如何测试SSAS

如何测试SSAS,具体操作步骤如下：

1.Push the TEST button of IME, Then the button lights.

按下绿色TEST按钮，TEST灯亮

2.Push down SECURITY button. Light of the button changes from lighting to blinking after 30

seconds passed and then starts TEST transmission.

按一下SECURITY红色按钮，30秒后TRANSMIT 灯瞬间闪烁一次熄灭后，绿色TEST按钮灯继续闪烁，熄灭后，则表示TEST报文已发出。

3.Blinking of TEST button stops and lights with normal status,when the test transmission is

completed. Press SECURITY button again.

绿色TEST 灯停止闪烁但保持亮着的状态，再按一下SECUITY 红色按钮

4.Push TEST button. Light of button disappears

按一下TEST按钮，灯熄灭。测试完成。