operating Ambient Temperature T A ?55 to +100 °C Storage Temperature

T stg

?55 to +150

°C

*1 PW = 100 μs, Duty Cycle = 1 %

*2 AC voltage for 1 minute at T A = 25 °C, RH = 60 % between input and output

Data Sheet PN10232EJ01V0DS 7

PS2532-1,-2,-4,PS2532L-1,-2,-4

ELECTRICAL CHARACTERISTICS (T A = 25 °C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit

Diode Forward Voltage

V F

I F = 10 mA 1.15 1.40 V

Reverse Current I R V R = 5 V

5 μA

Terminal Capacitance C t V = 0 V, f = 1.0 MHz 30 pF Transistor Collector to Emitter Dark Current I CEO

V CE = 300 V, I F = 0 mA

400 nA Coupled Current Transfer Ratio (I C /I F )

CTR I F = 1 mA, V CE = 2 V 1 500 4 000 6 500 %

Collector Saturation Voltage

V CE(sat)

I F = 1 mA, I C = 2 mA

1.0 V Isolation Resistance R I-O V I-O = 1.0 kV DC 1011

? Isolation Capacitance C I-O V = 0 V, f = 1.0 MHz

0.6

Rise Time *1

t r V CC = 5 V, I C = 10 mA, R L = 100 ?

100 μs Fall Time

*1t f

100

*1 Test circuit for switching time

(PW = 1 ms,

Pulse input

V CC

V OUT

R L = 100 ?

50 ?

I F

Data Sheet PN10232EJ01V0DS

PS2532-1,-2,-4,PS2532L-1,-2,-4

TYPICAL CHARACTERISTICS (T A = 25 °C, unless otherwise specified)

Ambient Temperature T A (?C)

T r a n s i s t o r P o w e r D i s s i p a t i o n P C (m W )

TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE

PS2532-1PS2532L-1

3.0 mW/?C

PS2532-2, -4PS2532L-2, -42.4 mW/?C

DIODE POWER DISSIPATION vs.AMBIENT TEMPERATURE

Ambient Temperature T A (?C)D i o d e P o w e r D i s s i p a t i o n P D (m W )

PS2532-1PS2532L-1

1.5 mW/?C

PS2532-2, -4PS2532L-2, -41.2 mW/?C

COLLECTOR CURRENT vs.

COLLECTOR TO EMITTER VOLTAGE

Collector to Emitter Voltage V CE (V)

C o l l e c t o r C u r r e n t I C (m A )

I F = 0.5 mA

1.0 m A

1.5 m A

2.0 m

A 2.5

m A 3.0

m A

3.5 m A

4.0 m A

5.0

m A 4.5 mA V CE = 300 V

COLLECTOR TO EMITTER DARK

CURRENT vs. AMBIENT TEMPERATURE

Ambient Temperature T A (?C)C o l l e c t o r t o E m i t t e r D a r k C u r r e n t I C E O (A )

–50

–25

100

100 n 10 n 1 n 100 p

10μ1μCOLLECTOR CURRENT vs.

COLLECTOR SATURATION VOLTAGE

Collector Saturation Voltage V CE(sat) (V)

C o l l e c t o r C u r r e n t I C (m A )

I F = 5.0 m A

2.0 m A

1.0 m A

0.5 m A

FORWARD CURRENT vs.FORWARD VOLTAGE

Forward Voltage V F (V)F o r w a r d C u r r e n t I F (m A )

+25 ?C 0 ?C –25 ?C –55 ?C

T A = +100 ?C

+75 ?C +50 ?C

Data Sheet PN10232EJ01V0DS 9

PS2532-1,-2,-4,PS2532L-1,-2,-4

NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE

Ambient Temperature T A (?C)N o r m a l i z e d C u r r e n t T r a n s f e r R a t i o C T R

1.2

0.80.40.0

1.00.60.2–50

–25

100

;;;;;;;;;;;;;;;;

Normalized to 1.0 at T A = 25 ?C,

I F = 1 mA, V CE = 2 V

SWITCHING TIME vs.LOAD RESISTANCE

Load Resistance R L (?)

S w i t c h i n g T i m e t ( s )

μV CC = 10 V, I C = 10 mA

t r

t d t s

t f

Forward Current I F (mA)

C u r r e n t T r a n s f e r R a t i o C T R (%)

CURRENT TRANSFER RATIO vs.FORWARD CURRENT

V CE = 2 V

Sample A

LONG TERM CTR DEGRADATION

Time (Hr)

C T R (R e l a t i v e V a l u e )

I F = 1 mA,T A = 25 ?C I F = 1 mA,T A = 60 ?C

FREQUENCY RESPONSE

Frequency f (kHz)

N o r m a l i z e d G a i n G v

R L = 1 k ?

10 ?

100 ?

V CE = 4 V, V in = 0.1 V p-p

1 k ? 1 F μR L

V in

V out 47 ?

Remark The graphs indicate nominal characteristics.

Data Sheet PN10232EJ01V0DS

PS2532-1,-2,-4,PS2532L-1,-2,-4

TAPING SPECIFICATIONS (Unit : mm)

Tape Direction

Outline and Dimensions (Tape)

Outline and Dimensions (Reel)

PS2532L-1-E3

PS2532L-1-E4

1.55±0.1

2.0±0.14.0±0.1

1.75±0.1

4.5 MAX.

4.0±0.10.4

5.3±0.1

8.0±0.1

7.5±0.1

16.0±0.3

10.3±0.1

1.5+0.1–0

φPacking: 1 000 pcs/reel

2.0±0.5

R 1.0

13.0±0.2

φ21.0±0.8

φ254±2.0

80.0±1.0

2.0±0.5

φφ15.9 to 19.4Outer edge of flange

21.5±1.0

17.5±1.0

Data Sheet PN10232EJ01V0DS 11

PS2532-1,-2,-4,PS2532L-1,-2,-4

Tape Direction

PS2532L-1-F3

PS2532L-1-F4

Outline and Dimensions (Tape)

1.55±0.1

2.0±0.14.0±0.1

1.75±0.1

4.5 MAX.

4.0±0.10.4

5.3±0.1

8.0±0.1

7.5±0.1

16.0±0.3

10.3±0.1

1.5+0.1–0

Outline and Dimensitons (Reel)

Packing: 2 000 pcs/reel

2.0±0.5

R 1.0

13.0±0.2

φ21.0±0.8

φ330±2.0

100±1.0

2.0±0.5

φφ15.9 to 19.4Outer edge of flange

21.5±1.0

17.5±1.0

Data Sheet PN10232EJ01V0DS

PS2532-1,-2,-4,PS2532L-1,-2,-4

Tape Direction

PS2532L-2-E3

PS2532L-2-E4

Outline and Dimensions (Tape)

1.55±0.1

2.0±0.14.0±0.1

1.75±0.1

4.5 MAX.

10.4±0.1

12.0±0.1

Outline and dimensions (Reel)

Packing: 1 000 pcs/reel

330±2.0

100±1.0

2.0±0.5

13.0±0.2

R 1.0

21.0±0.8

2.0±0.5

1.5+0.1–0

7.5±0.1

10.3±0.1

16.0±0.3

4.0±0.1

0.3

15.9 to 19.4Outer edge of flange

17.5±1.021.5±1.0

Data Sheet PN10232EJ01V0DS 13

PS2532-1,-2,-4,PS2532L-1,-2,-4

NOTES ON HANDLING

1. Recommended soldering conditions

(1) Infrared reflow soldering ? Peak reflow temperature 260°C or below (package surface temperature) ? Time of peak reflow temperature 10 seconds or less ? Time of temperature higher than 220°C 60 seconds or less ? Time to preheat temperature from 120 to 180°C 120±30 s

? Number of reflows Three

? Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)

120±30 s (preheating)

220?C

180?C

P a c k a g e S u r f a c e T e m p e r a t u r e T (?C )

Time (s)

Recommended Temperature Profile of Infrared Reflow

(heating)to 10 s

to 60 s

260?C MAX.120?C

(2) Wave soldering ? Temperature 260°C or below (molten solder temperature) ? Time

10 seconds or less

? Preheating conditions 120°C or below (package surface temperature)

? Number of times One (Allowed to be dipped in solder including plastic mold portion.)

? Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)

(3) Cautions ? Fluxes

Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

2. Cautions regarding noise

Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.

Data Sheet PN10232EJ01V0DS

PS2532-1,-2,-4,PS2532L-1,-2,-4

USAGE CAUTIONS

1.Protect against static electricity when handling.

2.Avoid storage at a high temperature and high humidity.

Data Sheet PN10232EJ01V0DS15

PS2532-1,-2,-4,PS2532L-1,-2,-4

SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884)

Parameter Symbol

Speck

Unit Application classification (DIN VDE 0109)

for rated line voltages ≤ 300 Vr.m.s. for rated line voltages ≤ 600 Vr.m.s. IV III

Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength

maximum operating isolation voltage

Test voltage (partial discharge test, procedure a for type test and random test) U pr = 1.2 × U IORM, P d< 5 pC U IORM

U pr

890

1 068

V peak

Test voltage (partial discharge test, procedure b for all devices test) U pr = 1.6 × U IORM, P d< 5 pC U pr 1

424 V peak

Highest permissible overvoltage U TR 6

000 V peak Degree of pollution (DIN VDE 0109) 2

Clearance distance > 7.0 mm Creepage distance > 7.0 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI 175

Material group (DIN VDE 0109) III a

Storage temperature range T stg?55 to +150 °C Operating temperature range T A–55 to +100 °C Isolation resistance, minimum value

V IO = 500 V dc at T A = 25 °C

V IO = 500 V dc at T A MAX. at least 100 °C Ris MIN.

Ris MIN.

1012

1011

Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve)

Package temperature

Current (input current I F, Psi = 0)

Power (output or total power dissipation) Isolation resistance

V IO = 500 V dc at T A = 175 °C (Tsi)

Tsi

Isi

Psi

Ris MIN.

175

400

700

109

°C

?Data Sheet PN10232EJ01V0DS

PS2532-1,-2,-4,PS2532L-1,-2,-4

APPLICATION FOR TELEPHONE (EXAMPLE)

LINE

Bell Ringing Signal (75 Vr.m.s., 16 Hz)

PS2505/PS2506PS2705/PS2707PS2805etc.

Bell Ringing Detect

V CC

Line Observe

Dial Pulse PS2532/PS2533Generator PS2732/PS2733 PS2832/PS2833

PS2521PS2525

Dialer Circuit

OUT

CPU

OCMOS FET PS7xxx

Speech Circuit

Data Sheet PN10232EJ01V0DS 17

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817

Telephone: (408) 919-2500

Facsimile: (408) 988-0279

Subject: Compliance with EU Directives

CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE.

CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive.

This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.

Restricted Substance

per RoHS Concentration Limit per RoHS

(values are not yet fixed)

Concentration contained

in CEL devices

-A -AZ

Lead (Pb) < 1000 PPM

Not Detected (*) Mercury < 1000 PPM Not Detected

Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected

PBB < 1000 PPM Not Detected

PBDE < 1000 PPM Not Detected

If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.

Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis.

See CEL Terms and Conditions for additional clarification of warranties and liability.