紧固件中英文对照
Description in Chinese 英文品名
Desciption in English
圆锥销Taper pins
圆柱销Parallel pins
开槽圆柱头螺钉Slotted cheese head screws
开槽盘头螺钉Slotted pan head screws
单耳止动垫圈Tab washers
开口销Split cooter pins
开槽半沉头木螺钉Slotted raised csk head wood screws 开槽半圆头木螺钉Slotted round head wood screws 开槽沉头木螺钉Slotted countersunk head wood screws
平垫Plain washers
平垫(带倒角)Mediun washers
平垫Plain washers
重型弹垫Spring lock washers,tang ends
标准弹垫Spring lock washers,square ends
鞍形弹垫Single coil spring lock washers
弹簧止动垫圈Curved spring washers
波形弹垫Wave spring washers
T型方颈螺栓T-head blots with square neck
T型双接头螺栓T-head bolts with double nip
螺纹圆锥销Taper pins with threaded end
T型头螺栓T-head bolts
蝶型螺母(美制)Wing nuts America form
蝶型螺母(德制)Wing nuts germany form
蝶型螺母(美制)Wing screws America form
蝶型螺母(德制)Wing screws germany form
圆球型盖型螺母Ball knobs
开槽带孔球面
圆柱头蚴钉Slotted capstan screws
开槽长圆柱端
紧定螺钉Slotted set srews with full dog point
开槽平端
紧定螺钉(半牙)Slotted set srews with chamfered end
小六角特薄细牙
螺母Pip nuts with thread
外舌止动垫圈External tap
小垫圈
(用于圆柱头螺钉) Washers for cheese head screws 方斜垫圈(U型)Square taper washers for
U-section
方斜垫圈(I型)Square taper washers for
I-sections
方垫圈Square washers
开槽凹端紧定螺钉Slotted set with cup point
六角薄螺母Hexagon thin nuts
细牙六角薄螺母Hexagon thin nuts
木螺钉专用垫圈Rounds washers for wood constructions
密封帽Sealing caps,push-in type
活节螺栓B型Eye bolts form B
内舌止动垫圈Internal tab washers
双耳止动垫圈Washers with two taps
滚花高头螺钉Knurled thumb screws with collar
开槽滚花高头螺钉Slotted knurled thumb screws with collar 滚花高螺母Knurled thumb nuts with collar
滚花薄螺母Knurled thumb thin nuts
锁紧垫圈Sealing washers
轴用弹性垫圈Retaining rings for shafts(external),circlips 孔用弹性垫圈Retaining rings for bores(internal),circlips 方头带垫螺栓Square head bolts with collar
方头圆柱底端螺栓Square head bolts with half dog point
方头带垫关圆底端
螺栓Square head bolts with collar,half dog point
T型槽螺母T-slot nuts
单头螺柱Single end studs
地脚螺栓Masonry bolts
带槽圆螺母Slotted round nuts
端面带孔圆螺母Round nuts with drilled holes in one face 开槽平端紧定螺钉Slotted set screws with flat point
开槽锥端紧定螺钉Slotted set screws with cone point
六角螺母Hexagon nuts
方螺母-C Square nuts
六角头螺钉Hexagon screws
六角头圆柱端
紧定螺钉Hexagon set screws with full dog point
薄型方螺母-B Square nuts without bevel
(pressed nuts)
六角头木螺钉Hexgon head wood screw
(coach screws)
吊环螺钉Lifting eye bolts
吊环螺母Lifting eye nuts
圆锥型槽销Grooved pins,taper grooved
圆锥型槽销
(半槽)Grooved pins,taper grooved half length
平行槽销
(带倒角)Grooved pins,parallel grooved full length
前端凹槽槽销Grooved pins,reverve grooved half length 中部凹槽槽销Grooved pins,center grooved
圆头槽销Grooved pins with round head
沉头槽销Grooved pins with countersunk head
六角螺母棒Turnuckles(center parts),made out of hexagon bar
花蓝螺栓Turnuckles with eye bolt and hook bolt
弹性圆柱销Spring pins,heavy type
组合式盖型螺母Hexagon domed cap nuts
开槽圆螺母
(配合沟头扳手) Slotted round nuts for hook spammer
圆螺母(带插销孔)Round nuts with set holes
盘型弹簧垫圈Disc springs
喉箍Hose clamps
润滑油嘴
(旋扭头)Lubricating nipples,button head
管夹Shackles for conduilts
U型螺栓Stirrup bolts(U-bolts)
球面垫圈Spherical washers,conical seats
圆柱销Parallel pins
厚六角螺母Hexagon nuts,1.5d
厚六角法兰面
螺母Hexagon nuts,1.5d with collar
长六角螺母Hexagon nuts,3d
外齿锁紧垫圈External teeth lock washers
内齿锁紧垫圈Internal teeth lock washers
外锯齿锁紧垫圈External teeth serrated lock washers
内锯齿锁紧垫圈Internal teeth serrated lock washers
开口挡圈Retaining rings for shafts(E-rings),circlips
平键(A型)Parallel keys(form A)
半圆键Woodruff keys
嵌环(支撑环)Thimbles
机器螺钉和垫圈
组合件Screws and washers assemblies
自攻螺钉和垫圈
组合件Tapping screws and washer assemblies
薄型带孔
内六角圆柱螺钉Hexagon cocket head cap screws with hole,low head
大六角头螺栓Hexagon head bolts with large head
(friction grip nolts)
大六角螺母Hexagon nuts with large wideth across flat
(friction grip nuts)
大垫圈Round washers for friction grip bolts
楔型方垫圈Spuare taper washers for friction grip bolts on T-
六角法兰面螺母Hexagon flange nuts
全金属六角锁紧螺母(2型)Prevailing torque type hexagon nuts,all metallic nuts
轻型弹性圆柱销Spring pins,light type
重型弹性圆柱
销用垫圈Washers for bolts with heavy type spring pinss
ISO公制螺纹螺钉(多种头型)Thread forming screws for ISO-metric thread
自攻自钻螺钉
(多种头型)Self-drilling tapping screws
开槽切削螺纹螺钉(多种头型)Thread cutting screws 十字槽切削螺纹螺钉(多种头型)Thread cutting screws cross recess
T型四爪螺母Tee nuts with pronge
钢结构用六角头螺栓连接副Hexagon head fitted bolts for steel structures
开槽盘头
自攻螺钉Pan head tapping screws with slot
开槽沉头
自攻螺钉countersunk flat head tapping screws with slot
开槽半沉头
自攻螺钉Raised sountersunk oval head tapping screws with slot
六角头自攻螺钉Hexagon tapping screws
圆柱头螺钉用
弹簧垫圈Spring lock washers for screws with cylindrical heads
十字槽盘头
自攻螺攻Pan head tapping screws with cross recessed
十字槽沉头
自攻螺攻Countersunk flat head tapping screws with cross recessed
十字槽半沉头
自攻螺攻Raised countersunk oval head tapping screws with cross
薄型内六角
圆柱头螺钉Hexagon socket head cap screws with,reduced head
十字槽盘头螺钉Pan head screws with cross recessed
钢结构用垫圈Washers for steel structures
钢结构用
六角头螺栓Hexagon head bolts for steel structures
内六角沉头螺钉Hexagon socket coutersunk head screws
轴用钢丝挡圈Roundwire snap rings for shafts
十字槽半沉头
木螺钉Cross recessed raised countersunk head wood screws
十字槽圆头
木螺钉Cross recessed round head wood screws
十字槽沉头
木螺钉Cross recessed countersunk head wood screws
螺纹护套
(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking
大外径垫圈Washers,outside diameter appro.3d
弹簧卡子sping cotter for a bolt
平板螺栓Belting bolts
(elevator bolts)
干壁钉
(墙板钉)Dry wall screws
环型螺母Lifting nuts(eye nuts)
圆螺母用止退
垫圈Tab washer for slotted round nuts
果博东方,果博东方开户,果博东方三合一https://www.360docs.net/doc/2c274456.html,
ev0KbBJWNEyM