Meeting Recording System via Multimodal Sensing

Meeting Recording System via Multimodal Sensing
Meeting Recording System via Multimodal Sensing

Meeting Recording System via Multimodal Sensing

Shingo Tokunaga,Yoshimichi Ito,Naoko Nitta and Noboru Babaguchi Graduate School of Engineering,Osaka University,2-1Yamada-oka Suita Osaka565-0871,JAPAN

Abstract.In this paper,we propose a recording system for a round-table meeting using micro-

phone array as well as omnidirectional video camera.These equipments are located at the center

of the table,and record all the activity during a meeting.They are also used for estimating the

directions of speakers,and such data is exploited for reproducing the frontal image of the speaker

from omnidirectional image.Experimental results using the prototype system are also shown.

1Introduction

In usual case,the results and the progress of a meeting,such as what is determined,and who said what, are summerized in a meeting log and are recorded by paper-based media.The paper-based media is useful from the viewpoint of simplicity.However,it has a performance limitation when we want to make a precise record of vivid activities of human communications and the environment during a meeting, such as the situation of discussions,the behavior of speakers(smile,angry,confused,excited,etc.)and that of other participants(nod,agree,disagree,sleep,etc.).

Recently,in order to record such an human activity during a meeting,an inteligent log system called multimedia log system has been proposed[1],[2],[3],[4],[5].A system for recording lectures has been also proposed and is used for distance lectures[6].The multimedia log consists of two types of data,namely, the data in which the contents of utterances of speakers are structured,and the audio/video data at each event during the meeting.By linking these two types of data,a log user can observe the expressions and appearances of speakers together with the contents of the meeting.

The meeting environment of our concern is a round-table meeting with a few participants.In im-plementing a meeting recording system,the following problems due to the sensing environment arise:a large scale set is required,even for a small scale meeting,to sense the apperarance of each participant; it is di?cult to sense the frontal view image of each speaker since the video cameras are located behind the participants to avoid disterbance of the meeting.Therefore,it is very important to construct the meeting recording system free from the sensing environment problems.

In order to overcome the above di?culties,we propose a meeting recording system using omnidirec-tional video camera[7],[8],[9]and microphone array[10].They are located at the center of the table,and record all the activities during a meeting.They are also used for estimating the directions of speakers, and the data is exploited for reproducing the frontal view image of the speaker with high?delity.

The above idea using omnidirectional video camera and microphone array has been also proposed by [2]and[5].However,they only use audio data for speaker localization,and the experimental evaluation for their localization method have not yet been done.What distinguishes our localization method from the above ones is that we do not only use the audio data,but also utilize the video data for speaker localization.It is expected that the use of such multimodal sensing enables us to estimate the directions of speakers more accurately.In this paper,we focus on the topic of speaker locallization using multimodal sensing,and that of the experimental evaluation of our method.The topic of making a meeting log is ommitted because of space limitation.

2Speaker localization via multimodal sensing

The data?ow of speaker localization using multimodal sensing and the process for making the frontal view images of speakers are shown in Fig.1.

The audio data is recorded by the microphone array system,and is used for estimating the location of a speaker.As an algorithm for the speaker localization,we use the cross-correlation method.The audio data is also used for making the contents of a meeting log,and is storaged as structured data which records the contents of utterances of speakers.

The video data is captured by the omnidirectional video camera with a hyperboloidal mirror[7]. The omnidirectional video camera is capable of capturing a360-degree horizontal view?eld scene at a time,and can be applied for analysis of human behaviors and for surveillance systems[11].Since

the omnidirectional images captured by the camera can easily be transformed into panoramic images and perspective images[7],we can easily obtain the frontal view image of a speaker provided that the direction of the speaker is given.

The omnidirectional images are also utilized for speaker https://www.360docs.net/doc/b917320397.html,puting the frame di?erence of successive image sequences,we can estimate the location of each https://www.360docs.net/doc/b917320397.html,ing this data together with the estimated direction by audio data,we can estimate the directions of speakers more accurately.

Fig.1.Data?ow

In the following subsections,we describe a method for estimating the location of a speaker by using audio and video data.

2.1Localization of a speaker using audio data

The microphone array system used for estimating the location of a speaker is shown in Fig.2,and we adopt the cross-correlation method for the estimation.

Fig.2.microphone array

Let f i (t )(i =1,2)be an audio signal obtained by microphone M i ,and D i be the distance between the speaker and M i .Suppose that M 1detects a speaker’s voice at ?rst,and after that,M 2detects the voice n ×?t [s]later,where ?t is a sampling period.

From audio signals f 1(t )and f 2(t ),we can estimate the time delay element n as a natural number which maximizes the cross-correlation function of f 1(t )and f 2(t )given by

∑t

f 1(t )f 2(t +n ).(1)

In this case,the di?erence D =D 2?D 1is calculated by

D =V s n ×?t,(2)

where V s is the sound speed.From this,we can determine the angle θin Fig.2according to the following equation:

θ=cos ?1(D/W ),(3)

and thus,we can estimate the direction of the speaker viewed from the center of the microphone array system.

2.2Localization of participants using video data

Besides the utterances of speakers,there are a lot of sound sources in a meeting environment such as air conditioners and business machines.Therefore,there is a possibility that the audio-based localization method fails to estimate the direction of a speaker.For this reason,another localization method should be required which assists the audio-based localization.In order to support the audio-based method,we use video data and extract human region from the video image.By this,we can estimate the locations of participants,and such information can be utilized for speaker localization.The method uses the frame di?erence of image sequence as shown in Fig.3.

t = 15 [frames]

t = 0

t = -

15 [frames]

Difference

Fig.3.Human region extraction by frame di?erence

First,prepare the following three images:current image (t =0),the preceding image (t =?15),and the subsequent image (t =15).Next,make the frame di?erence between the current and the preceding images (we call the image as image 1).Similarly,make the frame di?erence between the current and the subsequent images (image 2).By making the and-operation of image 1and image 2,we can extract a human region of current image.

3Experimental results

In this section,we show experimental results using the prototype system and show the e?ectiveness of the proposed method.The meeting environment is shown in Fig.4.There are four participants in Fig. 4,where a person sitting by the long table is an operator of the system,and the other three persons are meeting participants.In this experiment,we estimate the direction of speakers in the meeting.

Participant

Omni-Directional

Camera

Microphone-array

Fig.4.Meeting environment

The results of the participants localization using frame di?erence of video image sequence is shown in Fig.5,where four conic sectors are obtained as human regions.In these regions,three conic regions corresponds to the actual locations of participants,whereas one conic sector does not indicate the par-ticipant but the lights on the ceiling.This result shows that participants localization via video image becomes di?cult when the movements of the participants are small and the in?uence of the lighting and the re?ections in the room are large.

Fig.5.Experimental result of human region extraction

The results of the speaker localization via multimodal sensing(both the audio and the video data are used)is shown in Fig.6,where the result of the single use of audio-based localization as well as that of the single use of video-based one is also shown.The location of a speaker is chosen from the estimated locations of participants which is the nearest from the estimated direction via audio-based speaker localization.

Fig.6.Experimental results for speaker localization

From the results,it is shown that when only the audio-based localization is used,the estimation result does not seem accurate enough since the estimated directions of speakers varies very fast.This would be due to that when no one speaks,the in?uence of the noise of a refrigerator and an air conditioner becomes large.On the other hand,the participants localization using video-based estimation works well, and then,by using the data together with the audio-based estimation,the speaker localization becomes more accurate than the single use of the audio-based estimation.

Using the above data and the omnidirectional video images,we can obtain the frontal images of speakers.For example,the frontal image of the speaker at around50th frame(in Fig.6)is shown in Fig.7.Thus,we can observe the expressions and the appearances of speakers at each event during the meeting.

Fig.7.Frontal image of a speaker

4Conclusion

In this paper,we propose a meeting recording system using multimodal sensing which consists of the omnidirectional video camera and the microphone array.The method for the speaker localization using the audio and the video data is also presented,and the e?ectiveness of the method is shown through the experimental results.By using the system,we can sense the frontal view images of speakers,and thus,it is expected that we can record the vivid activity of human communications in the meeting environment.

At the present,using JAVA[12],we are constructing an application for making a GUI-based mul-timedia log which enables the user to watch the meeting environment and to retrieve an event in the meeting[13],[14],[15].

References

1.P.Chiu,A.Kapuskar,S.Reitmeier,and L.Wilcox,“Meeting Capture in a Media Enriched Conference

Room,”Proceedings of the Second International Workshop on Cooperative Buildings(CoBuild’99).Lecture Notes in Computer Science,Vol.1670Springer-Verlag,pp.79-88,Oct.1999.

2. D.Lee,B.Erol,J.Graham,J.J.Hull and N.Murata,“Portable Meeting Recorder,”Proceedings of ACM

Multimedia2002,pp.493–502,Juan Les Pins,France,Dec.2002.

3.W.Geyer,H.Richter,and G.D.Abowd,“Making Multimedia Meeting Records More Meaningful,”Pro-

ceedings of the IEEE International Conference on Multimedia and Expo(ICME2003),vol.2,pp.669–672, Baltimore,MD,Jul.2003.

4. B.Erol,D.Lee and J.J.Hull,“Multimodal Summarization of Meeting Recorder,”Proceedings of the IEEE

International Conference on Multimedia and Expo(ICME2003),Baltimore,MD,Jul.2003.

5.S.Tokunaga,Y.Ito,N.Nitta,and N.Babaguchi,“Multimedia Sensing of Meeting Environment,”(in

Japanese)The5th Symposium on Intelligent Media Technology Supporting Natural Human Communica-tions,Tokyo,Jan.2005.

6.Y.Kameda,K.Ishizuka,and M.Minoh,“A Study for Distance Learning Service–TIDE Project–,”Pro-

ceedings of the IEEE International Conference on Multimedia and Expo(ICME2000),vol.3,pp.1237–1240, New York City,NY,Jul.2000.

7.K.Yamazawa,N.Yokoya,“Detecting moving objects with an omnidirectional camera based on adaptive

background subtraction,”Proceedings of13th Scandinavian Conf.on Image Analysis(SCIA2003),pp.969–974,Goteborg,Sweden,Jul.2003.

8.Y.Onoe,K.Yamazawa,H.Takemura,and N.Yokoya,“Telepresence by Real-Time View-Dependent Image

Gen-eration from Omnidirectional Video Streams,”Computer Vision and Image Understanding,vol.71,no.

2,pp.154–165,1998.

9.Y.Yagi,M.Yachida“Real-Time Omnidirectional Image Sensors,”International Journal of Computer Vision,

vol.58,no.3,pp.173–207,July-August,2004.

10.T.Nishiura,T.Yamada,S.Nakamura,and K.Shikano:“Localization of Multiple Sound Sources Based on

CSP Analysis with a Microphone Array,”Proceedings of25th IEEE International Conference on Acoustics, Speech,and Signal Processing(ICASSP2000),pp.1053-1056,Istanbul,Turkey,Jun.2000.

11.N.Babaguchi,Y.Fujimoto,K.Yamazawa and N.Yokoya,“A System for Visualization and Summarization of

Omnidirectional Surveillance Video,”Proceedings of8th International Workshop on Multimedia Information Systems(MIS2002),pp.18–27,Tempe,AZ,Oct.2002.

12.Sun Microsystems,Java Media Framework API(JMF),https://www.360docs.net/doc/b917320397.html,/products/java-media/jmf/

13. B.Erol,J.J.Hull and D.Lee,“Linking Presentations with their Symbolic Source Documents:Algorithm

and Applications,”Proceedings of ACM Multimedia2003,pp.498–507,Berkeley,CA,Nov.2003.

14. B.Erol and J.J.Hull,“Linking Presentation Documents Using Image Analysis,”Proceedings of Asilomar

Conference on Signals,Systems,and Computers,Paci?c Grove,CA,Sept.2003.

15.B,Erol,D.Lee and J.J.Hull,“Retrieval of Presentation Recordings with Digital Camera Images,”Pro-

ceedings of IEEE Conference on Computer Vision and Pattern Recognition(CVPR2004),Washington,D.C.

Jun.2004.

软件工程-银行储蓄管理系统源代码

package src.day01; public class ACC { //父类,以下是共有属性和方法 //卡号 protected static long id; // 名字 protected static String name; // 身份证 protected static String personId; //电子邮件 protected static String email; // 密码 protected static long password; //余额 protected static double balance; public ACC(){ } public ACC(long id,String name,String personId,String email,long password,double balance ){ this.id = id; https://www.360docs.net/doc/b917320397.html, = name; this.personId = personId; this.email = email; this.password = password; this.balance = balance; } // 存款方法 public static void deposit(double money){ balance += money; System.out.println("存款成功,你存入的金额为:" + money); } public long getId() { return id; } public void setId(long id) { this.id = id; } public String getName() { return name; } public void setName(String name) { https://www.360docs.net/doc/b917320397.html, = name; } public String getPersonId() {

全能管家多银行资金管理系统(IBS)宣传手册

全能管家多银行资金管理系统(IBS) 宣传手册 1

2

全能管家多银行资金管理系统( IBS系统) 系统背景 ”资金管理”——顾名思义是指企业和”钱”相关的所有活动的 一种统称。从企业资金管理发展的角度分析, 企业资金管理最初始的 目标就是加快收付款的速度、效率, 加快货币资金的流转。随着企业 的发展, 企业对资金的需求量大大增加, 这时资金管理所表现出来的主 要需求转换为对外部融资的需求, 这时合理的银企关系、财务资金成 本地控制、资产负债比率控制等演化为企业资金管理最重要的需求。 伴随着企业快速成长以及和资本市场的打通, 企业积累了大量的 财富, 同时货币市场的变幻莫测等, 将企业资金管理或者说财务管理人 员从筹集资金向如何将这些财富进行合法、合理的运用以及货币的保 值增值服务需求上转变。 为应对企业资金管理需求的变化和提升, 基于以客户需求为产品 创新源泉和动力的服务理念, 为更好地满足企业资金管理需求, 北京银 行汇聚财资管理智慧, 联合专业IT合作伙伴, 倾力奉献全能管家多银 行资金管理系统( IBS系统) , 致力于为北京银行企业客户伙伴提供一 站式资金、金融管理服务。 系统概述 全能管家多银行资金管理系统( IBS系统) 经过多银行数据服务程 序实现企业和各银行机构信息直通式处理, 实现企业多银行账户资金 的集中管控与统一划拨, 以全面、专业、便捷、灵活的系统服务, 满 3

足企业掌控多行账户信息、明晰资金流时效性、有效量化资金流、 加强风险管控等多项资金管理需求。 IBS系统主要功能包括: 统一数据服务平台、现金流管理、资金 计划管理、资金结算管理、内部银行管理、金融交易管理、投资理 财平台、综合查询系统等多个模块组成。 系统特点: ●为企业提供一站式金融服务: 北京银行IBS系统是一套整合了现代商业银行结算、信息、信 贷、理财服务以及企业资金管理各种需求的面向企业应用的专业资金 管理系统平台。 ●以企业流动性管理为核心: 北京银行IBS系统经过对企业多银行账户的统一管理实现企业对 账户资金实时监控管理的需求, 还进一步经过资金计划预算对企业未 来现金流和资金盈缺情况提供流量分析和平衡试算等功能, 方便企业 资金决策和头寸平衡。 ●先进的技术架构和部署模式: 北京银行IBS系统采用最先进的B/S系统架构, 真正做到单点部署, 多点使用, 同时客户端做到零维护, 方便企业的使用和维护。 应用价值 ●企业资金信息实时掌控 随着企业不断发展壮大, 资金需求、流量都不断加大, 如何能够透 4

银行储蓄管理系统

燕山大学三级项目设计说明书 题目:银行储蓄管理系统 学院(系):信息学院 年级专业:教育技术学15—1 学号: 学生姓名:付叶禹 郑凯峰 李文悦 王宇晨 李晓晗 指导教师:梁顺攀 教师职称:副教授 燕山大学三级项目设计(论文)任务书 院(系):信息学院教学单位:

说明:此表一式四份,学生、指导教师、基层教学单位、系部各一份。 年月日燕山大三级项目设计评审意见表

摘要 论文阐述的是在SQL server 2008开发环境下对银行储蓄管理系统的设计。希望通过该系统的应用,能促使银行储蓄管理工作的规范化、标准化和自动化,提高管理水平和管理效率,为管理工作提供更完善的信息服务和一个成功的信息管理系统。数据库是一个非常重要的条件和关键技术,管理系统所涉及的数据库设计分为:数据库需求分析、概念设计、逻辑设计过程。 本论文叙述了数据库设计的全过程。 主要分为: 1. 系统需求分析与功能设计阶段,包括功能需求、性能需求、数据需求、系统功能框图、系统总体数据流图及分模块数据流图、数据字典。 2. 总体设计阶段,包括系统总体功能模块图、功能模块描述、输入输出及统计查询等功能模块。 3. 概念设计阶段,包括系统各个模块的ER图及系统的总ER图。 4.逻辑结构设计阶段,包括系统各个模块的ER图所转化的关系模式。 关键词:数据库设计;管理系统; SQL server 2008;

目录 摘要...................................................... 1 绪论................................... 错误!未定义书签。1.1项目背景............................. 错误!未定义书签。1.1编写目的............................. 错误!未定义书签。1.1软件定义............................. 错误!未定义书签。 1.1开发环境............................. 错误!未定义书签。 2 系统需求分析 (2) 2.1信息与功能需求 (2) 2.2业务处理需求 (2) 2.3数据流图 (3) (3) (4) 2.4安全性与完整性要求 (8) 2.5数据字典 (8) 2.5.1储户基本信息表 (8)

{业务管理}IBM新一代银行核心业务系统

(业务管理)IBM新一代银行核心业务系统

新壹代银行核心业务系统 何京汉(IBM金融事业部银行资深方案经理) 背景 本文介绍新壹代核心银行所处的金融环境;结合目前国内银行所处的金融环境和银行客户的需求的新趋势,按照模型化银行(Modelingbank)的思想,介绍国内银行于设计新壹代银行核心系统是要考虑的主要问题。突出新壹代核心银行要解决的模型化银行的问题,国内系统和新壹代系统于观念上的差距,银行转型和信息规划设计的关系。国内从业人员普遍关心的金融产品概念(模型要点),核心银行的企业级客户文件(EnterpriseCIF)的原理。 国内外核心银行系统发展所处的环境 国外银行更换核心系统的努力 国外核心应用系统大多是70年代建成的,经过多年的运行后现状是:维护成本高,系统架构封闭,不易于加入新的功能且容易引起宕机。80年代至90年代国外银行,曾经试图更换这些系统,但大多归于失败,如花旗银行10亿美金的工程最终没有取得成功。 虽然,更换新的核心银行系统,难度极大,但银行仍于思考,为什么仍要将大量新的应用放于不灵活的且过时的系统上面?所以更换新的核心系统的努力仍于继续,只是吸取了80年代90年代的教训:银行必须采取新的策略去更新核心应用系统,以保证成功! 这些策略和市场趋势概括起来有: 用核心银行提供商的解决方案替换自我开发的核心银行系统。100强的银行70%的银行将去寻找"核心银行提供商的解决方案(Vendorbuiltsolutions)",即购买软件包。 主机方案的规模性得到验证。主机的核心银行方案,将继续流行。是因为它的规模性得到证实。尽管主机的技术没有新技术灵活,它的维护成本需要进壹步下降。 浏览器方式的解决方案(browser-basedsolutions)。市场上将会有更多的以浏览器方式出

银行储蓄管理系统需求分析设计

〖银行储蓄管理系统〗需求分析 2016年5月

目录 1 引言 (3) 1.1 编写目的 (3) 1.2 项目背景 (3) 1.3 定义 (3) 1.4 参考资料 (3) 2 任务概述 (3) 2.1 目标 (3) 2.2 运行环境 (3) 2.3 条件与限制 (3) 3 数据描述 (3) 3.1 静态数据 (3) 3.2 动态数据 (3) 3.3数据库描述 (3) 3.4数据词典 (5) 3.5数据采集 (6) 4 功能需求 (7) 4.1 功能划分 (7) 4.2 功能描述 (7) 5 性能要求 (8) 5.1 数据精确度 (8) 5.2 时间特性 (8) 5.3适应性 (8) 6 运行需求 (8) 6.1 用户界面 (8) 6.2 硬件接口 (8) 6.3 软件接口 (8) 6.4 故障处理 (8) 7 其他需求 (9)

1引言 1.1 编写目的 根据需求调研分析报告,定义系统功能和系统数据流图,通过编写需求分析规格说明书,让开发人员能够根据需求规格说明书来开发项目。 1.2 项目背景 软件名称:银行储蓄系统 委托单位:银行 开发单位:科技大学 主管:荀亚玲 1.3 定义 银行储蓄应用软件:基本元素为构成银行储蓄行为所必需的各种部分。 媒体素材:是指传播教学信息的基本才来单元,可分为五大类:文本类素材、图形(图像)类素材、音频类素材、动画类素材、视频类素材。 需求:用户解决问题或达到目标所需的条件或功能;系统或系统部件要满足合同、标准、规范或其它正式规定文档所需具有的条件或权能。 需求分析:包括提炼,分析和仔细审查已收集到的需求,以确保所有风险承担者都明其含义并找出其中的错误,遗憾或其他部族的地方。 1.4 参考资料 《软件工程导论——第5版》张海藩编著清华大学出版社 2任务概述 2.1 目标 完善目前银行储蓄系统,之智能跟上时代发展,同时通过实践来提高自己动手能力。 2.2 运行环境 操作系统:Windows XP/Windows Vista,支持环境:IIS 5.0 数据库:Microsoft SQL. Server 2000,编程环境:Microsoft visual basic 6.0中文版。 2.3 条件与限制硬件配置要求 硬什外部设备需奔腾133以上的pc机,内存需16兆以上 软件要求操作人员具有初步的相关知识 由于本系统为即时软件,刘数据蚓叫步要求较高,建议配置网络时使川叫靠性较高佝相关网络硬件设

资金管理系统详细方案

XX集团资金管理中心设立方案 (试行) 索引 一、设立主体 二、设立目标 三、管理模式及主要职能 四、机构及人员设置 五、参与集团资金统管的公司及纳入监管的银行账户 六、资金流转方案 七、网银权限设置 八、内部账户及账号设置 九、内部存贷款利率设置 十、会计核算科目设置 十一、业务操作内容、流程及会计核算办法 十二、现有银行贷款事项及内部往来的后续处理 十三、注意事项 十四、附件

根据XX集团管理现状及未来发展要求,设立集团资金管理中心。设立方案如下: 一、设立主体 资金管理中心设立在XX集团有限公司。 资金管理中心作为XX集团公司的一个职能部门(利润中心),其所有业务受到XX集团董事长、总经理及财务总监的安排与指导。其所有经济业务设立独立账套核算,同时其涉及到XX集团公司、各下属企业的业务也纳入XX集团有限公司账套、下属企业账套进行核算。并且各账套之间有对应关系。 办公地点设立在XX集团办公室。 二、设立目标 1、实施高度集中控制的资金管理体系,加强集团资金管理与控制 2、资金实现事前计划、实时控制与分析,加快资金周转,提高资金使用效益 3、降低集团财务风险 三、管理模式及主要职能 将银行机制引入企业内部,建立集财务管理、金融管理和企业管理三位一体的现代企业管理模式。身兼银行和财会两种职能,承担企业外部资金结算、资金内部调剂、对外融资等业务。资金管理中心实时掌握集团资金的流量、流向、存量,随时监控子公司的资金使用,同时可以灵活调配“沉淀”存量资金,提高资金利用效率。 1、账户分散、资金集中的管理模式 集团的资金管理采取账户分散、资金集中管理的模式。即各下属企业在外部商业银行的现有账户不变,保持现有的资金业务处理及会计核算流程不变;资金管理中心将各下属企业的外部银行账户加以记录,资金管理中心开立内部账户对应各下属企业的外部银行账户;同时将下属企业的闲散资金每日归集到资金管理中心,作为下属企业的“内部存款”,资金管理中心会计、出纳按照资金计划进行支付单据的审批、拨付;各下属企业依据集团的审批处理资金业

银行核心系统简介

核心业务系统 描述:银行核心业务系统主要功能模块包括:公用信息、凭证管理、现金出纳、柜员支持(机构管理和柜员管理)、总账会计、内部账管理、客户信息、活期存款、定期存款、外币兑换、同城票据交换、客户信贷额度管理、定期贷款、分期付款贷款、往来业务、资金清算、金融同业、结算、人行现代支付、外汇买卖业务、国债买卖、保管箱、租赁、股金管理、固定资产管理等。 一、核心系统背景 VisionBanking Suite Core是集团在总结二十余年银行应用系统集成经验的基础上,认真分析中国银行业未来面临的竞争形势,吸纳国外银行系统中先进的设计理念,推出的与国际完全接轨、功能完善、易学易用、扩充灵活、安全可靠的新一代银行核心业务系统。该系统覆盖了银行整个基础业务范围,有助于银行提供给客户更方便、快捷和贴身的“一站式”服务。 在VisionBanking Suite Core银行核心业务系统的开发中,集团将先进的系统设计思想、技术和国内、国际银行界先进的银行业务模式、管理方法结合在一起。系统采用先进的C-S-S三层体系结构,拥有强大、稳定的系统核心。 在全面覆盖传统银行业务的基础上,突出“金融产品”概念,银行可方便定制新的业务品种、产品组装或更改业务模式;系统整合了银行的业务服务渠道,方便银行增值服务范围的扩展,在无须更改系统内核的情况下方便实现与外部系统的互联互通。系统在深化“大集中” 、“大会计”、“一本帐”、“以客户为中心”、“综合柜员制”等成熟的设计思想的基础上,建立了从“客户”、“产品”到“服务” 、“渠道”的集约化经营管理模式,提供了真正的面向客户的服务模式,作到了为客户定制差别化的服务。从而实现了银行集中经营、规范业务、个性服务、丰富渠道、减少风险、辅助决策、降低成本的目标;系统设计严格遵守业务流程和会计核算分离原则,方便于系统快速部署和适应业务流程再造要求。 集团对核心业务系统的不断发展和完善就是以技术的进步来支持和推动银行业务的拓展,为银行的可持续性发展奠定了坚实的基础。 VisionBanking Core的系统实现原则满足了银行业务系统所要求的:先进性、实时性、可靠性、完整性、安全性、网络化、开放性、易扩展性、易维护性、易移植性。 二、系统功能说明

银行储蓄管理系统的设计与实现毕业论文

通信系统仿真实验课程设计 题目银行储蓄管理平台开发设计 学院 2010222111 专业班级通信104 学生姓名霍守斌 指导教师大彬 哥 2013年 6月 15日 摘要 近几年来,随着科技的发展和社会的进步,尤其是计算机大范围的普及,计算机应用逐渐由大规模科学计算的海量数据处理转向大规模的事务处理和对工作流的管理,这就产生了以台式计算机为核心,以数据库管理系统为开发环境的管理信息系统在大规模的事务处理和对工作流的管理等方面的应用,特别是在银行储蓄管理之中的应用日益引起人们的关注。本文基于Visual C++数据库编程技术,以可视化的集成开发环境Visual studio 2008为开发工具, Access 2007为后台数据库实现了一个小型的银行储蓄管理系统,该系统主要功能包括用户注册、销户、存款、取款、查询历史记录、用户修改信息等功能。从而满足了广大人民群众的需要同时也实现了银行储蓄管理的系统化、规范化、自动化和智能化,提高了银行管理的效率。 关键字:Visual C++;Access 2007;银行储蓄管理系统

Abstract In recent years, as technology development and social progress, in particular, the popularity of a wide range of computers, computer application gradually from large-scale scientific computing shift large-scale mass data processing and workflow transaction management, which resulted in of the desktop computer as the core database management system for the development of environmental management information system in large-scale transaction processing and management, workflow applications, especially in the management of bank savings into the application has attracted much attention. Based on the Visual C + + database programming techniques to visualize the integrated development environment, Visual studio 2008 as development tool, Access 2007 database for the background to achieve a small bank savings management system, which mainly features include user registration, cancel the account, deposit , withdrawals, query history, user modify the information and other functions. To meet the needs of the masses but also to achieve the systematic management of bank savings, standardization, automation and intelligence to improve the efficiency of bank management. Key word: visual c + +; Visual studio 2008; Access 2007; Bank savings management 目录 摘要 I Abstract II

银行储蓄系统

《数据库系统原理》 课程设计 2011年12月31日

目录 一、概述------------------------------------------------- 3 1.1 课程设计的目的---------------------------------------------- 3 1.2 课程设计的内容---------------------------------------------- 3 1.3 课程设计的要求---------------------------------------------- 3 二、需求分析--------------------------------------------- 3 2.1 系统需求---------------------------------------------------- 3 2.2 数据字典---------------------------------------------------- 3 三、系统总体设计----------------------------------------- 3 3.1系统总体设计思路--------------------------------------------- 3 3.2 概念模型设计----------------------------------------- 3 3.2.1 局部E-R图------------------------------------------------ 3 3.2.2 全局E-R图------------------------------------------------ 3 3.3 逻辑结构设计------------------------------------------------ 3 3.4 数据库建立实施--------------------------------------- 3 3.4.1 建立数据库------------------------------------------------ 3 3.4.2 建立关系表------------------------------------------------ 3 四、系统实现--------------------------------------------- 3 五、系统评价--------------------------------------------- 3 六、课程设计心得、总结----------------------------------- 3参考文献:----------------------------------------------- 3致谢--------------------------------------------------- 3附录--------------------------------------------------- 3

01银行储蓄管理系统可行性分析.docx

精心整理软 银行储蓄管理系统 可行性分析 目录

一、引言 1.1 编写目的 经过对该银行储蓄系统项目进行详细调查研究,初拟系统实现报告,对软件开发中将要面临的问题及其解决方案进行可行性分析。明确开发风险及其所带来的经济效益。本报告经审核后,交由软件经理审查。 1.2 背景 项目名称:银行计算机储蓄系统 用户:××银行 说明:现在的银行储蓄系统工作效率低,不能满足广大人民群众的要,人们希望能更方便更省时地办理储蓄业务。 在这样的背景下,切需要建立一个新的、高效的、方便的计算机储蓄系统。 1.3 参考资料 ·《软件工程导论(第五版)》张海藩编着清华大学出版社出版 ·《软件工程》任胜兵邢琳编着北京邮电大学出版社 二、可行性研究的前提 2.1 基本要求 2.1.1 功能要求 此系统所要完成的主要功能有两方面: 储户填写存款单或取款单交给业务员键入系统,如果是存款,系统记录存款人姓名、住址、存款类型、存款日期、利率等信息,完成后由系统打印存款单给储户。 如果是取款,业务员把取款金额输入系统并要求储户输入密码以确认身份,核对密码正确无误后系统计算利息并印出利息清单给储户 2.1.2 性能要求 为了满足储户的要求,系统必须要有高的运作速度,储户填写的表单输入到系统,系统必须能快速及时作出响应,迅速处理各项数据、信息,显示出所有必需信息并打印出各项清单,所以要求很高的信息量速度和大的主存容量; 由于要存贮大量的数据和信息,也要有足够大的磁盘容量;另外,银行计算机储蓄系统必须有可靠的安全措施,以保证储户的存储安全。

2.1.3 接口要求 业务员键入储户的资料要全部一直显示在屏幕上;储户键入密码到系统以核对;计算机与打印机有高速传输的连接接口,最后以纸张的形式打印出清单给储户。 2.1.4 输入要求 业务员从存取款表单输入数据,要迅速精确,适当调整输入时间,不能让客户等太久,但也不能让业务员太过忙碌以免影响正确率,造成用户损失。 2.1.5 输出要求 要求快速准确地打印出存款或取款清单给客户。 2.2 开发目标 近期目标: 第一年内在一个银行建立一个银行内部计算机储蓄系统,初步实现银行储蓄系统计算机化,并保证该银行能够按期望顺利完成工作。 长期目标: 希望在三至四年内,在国内银行中建立该计算机储蓄系统,促进银行间的互联合作,实现银行储蓄系统的计算机管理体制,提高银行储蓄系统的整体水平;并实现银行储蓄系统的高效性、方便性、实用性、互联性,给储蓄用户带来方便和益处,从而提高银行的信用度,提高银行公司的经济效益和社会效益。 2.3 限制条件 2.3.1 开发时间 ( 只限于近期目标 ) 预定为半年。 2.3.2 运行环境 Windowsxp 及以上操作系统、数据库:MicrosoftSQLServer2000。MicrosoftVisualBasic6.0中文版. 2.3.3 使用寿命 该系统至少使用四年以上。 2.3.4 进行可行性研究的方法 采用调查方法:通过对银行业务员和客户的调查以获得第一手资料,确定客户和实际应用中的需求;然后经过座谈

多银行资金管理系统

多银行资金管理系统标准化管理处编码[BBX968T-XBB8968-NNJ668-MM9N]

多银行资金管理系统 多银行资金管理系统(Multi-bank System,简称MBS),是中信银行在专业分工、合作共赢的全新商业理念的指导下,联手专业软件厂商,根据国内集团企业的实际资金管理情况而打造出的多银行资金管理系统,不但融合了银行金融服务和软件厂商技术服务优势,创造了一种专业、可持续的服务模式,更以一种开放的心态进行系统研发,使得MBS的全新合作模式不排他。 功能完善的多银行资金管理系统 中信银行MBS在研发过程中吸收了银行和软件厂商两方面的先进经验,不但能够实现与银行产品服务的快速对接,同时能够更多地体现企业在资金预算、结算和内部财务控制等方面的管理需求,既可以为集团企业提供传统的现金管理服务,还能作为全面的企业内部资金管理系统,为企业提供多银行账户管理、资金结算划拨、计划预算管控和资金流量分析四大业务平台。 通过多银行账户管理平台企业可以自主设定和维护需要管理的所有银行账户,并按照自身的组织架构来定义账户结构,并可以在总部层面实时查询和掌握所有成员机构在各银行的资金余额和交易状况,所有信息按层级分别显示,余额自动汇总,整体资金情况一目了然。 通过资金结算划拨平台企业能够对各银行账户进行收付结算处理,支持企业根据自身财务制度灵活设置各种资金交易的审批流程。资金交易可以通过手动或自动方式发起,系统及时反馈交易信息。如果与ERP相连,还可以联动记账,生成财务凭证。同时所有资金交易均支持单笔录入或批量导入,支付时可以受企业预算控制,并提供多种控制方式。此外,企业还可通过特殊对账码实现自动对账,并生成余额调节表,减少人工操作。 通过计划预算管控平台企业可以建立全面的资金计划管理体系,包括制定统一的资金计划政策和模版,资金计划审批、执行、调整和控制等。企业也可以根据实际收支情况,自动提交计划执行情况,实现资金计划考核和资金风险防范。

银行管理系统-项目开发计划书

软件工程课程设计 项目计划书 项目名称:银行管理系统 学院:计算机科学与技术学院 专业:计算机科学与技术专业 班级: 姓名: 指导教师:

2011 年11 月03 日

目录 1 系统主题................................................................................................................................. 错误!未定义书签。 引言............................................................................................................................................. 错误!未定义书签。 背景/选题动机/目的................................................................................................................... 错误!未定义书签。 系统与“创新杯”的主题关系(2)......................................................................................... 错误!未定义书签。 市场调查过程和结论(3) ............................................................................................................ 错误!未定义书签。 2 需求分析................................................................................................................................. 错误!未定义书签。 概要............................................................................................................................................. 错误!未定义书签。 使用场景..................................................................................................................................... 错误!未定义书签。 可行性分析报告......................................................................................................................... 错误!未定义书签。 应用领域/实用性分析............................................................................................................. 错误!未定义书签。 未来发展方向............................................................................................................................. 错误!未定义书签。 3 团队组成和分工..................................................................................................................... 错误!未定义书签。 4 系统功能概述......................................................................................................................... 错误!未定义书签。 功能需求分析............................................................................................................................. 错误!未定义书签。 系统性能要求 ................................................................................................................. 错误!未定义书签。 功能点列表................................................................................................................................. 错误!未定义书签。 性能点列表................................................................................................................................. 错误!未定义书签。 数据描述..................................................................................................................................... 错误!未定义书签。 5 系统设计概要......................................................................................................................... 错误!未定义书签。 实现系统所采用的技术方案和技术亮点 ................................................................................. 错误!未定义书签。 系统构架..................................................................................................................................... 错误!未定义书签。 功能模块描述............................................................................................................................. 错误!未定义书签。 E-R图 ........................................................................................................................................ 错误!未定义书签。 用例图......................................................................................................................................... 错误!未定义书签。 概念数据模型图......................................................................................................................... 错误!未定义书签。 业务模型..................................................................................................................................... 错误!未定义书签。 界面 ........................................................................................................................................... 错误!未定义书签。 6 系统环境................................................................................................................................. 错误!未定义书签。 开发平台..................................................................................................................................... 错误!未定义书签。 Client运行环境......................................................................................................................... 错误!未定义书签。

多银行资金管理系统

多银行资金管理系统编辑本段回目录 多银行资金管理系统(Multi-bankSystem,简称MBS),是中信银行在专业分工、合作共赢的全新商业理念的指导下,联手专业软件厂商,根据国内集团企业的实际资金管理情况而打造出的多银行资金管理系统,不但融合了银行金融服务和软件厂商技术服务优势,创造了一种专业、可持续的服务模式,更以一种开放的心态进行系统研发,使得MBS的全新合作模式不排他。 功能完善的多银行资金管理系统编辑本段回目录 中信银行MBS在研发过程中吸收了银行和软件厂商两方面的先进经验,不但能够实现与银行产品服务的快速对接,同时能够更多地体现企业在资金预算、结算和内部财务控制等方面的管理需求,既可以为集团企业提供传统的现金管理服务,还能作为全面的企业内部资金管理系统,为企业提供多银行账户管理、资金结算划拨、计划预算管控和资金流量分析四大业务平台。 通过多银行账户管理平台企业可以自主设定和维护需要管理的所有银行账户,并按照自身的组织架构来定义账户结构,并可以在总部层面实时查询和掌握所有成员机构在各银行的资金余额和交易状况,所有信息按层级分别显示,余额自动汇总,整体资金情况一目了然。 通过资金结算划拨平台企业能够对各银行账户进行收付结算处理,支持企业根据自身财务制度灵活设置各种资金交易的审批流程。资金交易可以通过手动或自动方式发起,系统及时反馈交易信息。如果与ERP相连,还可以联动记账,生成财务凭证。同时所有资金交易均支持单笔录入或批量导入,支付时可以受企业预算控制,并提供多种控制方式。此外,企业还可通过特殊对账码实现自动对账,并生成余额调节表,减少人工操作。 通过计划预算管控平台企业可以建立全面的资金计划管理体系,包括制定统一的资金计划政策和模版,资金计划审批、执行、调整和控制等。企业也可以根据实际收支情况,自动提交计划执行情况,实现资金计划考核和资金风险防范。 通过资金流量分析平台企业可以结合收支计划和当前资金存量计算下一计划周期的资金盈缺,为企业提供资金管理的考核及决策依据,同时将资金流量计划汇总到集团,对集团资金做出平衡试算,并能据此做出资金安排和投融资决策。 更加专业、可持续的全流程服务模式编辑本段回目录 中信银行MBS除了拥有完善的产品体系,更为关键的是引入了第三方软件厂商作为系统实施和售后服务支持的技术服务提供商,建立了一种更加专业、可持续的服务模式。

银行储蓄管理系统概要设计说明书样本

GB 8567- 银行储蓄管理系统 概要设计说明书 撰写人: 施靖豆健美雷明昊王新尧 审核人: 施靖 日期: -4-6

目录 1引言.................................... 错误!未定义书签。 1.1编写目的............................ 错误!未定义书签。 1.2背景................................ 错误!未定义书签。 1.3定义................................ 错误!未定义书签。 1.4参考资料............................ 错误!未定义书签。2总体设计................................ 错误!未定义书签。 2.1需求规定............................ 错误!未定义书签。 2.2运行环境............................ 错误!未定义书签。 2.3基本设计概念和处理流程.............. 错误!未定义书签。 2.4结构................................ 错误!未定义书签。 2.5功能需求与程序的关系................ 错误!未定义书签。 2.6人工处理过程........................ 错误!未定义书签。 2.7尚未问决的问题...................... 错误!未定义书签。3接口设计................................ 错误!未定义书签。 3.1用户接口............................ 错误!未定义书签。 3.2外部接口............................ 错误!未定义书签。 3.3内部接口............................ 错误!未定义书签。4运行设计................................ 错误!未定义书签。 4.1运行模块组合........................ 错误!未定义书签。 4.2运行控制............................ 错误!未定义书签。 4.3运行时间............................ 错误!未定义书签。

相关文档
最新文档