MJSU-34PL2中文资料
How to Order
The MJS jackscrew series provides a reliable interconnect for board-to-board,board-to-cable and in-line cable-to-cable applications. Layouts accommodating up to 76 MICROPIN/MICROSOCKET TM contacts are available, with the same
wide range of options as are offered with the other MICRO Line products offered in this catalog.
SERIES
INSULATOR MATERIAL CONTACT ARRANGEMENT
CONTACT TYPE TERMINATION TYPE TERMINATION CODES
SERIES
CONTACT TYPE TERMINATION CODE*MJS
26
P
H
001
*
-TERMINATION TYPE
INSULATOR MATERIAL B -Diallyl phthalate V -Polyester
U -Polyetherimide
R -Polyphenylene sulfide
MJS - Micro Center Jackscrew *See Termination Codes shown below.
P -Pin S -Socket
(H) 001 (H) 003(L) 1(L) 2-18" , 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon, yellow.
-18", 7/34 strand, #26 AWG,
MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I.
-1/2" uninsulated solid #25
AWG gold plated copper.
-1" uninsulated solid #25 AWG
gold plated copper.H -Insulated wire harness.
I -Integral tail (MJSV-28S only).L -Solid - uninsulated wire.
S -Solder pot to accept #26 AWG harness wire.
T -Thru bundle pigtail (MJSV-28P only).
Unshrounded Receptacle: 10, 26, 51, 66Shrouded Receptacle; 10, 26, 34, 38, 42, 76Low Profile Plug and Receptacle (shrouded): 28
CONTACT ARRANGEMENTS
RoHS COMPLIANCE R
Standard Wire Termination Codes
The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum.Harness Type (H)
#26 A WG per MIL-W-16878/4 T ype E T eflon ,7/34 stranded.
So li d U ninsulate d Type (L )
#25A WG gold plated solid copper.
L ength 3(76.2)6(152.4)8(203.2)10(254.0)12(304.8)18 (457.2)20(508.0)H 020H 019H 026H 029H 028H 001H 038H 027H 016H 034H 025H 002H 003H 023
24 (609.6)30(762.0)36 (914.4)48(1219.2)72(1828.8)120(3048.0)H 009H 010H 011H 013H 017H 042H 004H 005H 006H 048H 046H 041
L61L 56L 57L39L 58L 1
L 14L2L 7L6L 16L 10
.125(3.18).150(3.81).190(4.83).250(6.35).375(9.53).500 (12.70).750(19.05)1.000 (25.40)1.500 (38.10)2
.000 (50.80)2.500 (63.50)3.000 (76.20)
All Y ell o w C o l o r C od e d L ength Terminati o n
C od e
L ength
Terminati o n
C od e
L ength
All Y ell o w C o l o r C od e d
Contact Arrangements
Face view of pin-use reverse order for socket
Identification numbers are for reference only and do not appear on connectors. *Low profile configuration **MJSV & MJSR
112345
11315
1711
122234
611119
157
MJSV (shrouded)
MJSB/MJSU (unshrouded)
Unshrouded Receptacle (10-26-51-66)
MJSB/MJSU
Rear View
UNSHROUDED
STANDARD MATERIALS AND FINISHES
Micropin Microsocket Insulator Copper alloy, 50 miro-inch gold Copper alloy, 50 micro-inch gold
Stainless steel, passivated & lubricated Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Diallyl phthalate, green color
or polyetherimide, natural color
Jackscrew Retainer, Jackscrew Insert, Threaded Post, Polarizing .
.
Part Number
MJSB or MJSU-10P
MJSB or MJSU-10S
MJSB or MJSU-26S
MJSB or MJSU-51P
MJSB or MJSU-51S
MJSB or MJSU-66P
MJSB or MJSU-66S
.378 (9.60)
.378 (9.60)
.778 (19.76)
.778 (19.76)
1.028 (26.11)
1.028 (26.11)
1.280 (3
2.51)
.190 (4.83)
.190 (4.83)
.190 (4.83)
.190 (4.83)
.260 (6.60)
.260 (6.60)
.260 (6.60)
.290 (7.37)
.290 (7.37)
.690 (17.53)
.690 (17.53)
.940 (23.88)
.940 (23.88)
1.190 (30.23)
A
Max.
B
Max.
C
Bsc.
1-64 UNC-2A
THREAD
MAX.
.110 MAX.
(2.79)
1-64 UNC-2B
THREAD
POLARIZING PIN (OPTIONAL WITH LOSS OF CONTACT)
Receptacle Plug
Shrouded Receptacle (16-28*-34)
MJSV/MJSR
.090 ± .010
(2.29 ± 0.25)
Receptacle
Plug
SHROUDED
STANDARD MATERIALS AND FINISHES
Micropin
Microsocket
Insulator
Copper alloy, 50 miro-inch gold
Copper alloy, 50 micro-inch gold
Part Number
MJSV or MJSR-16P
MJSV or MJSR-16S
MJSV-28P* or MJSR-28P*
MJSV-28S* or MJSR-28S*
MJSV-34P or MJSR-34P
MJSV-34S or MJSR-34S
.700 (17.78)
.700 (17.78)
1.020 (25.91)
1.020 (25.91)
1.180 (29.97)
1.180 (29.97)
*Low profile configuration, for "L" (uninsulated solid wire) termination add .090 (2.29) to the "B" dimension.
For "H" (insulated wire) termination add .200 (5.08) to the "B" dimension. For special configurations
with backpotted standoffs consult factory.
.345 (8.76)
.320 (8.13)
.232 (5.89)
.246 (6.25)
.330 (8.38)
.305 (7.75)
.545 (13.84)
.545 (13.84)
.865 (21.97)
.865 (21.97)
1.025 (26.04)
1.025 (26.04)
.175 (4.45)
-
.062 (1.57)
-
.160 (4.06)
-
A
Max.
B
Max.
C
Ref.
D
±.006 (0.15)
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Stainless steel, passivated
Polyester, black color
Polyphenylene sulfide, black color
Jackscrew
Retainer, Jackscrew
Insert, Threaded
Post, Polarizing
Shrouded Receptacle (42)
MJSR-42P
#1.035 (0.89)
1/16 SOCKET #1MJSR-42S
Part Number A Max.
B Max.
C Ref.
D
±.006 (0.15)MJSR-42P MJSR-42S
1.445 (36.70)1.445 (36.70).345 (8.76).357 (9.07) 1.250 (31.75)1.250 (31.75).142 (3.61)
-
STANDARD MATERIALS AND FINISHES Micropin Microsocket Insulator Jackscrew Retainer, Jackscrew Insert, Threaded
Copper alloy, 50 miro-inch gold Copper alloy, 50 micro-inch gold Polyphenylene sulfide, black color Stainless steel, passivated Stainless steel, passivated
Stainless steel, passivated
Shrouded Receptacle (76)
MJSR-76P
CAV. #1
MJSR-76S
Part Number A Max.
B Max.
C Ref.
D
±.006 (0.15)MJSR-76P MJSR-76S
1.595 (40.51)1.595 (40.51).345 (8.76).357 (9.07) 1.400 (35.56)1.400 (35.56).142 (3.61)
-
STANDARD MATERIALS AND FINISHES
Micropin Microsocket Insulator Jackscrew Retainer, Jackscrew Insert, Threaded
Copper alloy, 50 miro-inch gold Copper alloy, 50 micro-inch gold Polyphenylene sulfide, black color Stainless steel, passivated Stainless steel, passivated
Stainless steel, passivated
Plug (Molded-In Insert - Special)
MJSV**P
MJSV-26P**(Shown)
P art Number MJSV-26P**MJSV-38P**
.868 (22.05)1.168 (29.67)
A R e f.
INSULATOR
MICRO-PIN CONTACT
Receptacle (Special)
MJSV-26S**(Shown)
Part Number MJSV-26S**
MJSV-38S**
.943 (23.95)1.243 (31.57)
.874 (22.20)1.174 (29.82)
A Ma x.
B R e f.MJSV**S*
Contact Arrangements
.075 (1.91)
Identification numbers are for reference and do not appear on connectors.26 Contacts
.075 (1.91)
38 Contacts