英文技术服务合同范本【新版】
英文技术服务合同范本
Contract No.:________________________.
Date of Signature:____________________.
Place of Signature:____________________.
This Contract is made and entered into through friendly negotiation by and between China____________________ (hereinafter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions:
Article 1 Contents of Technical Consultancy Service
1.1 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services.
1.2 The Scope of Technical Services is defined in Appendix 1.
1.3 The Time Schedule for the Services is shown in Appendix
2.
1.4 The Manning Schedule is described in Appendix 3.
1.5 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents,
all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
Article 2 Both Parties' Responsibility and Liability
2.1 Client shall furnish to Consultant the pertinent data, technical service reports, maps and information available to him and shall give to Consultant the reasonable assistance necessary for carrying out of his duties. Particularly Client shall nominate a general representative who shall be available at reasonable time.
2.2 Client shall assist Consultant with the responsible authorities for obtaining visas, work permits and other documents required by Consultant to enter the country and to have access to the Site of the Project. The above expenses shall be borne by Consultant.
2.3 Consultant shall furnish a sufficient number of competent personnel to perform its obligation hereunder, in addition to those personnel specifically listed in Appendix
3. All personnel employed by Consultant in carrying out the work shall be exclusively Consultant's responsibility, and Consultant shall hold Client harmless from any claims of any kind by Consultant's personnel
arising out of any acts by Consultant or its personnel in connection with the work performed hereunder.
2.4 Consultant shall provide Client all the technical technical service reports and relevant documentation within the Scope of Technical Services and within the Time Schedule of the Time Schedule for the Services.
2.5 Consultant shall assist Client＇S personnel in his country in obtaining visas and in arranging lodgings. Hotel and boarding expenses shall be borne by Client. Consultant shall supply to
Client＇S personnel office space and necessary facilities as well as transportation.
2.6 Consultant shall be responsible for and shall indemnify
Client and his employee in respect of injury to person or damage to property occurring in connection with the services, to the extent
that such damage or injury directly results from negligence of Consultant's personnel while engaged in activities under this Contract.Consultant shall be liable only to the work under this Contract.
2.7 Any and all liability of Consultant with respect to this Contract shall be limited to the Total Contract Price received by Consultant for his profession services and shall terminate upon expiration of the warranty period set forth in Article 7.
3.
Article 3 Price and Payment
3.1 The total contract price is__________(say
__________________only) in________(currency). The breakdown prices of the above mentioned total contract price are as follows:
Contract Price for Item 1: ______(say ____________only)
in________ (currency); Contract Price for Item 2: ______(say
____________only) in________ (currency); Contract Price for Item 3: ______(say ____________only) in________ (currency); Contract Price
for Item 4: ______(say ____________only) in________ (currency).
3.2 The total contract price will include all the service and technology provided by Consultant. The total contract price shall be firm and fixed and shall not fluctuate with any inflation. The total contract price shall include all charges and expenses incurred by Consultant in performing his obligations both in his own country and in the People's Republic of China and includes the expenses incurred
in sending the Technical Documentation to Client's office by all kinds of forms.
In the event of Force Majeure as defined in the Contract, the total contract price shall be readjusted through friendly negotiations between the parties. If Client requires services not contemplated in the Scope of Services the parties shall friendly discuss an amendment to the
total contract price. Any such amendment shall be in writing countersigned by both parties. This document shall then form integral part of the Contract.
3.3 All payments to be made by Client to Consultant under the present Contract shall be made by telegraphic transfer. In case of any payment by Client, the payment shall be effected
through__________in China to _________ for the account of Consultant.
In consideration for the services provided by Consultant hereunder, Client shall effect the payment to Consultant in accordance with the following manner and percentage:
3.3.1 _______ percent (________ %) of the total contract price,
i.e._____________ (Say: ________ only), shall be paid by Client to Consultant within ________ (____) days after the client has received the following documents provided by Consultant and found them in order.
A. One (1) original and two (2) duplicate copies of Consultant's government approval, or a written statement of the competent authorities or relevant agency of Consultant's country certifying
that such document is not required;
B. One (1) original and one (1) duplicate copy of Irrevocable Letter of Guarantee for advance payment issued by Consultant's Bank
in favor of Client covering_______(Say:________ only), specimen of which is as per Appendix 4;
C. Five (5) copies of profoma invoice covering the total contract price;
D. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
E. Two (2) copies of sight draft.
The said shall be delivered by Consultant not later than ____days after the effective date of the ________present Contract.
3.3.2 ________percent (____%) of the Contract price for Item 1,
i.e._________ (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Consultant has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 1;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
3.3.3 ________ percent (____%) of the Contract price for Item 2,
i.e. ___________ (Say: ____________ only) shall be paid by Client to Consultant within ________ (___) days after Licensee has received the following documents provided by Consultant and found themin order.
A. Ten (10) copies of technical service report on Item 1;
indicating the amount to be paid;
C. Two (2) copies of sight draft.
3.3.4 ________percent (____%) of the Contract price for Item 3,
i.e._________ (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Consultant has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 1;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
3.3.5 ________percent (____%) of the Contract price for Item 4,
i.e._________ (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Consultant has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 1;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
3.3.6 ________percent (____%) of the Total Contract price ,
i.e._________ (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Consultant has received the following documents provided by Consultant and found them in order.
indicating the amount to be paid;
B. Two (2) copies of sight draft.
3.4 In case Consultant is liable for paying to Client the penalty under the Contract, Client shall have the right to deduct it from any said payment.
3.5 The banking charges of both parties incurred in China for the execution of the Contract shall be borne by Client and those incurred outside China shall be borne by Consultant.
Article 4 Delivery Schedule
4.1 The deadline for the arrival of the Technical service reports CIF _____ are:
A. Technical service report on Item 1 : _________months after effectiveness of the Contract;
B. Technical service report on Item 2 : _________months after effectiveness of the Contract;
C. Technical service report on Item 3 : _________months after effectiveness of the Contract;
D. Technical service report on Item 4 : ________months after effectiveness of the Contract.
4.2 Consultant will inform Client by Fax when the Technical service reports are airmailed to Client indicating the date and number of airway bill. Client will inform Consultant when the Technical service reports have been received.
4.3 Should any document be missing or damaged during the
transport Consultant shall be notified accordingly and within two (2) weeks the missing or damaged document shall be replaced by Consultant free of charge.
Article 5 Confidentiality
5.1 All data assembled, developed, compiled, reproduced, studied, and prepared in connection with the work done hereunder and furnished to Consultant by Client shall be considered confidential and shall not be divulged to any person, firm or corporation other than Client or its designated representatives. This Clause shall remain binding on Consultant notwithstanding the termination of the Contract for any reason.
5.2 Within the validity period of Contract, Both parties shall take proper measures to keep the materials or information strictly confidential. The other party shall not disclose or divulge to any third party without prior written consent of one party.
5.3 Either party shall be obliged to keep confidential any secret information of the other party which either party and its personnel may obtain or be accessible to in the course of the performance of Contract. Either party shall not make use of or disclose such secret information obtained from the other party without prior written permission issued by the other party.
Article 6 Taxes and Duties
6.1 All taxes and duties in connection with and in the execution of Contract levied by the Chinese government on Client in accordance with the tax laws of PRC shall be borne by Client.
6.2 All taxes and duties levied by the Chinese government on Consultant, in connection with and in the execution of Contract, according to Chinese tax laws and the agreement between the government of PRC and the government of Consultant's country for the reciprocal avoidance of double taxation and the prevention of fiscal evasion with respect to taxes on income shall be borne by Consultant.
Client is legally obliged to withhold, as a withholding agent, the amount of taxes pro rata each taxable payment under Contract and pay them to the relevant Chinese tax authorities. After receiving the tax receipts issued by the relevant Chinese tax authorities for the aforesaid withholding taxes, Client shall forward them to Consultant without undue delay.
6.3 All taxes and duties arising outside PRC in connection with and in the execution of Contract shall be borne by Consultant.
Article 7 Warranty
7.1 Consultant warrants that he has the experience and capability to efficiently and expeditiously perform the services in a satisfactory manner and that the services performed by him under this Contract shall be performed by competent personnel in accordance with accepted standards.
7.2 In the event of a failure of Consultant to provide to Client satisfactory services within the scope of work described in Appendix at any time for any reason within the control of the Consultant, Client may notify Consultant of such dissatisfaction. Consultant
shall be afforded a period of days to correct or remedy the matter. Should Consultant within the time afforded by Client fail to correct or remedy the matter to the satisfaction of Client, all charges shall
cease forthwith until such time as Consultant is able to provide satisfactory services in accordance with the Scope of work described in Appendix.
7.3 Consultant guarantees to Client that he shall, after receipt of notice from Client, promptly correct at no cost any errors in the services arising out of the negligent performance thereof.
Article 8 Ownership of Technical Service Reports
8.1 Final version of the technical service report submitted to Client and all relevant data such as maps, plans and supporting material compiled in performing the Scope of Services, shall be the property of Client. Such materials shall be sorted and indexed by Consultant prior to transmission to Client.
8.2 Consultant shall be permitted to retain copies thereof, provided however that such materials, including the material furnished by Client as stated in Article 5 of this Contract, shall not be used by Consultant for purposes not related with this Project without the prior written approval of Client.
Article 9 Assignment
9.1 Neither Client nor Consultant shall assign or sublet their rights or obligations hereunder without the prior written consent of the other party.
Article 10 Termination
10.1 If, due to the responsibility of Consultant, the technical service reports have not been delivered at dates according to the delivery schedules as stipulated in Article 4 of the Contract,
Consultant shall be obliged to pay to Client penalty for such delay in delivery at the following rates:
A. ______ percent (____%) of the total contract price per week
for the first four weeks;
B. _____ percent (____%) of the total contract price per week from the fifth week to the eighth week;
C. ______ percent (____%) of the total contract price per week from the ninth week of delay.
Odd days less than one (1) week shall be counted as one (1) week for calculating the liquidated damage.
10.2 The total liquidated damage for late delivery shall not exceed ______ percent (____%) of the total contract price. Payment of the liquidated damage for late delivery shall not release
Consultant from its obligation to deliver technical service reports.
10.3 Client may, without prejudice to any other remedy for Consultant's following breach of Contract, terminate Contract in whole or in part by a written notice of default send to Consultant, if Consultant
A. Fails to deliver any or all of technical service reports
within______(____) days after the scheduled delivery date as
specified in Article 1; or
B. Fails to make the technical service reports meet the minimum level of Acceptance Standards as specified in Appendix 1.
Consultant shall refund to Client all the payments effected by Client to Consultant plus an interest at the rate of______ percent (____%) per annum in case of such a termination.
10.4 Either party may, without prejudice to any other remedy, terminate Contract in whole or in part by a written notice send to
the other party, if the other party.
A. fails to perform its confidentiality obligation under Contract; or
B. fails to perform any other obligations under Contract except minor parts thereof, and does not remedy for its failure within a period of______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
C. becomes bankrupt or insolvent; or
D.Affected by any event of Force Majeure for more than ______ days.
Article 11 Force Majeure
11.1 Should either party be prevented from performing any of its obligations under Contract due to event of Force Majeure, such as war, serious fire, typhoon, earthquake, flood and any other events which could not be expected, avoided and overcome, the affected party shall notify the other party of its occurrence by fax and send by
registered airmail a certificate issued by the competent authorities or agency within fourteen (14) days following its occurrence.
11.2 The affected party shall not be liable for any delay or failure in performing any or all of its obligations due to the event
of Force Majeure. However, the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure without delay.
11.3 Both parties shall proceed with their obligations immediately after the cease of the event of Force Majeure or removal of the effects. The validity period of Contract and/or the scheduled period for relative execution of Contract shall be extended correspondingly.
Article 12 Arbitration
12.1 Any dispute arising from or in connection with this Contract shall be submitted to China International Economic and Trade Arbitration Commission，Shenzhen Commission for arbitration in accordance with the Commission's arbitration rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties and the applicable law is the material law of P.R.C.
12.2 Notwithstanding any reference to arbitration, both Parties shall continue to perform their respective obligations under the Contract unless otherwise agreed.
Article 13 Language and Standards
13.1 Correspondance except this Contract between Client and Consultant, data and documents made available by Client to Consultant and the technical service reports and drawings prepared by Consultant shall be in the English language.
13.2 Measures shall be written in the metric system.
Article 14 Governing Law
14.1 The construction, validity and performance of this Contract shall be governed by the laws of the People's Republic of China.
Chapter 15 Effectiveness of the Contract and Miscellaneous
15.1 Both parties shall make effort to obtain the approval from the respective authorities, if necessary, within thirty (30) days after Contract is signed by the authorized representatives of the two parties. Either Party shall notify in writing the other party of the approval date. The later date of approval shall be taken as the Date of Effectiveness of Contract.
15.2 Contract shall be valid and remain in force for_______(____) years from the Date of Effectiveness.
15.3 The outstanding credit and debt between the parties under Contract shall not be affected upon the termination or expiration of Contract.
15.4 Appendices hereof shall be integral parts of Contract and have the same legal force as the text of Contract itself. The text of Contract shall prevail in case of any discrepancies between the text of Contract and Appendices.
15.5 All amendments, supplements, subtractions, or alterations to Contract shall be made in writ
经销商授权协议合同书(中英文对照)
授权经销商协议 （中英文对照） 编 辑 前 可 删 除 此 页 合同特点：简单明了条款轮廓清晰（花费了太多时间） 收取一点点费用请不要介意
授权经销商协议 Authorized Dealer Agreement 甲方：Party A: 乙方：Party B: 甲、乙双方经友好协商，本着平等、自愿、诚实、互惠互利的原则，就合作事宜达成如下协议： Through friendly negotiations, based on the principle of equality, voluntary, honest and mutual benefit, Party A and Party B made and entered into the following agreement on: 1.委任 Appointment 甲方授权乙方作为甲方产品中国地区的唯一授权经销商。 Party A authorizes Party B as the only authorized dealers of Part A’s product in China. 所涉及的： Involves: 2.有效期 Validity 本协议自双方签字盖章之日起生效，有效期至年月 日止。 This Agreement shall become effective as of the date of signature and seal by both parties. Valid until . 当本协议期满，如双方同意续约，应在本协议有效期满前_______个工作日内签署书面续约协议。 Upon the expiration of this contract, if both parties agree to renewing, shall sign a written renew contract within working days prior to the expiry of this agreement. 3.甲方责任和义务 Party A responsibilities and obligations 基于本协议授予的独家代理权，甲方不得直接或间接地通过乙方以外的渠道向代理区域顾客销售或出口甲方产品第一条所列商品或服务。
【实用】英文技术服务合同范本
英文技术服务合同范本 Contract No.:________________________. Date of Signature:____________________. Place of Signature:____________________. This Contract is made and entered into through friendly negotiation by and between China____________________ (hereinafter referred to as “Client”), as one party, and____________________ (hereinafter referred to as“Consultant”),as the other party, concerning the technical consultancy service of__________, under the following terms and conditions: Article 1 Contents of Technical Consultancy Service 1.1 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 The Scope of Technical Services is defined in Appendix 1. 1.3 The Time Schedule for the Services is shown in Appendix 2. 1.4 The Manning Schedule is described in Appendix 3. 1.5 Consultant shall complete the Services within__________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within____months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
国际合作框架协议范本(规范版)
国际合作框架协议范本(规范版) Model international cooperation framework agreement (norm ative version) 甲方：___________________________ 乙方：___________________________ 签订日期：____ 年 ____ 月 ____ 日 合同编号：XX-2020-01
国际合作框架协议范本(规范版) 前言：本文档根据题材书写内容要求展开，具有实践指导意义，适用于组织或个人。便于学习和使用，本文档下载后内容可按需编辑修改及打印。 甲方： 代表： 地址： 电话： 传真： 乙方： 代表： 地址： 电话： 传真： 甲乙双方本着互利互惠、共同发展的原则，经过友好协商，决定充分利用双方各自的优势，资源互补，开展留学预备课程，特制定本合作框架协议。
一、合作内容 甲乙双方共同开发设计并开办留学预备课程，共同确定培养目标，制定教学计划，安排课程设置。 1、预备班学制：______年。 2、预备班培养目标： （1）提高学生的英语综合能力，并达到可以办理出国留学的英文水平。 （2）加强学生专业知识水平，为学生在国外的专业学习奠定基础。 （3）达到与国外交流学校课程衔接模式的实现。 3、预备班结束后前往国外学习的国家：澳大利亚、英国、新西兰、加拿大等。 4、预备班收费标准：______元人民币（不含国外使馆签证申请费、个人出国材料公证费以及国外学校报名费）。 二、双方权利和义务 1、甲方权利和义务 （1）负责招生工作，包括制定招生计划，招生宣传等。
（2）负责设计教学方案。 （3）负责安排教学相关工作，包括教师招聘、教学场地的安排和教材的选择等。 （4）负责向学生收取学费和签证服务费。 （5）负责学生管理。 （6）承担所有教学成本及教职员工的薪金。 （7）负责组织安排家长和学生就签证文件的准备、出国前签证辅导、及临行辅导等之会议。 2、乙方权利和义务 （1）负责与海外合作院校联络和沟通，并负责接待与招待外方人员。 （2）负责甲方工作人员的业务培训。 （3）辅助甲方设计教学方案，给教学计划及方案提出建议和意见。 （4）帮助甲方聘请外籍教师、英文教师。 （5）帮助学生联络国外合作院校并取得录取信。
中英文进出口代理协议
和 *****************************CO., LTD. **********公司 AND 之 IMPORT AGENT SERVICE AGREEMENT 委托代理进口协议 2009/1/8 进口代理协议书
IMPORT SERVICE AGREEMENT 甲方： 乙方：***公司 *******Co.,Ltd 甲、乙双方本着平等互利、共同发展的原则，经友好协商，自愿签定本协议： After friendly negotiations between the Parties and according to the “Tentative Provisions on System of Foreign Trade Agency” promulgated by the former PRC Ministry of Economic and Trade, Party A and Party B have reached the following agreement: 一、甲方全权委托乙方代理进口产品及报关，承担乙方按照其指示或经其同意而进行操作的一切后果。Party A hereby appoints Party B as Party A's import agent to provide import agent services . 二、甲方应在实际进口之前将进口详细计划告之乙方，并提供产品的品名、数量、重量、价格、产地、贸易国及HS编码，以便乙方及时开始准备工作。甲方应保证上述资料完整准确，并做到单货相符、单单相符、单证相符。若因甲方提供信息有误或延迟而造成额外费用，甲方应承担全部责任。 Party A shall provide to Party B such detailed documents as the bill of lading and list of Goods to be imported indicating the prices, quantity, specifications, purposes and additional documents as requested by the competent authorities on a case by case basis. Party A shall immediately after arrival of the Goods at the port provide the relevant documents to Party B. Party A shall instruct the exporter and ensure that the exporter issues a proper and complete set of customs clearance documents such as commercial invoices, packing lists, bills of lading (or airway bills, etc. to the effect that all documents are consistent with each other and that all documents are consistent with the conditions of the Goods. The customs clearance shall be made according to the facts. If it is found that the documents are not consistent with the Goods, Party A shall bear the relevant liabilities. 三、甲方应积极配合乙方做好通关手续（随时提供海关所需资料），并提供必要协助。 Party A shall be present at the inspection site designated by the customs authorities. 四、甲方应在每票操作结束后付给乙方进口代理费，代理费按进口合同金额的***%收取，若不足人民币***元，则按人民币***元收取。 The Parties herewith agree that for the provision of the aforementioned Import Agent Services Party A shall pay Party B an import agency fee (“Agency Fees”) for each import of Goods. The Agency Fee for each import shall be calculated as zero point five percent (0.8%) of the CIF price of the Goods to be imported. If the Agency Fee for a transaction is less than Renminbi five hundred (RMB 800), it shall be set as Renminbi five hundred (RMB800)… 五、在通关过程中发生的其他费用，如仓费、法定商检费、查验费、保险费、运杂费等（以海关、商检、船务、运输公司开据的发票为准），由乙方按实际发生数与甲方结算。 Miscellaneous Expenses incurred in the course of handling customs clearance for the imported Goods, including but not limited to fees and expenses for commodity inspection, health quarantine, quarantine for animals and plants, transportation and incidental expenses, fees and expenses incurred in the port area, the port supervision authority, insurance fees and banks charges (“Miscellaneous Fees”) shall be borne by Party A, excepted such Miscellaneous Expenses miscellaneous expenses incur as a
2020版注册监理工程师 合同管理 第九章第四节 AIA系列合同及CM和IPD合同模式
第四节 AIA系列合同及CM和IPD合同模式 一、CM模式 （1）AIA合同 1）A系列：业主与施工承包商、CM承包商、供应商，以及总承包商与分包商之间的标准合同文件 2）B系列：业主与建筑师之间的标准合同文件 3）C系列：建筑师与专业咨询人员之间的标准合同文件 4）D系列：建筑师行业内部使用的文件 5）E系列：合同和办公管理中使用的文件 6）F系列：财务管理报表 （2）CM合同的内涵 1）指由业主委托一家CM单位承担项目管理工作，该CM单位以承包单位的身份进行施工管理，并在一定程度上影响工程设计活动，组织快速路径（Fast-track）的生产方式，使工程项目实现有条件的边设计边施工2）CM模式尤其适用于实施周期长、工期要求紧的大型复杂工程 3）与传统总分包模式下施工总承包商对分包合同的管理理不同，CM合同属于管理承包合同 （4）风险型CM施工阶段的工作 （5）风险型CM的合同计价方式（成本加酬金） 1）采用成本加酬金的计价方式，成本部分由业主承担，CM承包商获取约定的酬金 2）CM承包商签订的每一个分包合同均对业主公开，CM承包商不赚取总包与分包合同之间的差价 3）酬金约定通常可选用如下方式： 1.固定酬金 2.按分包合同价的百分比取费 3.按分包合同实际发生工程费用的百分比取费 （6）保证工程最大费用值（GMP）
（7）可以与雇主协商调整GMP的情况（甲方原因） 1）发生设计变更或补充图纸 2）业主要求变更材料、设备的标准、系统、种类、数量和质量 3）业主签约交由CM承包商管理的施工承包商或雇主指定分包商与CM承包商签约的合同价大于GMP中的相应金额等情况 二、IPD模式 1）概念阶段 2）标准设计阶段 3）详细设计阶段 4）执行文件阶段 5）机构审查阶段 6）采购分包阶段 7）施工阶段 8）竣工收尾阶段 （3）报酬激励方面 1）参与各方共同商定项目目标实现的报酬金额 2）若实际成本小于目标成本，则业主应将结余资金按合同约定的比例支付给其他参与方作为激励报酬 3）若项目实际成本超出目标成本，根据合同约定，业主可选择偿付工程的所有成本，包括设计单位和承包商人员的工资，也可选择不再偿付任何单位的人员成本，只支付材料、设备和分包成本 （4）索赔与争端处理 1）在索赔方面，参与各方应放弃任何对其他参与方的索赔（故意违约等情形除外） 2）在争端处理方面，该模式下任何一方提出的争议应提交到由业主、设计单位、承包商等参与方的高层代表和项目中立人所组成的争议处理委员会协商解决，项目中立人由参与各方共同指定
经销商授权协议中-英文版
授权经销商协议 Authorized Dealer Agreement 根据平等互利，双方作出分为以下协议签订，双方应开展业务按照下列条款和条件的签名。 Based on the equality and mutual benefit, both parties made and entered into the following agreement on, both parties should carry out business according to the following terms and conditions upon signature. 1.有关缔约方 The Parties Concerned 甲方： Party A: 地址： Add: 电话： Tel: 传真： Fax: 电子邮箱： E-mail: 乙方： Party B: 地址：
Add: 电话： Tel: 传真： Fax: 电子邮箱： E-mail: 1.定义 Definitions 当本协议中使用的下列术语应具有各自的含义表示，这种意义是适用于这两种定义方面的单数和复数形式： When used in this Agreement, the following terms shall have the respective meanings indicated, such meanings to be applicable to both the singular and plural forms of the terms defined: ?“协议”指本协议附表所附的任何文件，包括参照，因为每个可能不时按 照当本协议的条款作出修订; ?“Agreement” means this agreement, the Schedules attached hereto and any documents included by reference, as each may be amended from time to time in accordance with the terms of this Agreement; ?“配件/附件”是指图标A所述附上的配件，并包括A部分所制造并用于连接货物运作的特殊装置。附件可能被从图表A中被删掉也可能加进去，公司单方面可随时自行更改他们的规格和设计，要向乙方邮寄书面通知。 每个更改，在书面通知发送给分销商的15天后生效。 -“Accessories” means the accessories described in Exhibit A attached hereto, and includes any special devices manufactured by Part A and used in connection with the operation of the Goods. Accessories may be deleted from or added to Exhibit A and their specifications and design may be changed by Company at its sole discretion at any time by mailing written notice of such changes to Part B. Each change shall become effective 15 days following the date notice thereof is sent to Distributor.
战略合作协议书范本通用版
编号：YB-HT-021964 战略合作协议书范本通用版 The agreement stipulates mutual obligations and rights that must be performed 甲方： 乙方： 签订日期：年月日 精品合同 / Word文档 / 文字可改 编订：Yunbo Design
战略合作协议书范本通用版 甲方：______人民政府 乙方：______大学 在已经来临的知识经济时代，70%以上的信息和科学创新成果均是以英语为载体进行传播的，并且随着互联网技术的发展和中国加入世界贸易组织，英语在人们生活、学习、工作中交流频率也将会越来越高。 为此，______人民政府决定以政府行为强化中小学英语教学，实施英语教育工程，通过培训英语师资、聘请外籍教师和优秀大学生参与中小学英语教学活动等方式，提高______中小学生的英语听说能力，全面促进中小学生英语学科素质的发展，使英语课程成为全区性的优势学科，为建设“文化发达，经济繁荣，服务一流，现代文明”的______注入新的活力，为教育基础厚实的______
增加新的现代文化积淀。 为了实现以上目标，甲方(______人民政府)和乙方(______大学)经过充分酝酿和协商，达成如下协议： 一、甲方为了落实《中共______市______委、______市______人民政府关于加速发展教育事业的决定》《______市______人民政府教育事业发展“十五”计划》中关于“把英语学科建设成为我区的优势学科”的战略目标，诚恳邀请乙方给予甲方全区英语教学、科研、师资培训、聘请外籍教师等方面以多方面的指导和支持。 二、作为广东省属涉外型重点大学的乙方本着服务地方的宗旨，积极响应省委领导加强广东省英语教学工作的指示精神，接受甲方的邀请，并积极发挥乙方外语教学、培训、科研和师资等方面的优势，给予甲方以力所能及的支持。 三、乙方对甲方的支持，主要包括：对______中小学英语教学改革、教学研究提供指导和咨询;分期分批培训______英语教师的口语和听力，建立水平测评系统;创造条件开设委托培养性质的
独家代理协议模板 中英文对照版
编号：_____________ 独家代理协议 卖方：___________________________ 代理商：___________________________ 签订日期：_______年______月______日
本协议于20XX年月日，由有限公司（一家根据中国法律组建并存在的公司，其主营业地在，以下简称卖方）与XXX公司（一家根据南非法律组建并存在的公司，其主营地在南非，以下简称代理商）共同签定并一致约定如下： This agreement is made and entered into on 20XX- by and between Plastic Industry Co.， Ltd. a corporation duly organized and existing under the the laws of People's Republic of China， with its principal place of business at (hereinafter called seller) and XXX a corporation duly organized and existing under the laws of South Africa， with its principal of business at South Africa (hereinafter called agent) ， Whereby it's mutually agreed as follows: 第一条委任与接受 在本协议有效期内，卖方指定代理商为本协议第四条项下商品的独家代理商，在第三条规定的区域内招揽订单。代理商同意并接受上述委任。 Article 1 Appointment and Acceptance During the effective period of this agreement， seller hereby appoints agent as its exclusive agent to solicit orders for products stipulated in Article 4 from customers in the territory stipulated in Article 3 and agent accepts and assumes such appointment. 第二条代理商的义务 代理商应严格遵守卖方随时给予的任何指令，而且不得代表卖方作出任何担保、
ICE合同的全称
ICE合同的全称 JCT合同范本情况简介 JCT合同范本情况简介 1. 国际知名工程合同范本 现在国际上具有影响力的合同示范文本主要包括:国际咨询工程师联合会制定的FIDIC系列合同、美国建筑师学会的AIA系列合同文件、英国土木工程师协会的ICE施工合同条件及NEC施工合同条件、英国联合合同委员会制定的JCT合同条件。 1.1(FIDIC 合同范本 FIDIC是国际咨询工程师联合会的简称，是当今世界上最权威的咨询工程师组织。1999 年，FIDIC 正式出版了一系列新的标准合同条件，即《施工合同条件》(新红皮书)、《生产设备和设计-建造合同条件》 (新黄皮书)、《设计-采购-施工/交钥匙合同条件》 (银皮书)、《简明合同格式》(绿皮书)。 1.2(AIA 合同范本 AIA 是美国建筑师学会(The American Institute of Architects)的简称。AIA 出版的系列合同文件在国际工程承包界，特别是在美洲地区具有较高的权威性，应用广泛。AIA出版的合同文本可以按照两种方式来进行分类。第一种方式是按照“系列”(series)，即使用该合同文本的合同双方的关系,共分为五个系列。第二种方式是按照“族”(family)，即该合同文本所适用的工程建设模式,共分为八族。 1.3(ICE 合同范本与 NEC 合同范本 ICE 是英国土木工程师学会(The Institution of Civil Engineers)的简称。CE 在土木工程建设合同方面具有高度的权威性，对 FIDIC 合同条件有重要影响。
NEC最新版是 2005 年 7 月出版的第三版。NEC合同采用了全新的理念编制，其目的是增进合同各方的合作、建立团队精神，明确合同各方的风险分担，减少工程建设中的不确定性，减少索赔以及仲裁、诉讼的可能性。 1.4. JCT合同范本 JCT是英国合同审定联合会(Joint Contract Tribunal)的简称。从JCT合同内容来看，JCT章程对“标准合同”的定义为:“所有相互一致的合同文件组合，这些文本共同被使用，作为运作某一特定项目所必须的文件。”JCT 的工作是制作标准格式的组合，用于各种类型的工程承接。从其历史发展来看，JCT 先后发布了七版 JCT 合同范本。1909 年发布第一版，最新版2005年发布的一系列合同范本，全名为 JCT 2005 Suite，以下简称“JCT2005”。 2. JCT2005 Suite介绍 2.1 内容及格式 JCT 2005 不是一个单一的文本，而是由各种类型的合同构成的一整套文本。其中包括各类合同 12 种，例如小型工程建设合同、标准建造合同、设计建造合同、大型工程施工合同等等，还包括 4 种协议和抵押担保。每类合同又包括主合同、分包合同以及一些其他特 定类型的合同可能使用到的文件。 现在所有 JCT 2005 中包含的合同都采用如下统一的条款编排格式: (1)定义和解释;(2)工程实施;(3)工程监控;(4)支付;(5)变更;(6)伤害和损失保险;(7)转让、第三方权利和抵押担保;(8)终止;(9)争端的解决。 按这种分节的方式编排合同，其中每一节都涉及了建设工程的一个方面。这种按组编排的方式更具有逻辑性，避免了在合同中识别定位各方的义务等工作而来回翻阅合同的麻烦。 2.2. JCT合同范本特点
国际技术咨询服务合同范本 中英文对照版
编号：_____________ 国际技术咨询服务合同 委托方：___________________________ 咨询方：___________________________ 签订日期：_______年______月______日
中国________________________公司（以下简称委托方）为一方，_____国 __________________________ 公司（以下简称为咨询方）为另一方，双方就 _________________________的技术咨询服务，授权双方代表按下列条款签订本合同。 This Contract is made and entered into through friendly negotiation by and between China_________________________ (hereinafter referred to as “Client”)， as one party， and__________________________ (hereinafter referred to as“Consultant”)，as the other party， concerning the technical consultancy service of________________________， under the following terms and conditions: 第一条合同内容 Article 1 Contents of Technical Consultancy Service 1.1 委托方希望获得咨询方就___________________________提供的技术咨询服务，而咨询方愿意提供此项服务。 Whereas Client desires to obtain the technical consultancy service of from Consultant and Consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 The Scope of Technical Services is defined in Appendix 1. 1.3 技术咨询服务的进度安排详见本合同附件二。 The Time Schedule for the Services is shown in Appendix 2. 1.4 技术咨询服务的人员安排见本合同附件三。 The Manning Schedule is described in Appendix 3.
国际代理合同英文模版
International Agent Contract Principal: Address: Post Code: Tel: Fax: E-Mail: Agent: Address: Post Code: Tel: Fax: E-mail: Contract Number: Signature Date: Signature Place:
CONTENTS 1 Scope of Authority: (2) 2 Rights and obligations of the Agent (2) 3 The rights and obligations of the Principal (4) 4 Non-exclusive agency /Exclusive agent (5) 5 Commission and Reimbursement (5) 6 Confidentiality and Intellectual Property Right (7) 7 Termination of this Contract (8) 8. Unconcluded business (8) 9. Damages (8) 10 Force Majeure (9) 11 Return of documents and samples (9) 12 No Partnership (9) 13 Severability (9) 14 Non-Waiver (10) 15 Governing Language (10) 16 Applicable Law (10) 17 Arbitration (10)
JCT合同范本情况简介
JCT 合同范本情况简介 1. 国际知名工程合同范本 现在国际上具有影响力的合同示范文本主要包括：国际咨询工程师联合会制定的 FIDIC 系列合同、美国建筑师学会的 AIA 系列合同文件、英国土木工程师协会的 ICE 施工合同条件 及 NEC 施工合同条件、英国联合合同委员会制定的 JCT 合同条件。 1.1 ．FIDIC 合同范本 FIDIC 是国际咨询工程师联合会的简称，是当今世界上最权威的咨询工程师组织。 1999 年， FIDIC 正式出版了一系列新的标准合同条件，即《施工合同条件》 （ 新红皮书 ） 、《生产 设备和设计 - 建造合同条件》 （ 新黄皮书 ） 、《设计 - 采购 - 施工 / 交钥匙合同条件》 （ 银皮书 ） 、 《简明合同格式》 （绿皮书 ） 。 1.2 ．AIA 合同范本 适用的工程建设模式 , 共分为八族。 1.3 ．ICE 合同范本与 NEC 合同范本 月出版的第三版。 NEC 合同采用了全新的理念编制，其目的是增进合同各方的合作、 2. JCT2005 Suite 介绍 2.1 内容及格式 JCT 2005 不是一个单一的文本，而是由各种类型的合同构成的一整套文本。其中包括 AIA 是美国建筑师学会 (The American Institute of Architects) 的简称。 AIA 出版的系列合同 文件在国际工程承包界，特别是在美洲地区具有较高的权威性，应用广泛。 AIA 出版的合同 文本可以按照两种方式来进行分类。第一种方式是按照“系列” series ) 本的合同双方的关系 , 共分为五个系列。第二种方式是按照“族” family ) ，即使用该合同文 ，即该合同文本 ICE 是英国土木工程师学会（ The Institution of Civil Engineers 对 FIDIC 合同条件有重要影响。 ）的简称。 CE 在土木工程 建设合同方面具有高度的权威性， NEC 最新版是 2005 年 7 建立团 队精神，明确合同各方的风险分担， 减少工程建设中的不确定性， 减少索赔以及仲裁、 诉讼 的可能性。 1.4. JCT 合同范本 JCT 是英国合同审定联合会（ Joint Contract Tribunal ）的简称。从 JCT 合同内容来看， JCT 章程对“标准合同”的定义为： 所有相互一致的合同文件组合，这些文本共同被使用，作 为运作某一特定项目所必须的文件。 ” JCT 的工作是制作标准格式的组合，用于各种类型的 工程承接。从其历史发展来看， JCT 先后发布了七版 JCT 合同范本。 1909 年发布第一版， 最新版 2005 年发布的一系列合同范本，全名为 JCT 2005 Suite ，以下简称“ JCT2005 ”。
技术合同英文范本(2020版)
(合同范本) 姓 名：____________________ 单 位：____________________ 日 期：____________________ 编号： YW-HT-050018 技术合同英文范本(2020版) English model of technical contract
技术合同英文范本(2020版) 技术合同英文范文篇一 甲方：party a ： 乙方：party b ： 合同编号： contract no 日期：date ： 签约地点：signed at ： 特约定： 甲方基于下文所列各种因素，特与乙方达成了协议并一致同意：由甲方在订约日期之翌日起_____天之内为乙方建造并完成_____(涉约建筑)。涉约建筑之规模及所需的钢筋、水泥、砖块、石子和其它建筑材料之数量，均在作为合同附件的设计图和施工细则中予以说明。 witnesses that the party a for considerations hereinafter named, contracts
and agrees with the party b that party a will, within_____ days, next following the date hereof, build and finish a libarary building for party b. ( the building hereinafter is referred to as the said building.) the said building is of the following dimensions, with reinforced concrete, brick, stones and other materials, as are described in plans and specifications gereto annexed. 基于上述情况，乙方及其法定代表郑重承诺向甲方支付人民币_____元整。支付方法商定如下： in consideration of the foregoing, party b shall, for itself and its legal representatives, promise to pay party a the sum of one million rmb yuan in manner as follows, to wit： 在上述工程开工之日，支付人民币_____元整 在_____年_____月_____日，支付人民币_____元整 甲方：party a：乙方：party b： 合同编号：contract no 日期：date： 签约地点：signed at： 技术合同英文范文篇二 合同contract 日期：合同号码： date: contract no.: 买方：(the ;buyers) 卖方：(the sellers) 兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品： this contract is made by and between the buyers and the sellers; whereby
合同范本之英文技术服务合同模板
英文技术服务合同模板 篇一：国际技术咨询服务合同 （中英文 ）】 国际技术咨询服务合同 （中英文） technical consultancy service contract 合 同 号： contract no ___ 公司（以下简称委托方）为一方， ___________ 公司（以下简称为咨询方）为另一方，双方就 的技术咨询服务，授权双方代表按下列条款签订本 合同。 this contract is made and entered into through friendly negotiation by and between china ___________________________________________ (hereinafter referred to as “ client ” ), as one party, and ________________________ (hereinafter referred to as “ consultant ”),as the other party, concerning the technical consultancy service of __________ , under the following terms and conditions: 第一条 合同内容 article 1 contents of technical consultancy service whereas client desires to obtain the technical consultancy service of from consultant and consultant has agreed to perform such services. 1.2 技术咨询服务范围详见本合同附件一。 签订日期： date of signature: 签订地点： place of signature: 中国 1.1 委托方希望获得咨询方就 方愿意提供此项服务。 提供的技术咨询服务，而咨询
中英文项目合作协议书范本
中英文项目合作协议书范本 " Project cooperation agreement": 甲方：_________乙方：_________经甲、乙双方共同协商，本着互惠互利、共同发展 Party A: _ _ _ _ _ _ _ _ _ B: _ _ _ _ _ _ _ _ _ by a, B both negotiation, mutual benefit, common development 《项目合作协议范本》正文开始>>甲方：_________ " Project cooperation agreement" start of text >> A: _ _ _ _ _ _ _ _ _ 乙方：_________ B: _ _ _ _ _ _ _ _ _ 经甲、乙双方共同协商，本着互惠互利、共同发展，使中国秘书尽早走向职业化，达成如下合作协议： The A, B both negotiation, mutual benefit, common development, make Chinese secretary as early as possible to occupation, reached the following agreement: 一、甲方授权乙方为_________省_________市_________合作基地。同时为了维护双方的合法权益，乙方一次性向甲方交纳履约保证金_________元。 One, Party A authorizes Party B to _ _ _ _ _ _ _ _ _ province _ _ _ _ _ _ _ _ _ city _ _ _ _ _ _ _ _ _ cooperation base. At the same time in order to maintain the lawful rights and interests of both parties, Party B shall pay to party a one-off performance bond _ _ _ _ _ _ _ _ _ element. 二、甲方职责： In two, a duty: 1.向乙方提供合作范围内的《授权书》; 1 Party A shall provide to Party B within the scope of cooperation" authorization"; 2.向乙方颁发_________合作基地的铜牌; 2 Party B _ _ issued _ _ _ _ _ _ _ cooperation base bronze; 3.负责协助乙方办理_________证书; 3 assisting Party B with the _ _ _ _ _ _ _ _ _ certificate; 4.向乙方提供甲方的办学许可证、收费许可证复印件等有关证明文件; 4 Party A shall provide to Party B Party school license, charging a copy of the license and other relevant documents; 5.负责学生入学资格的审核、面试及录取工作; 5 is responsible for student admission qualification examination, interview and enrollment; 6.负责乙方教学大纲的制定及教学质量的监督和检查; 6 be responsible for working out a syllabus and teaching quality supervision and inspection; 7.学生在甲方学习期满成绩合格者，由甲方负责毕业证书的发放; 7 students in a learning period achievement eligible, by Party A is responsible for the issuance of a certificate of graduation; 8.精品秘书班、现代高等秘书班的学生学习期满成绩合格者，甲方负责安排就业。 8 fine secretary class, modern advanced secretarial class student learning expires achievement eligible, Party A is responsible for arranging employment. 三、乙方职责： Three, B: 1.负责在当地办理合作办学的有关手续; 1 is responsible for the local management cooperation in running schools of the relevant procedures;