huawei

<....>
User view commands:
backup Backup next startup-configuration file to TFTP server
boot-loader Set boot loader
bootrom Update/read/backup/restore bootrom
cd Change current directory
clock Specify the system clock
cluster Run cluster command
copy Copy from one file to another
debugging Enable system debugging functions
delete Delete a file
dir List files on a file system
display Show running system information
fixdisk Recover lost chains in storage device
format Format the device
free Clear user terminal interface
ftp Open FTP connection
lock Lock current user terminal interface
mkdir Create a new directory
more Display the contents of a file
move Move the file
ntdp Run NTDP commands
ping Ping function
pwd Display current working directory
quit Exit from current command view
reboot Reboot system
rename Rename a file or directory
reset Reset operation
restore Restore next startup-configuration file from TFTP server
rmdir Remove an existing directory
save Save current configuration
schedule Schedule system task
send Send information to other user terminal interface
sftp Establish one SFTP connection
ssh2 Establish a secure shell client connection
stack Switch stack system
startup Specify system startup parameters
super Set the current user priority level
system-view Enter the System View
telnet Establish one TELNET connection
terminal Set the terminal line characteristics
tftp Open TFTP connection
tracert Trace route function
undelete Recover a deleted file
undo Cancel current setting
xmodem Establish an xmodem connection

[...]
System view commands:
acl Specify acl configuration information
arp Specify ARP configuration information
bootrom-update bootrom update
bpdu-tunnel Specify BPDU tunnel function
cluster Specify cluster configuration information
command-privilege Specify the command level
cut Cut connection
delete Delete function
dhcp Specify DHCP(Dynamic Host Configuration
Protocol)service
dhcp-snooping DHCP Snooping
display Display current system information
dns Specify domain name system
domain Add domain or modify domain attributes
dot1x Specify 802.1X configuration information
execute Batch Command
file Specify file system configuration information
ftp Spec

ify FTP server configuration information
garp Generic Attribute Registration Protocol
gratuitous-arp-learning Gratuitous Arp learning function
gratuitous-arp-sending Sending gratuitous-arp packet when receiving
different sub-network arp packet function
gvrp GARP VLAN Registration Protocol
habp Specify HABP configuration information
header Specify the login banner
hotkey Specify hotkey configuration information
hwtacacs Specify HWTACACS server
igmp-snooping IGMP snooping
info-center Specify information center configuration information
interface Specify the interface configuration view
ip Specify IP configurations for the system
ipv6 Enable IPv6 functionality
lacp Configure LACP Protocol
link-aggregation Configure a link aggregation group
local-user Specify local user configuration information
loopback-detection Detect if loopback exists
mac-address Configure MAC address
mac-authentication Specify Mac-auth configuration information
mac-vlan Specify the MAC VLAN configuration information
management-vlan Specify management-vlan
mirroring-group Specify mirroring-group
mld-snooping Enter mld-snooping view
multicast-vlan Multicast VLAN
ndp Neighbor discovery protocol
nqa Specify NQA (Network Quality Analyzer) configuration
information
ntdp Specify NTDP configuration information
ntp-service Specify NTP(Network Time Protocol) configuration
information
ping Ping function
pki Specify PKI module configuration information
port-group Port group
port-security Specify port-security configuration information
public-key Specify public-key module configuration information
qinq Specify 802.1Q-in-Q VPN function
qos Command of QoS(Quality of Service)
quit Exit from current command view
radius Specify RADIUS configuration information
return Exit to User View
rip Specify RIP(Routing Information Protocol)
configuration information
ripng Specify RIPng(Routing Information Protocol for
IPv6)configuration information
rmon Specify RMON
route-policy Route-policy
save Save current configuration
sftp Specify SFTP service attribute
snmp-age

nt Specify SNMP(Simple Network Management Protocol)
configuration information
ssh Specify SSH (secure shell) configuration information
ssl Specify SSL (Secure Socket Layer) configuration
information
stack Switch stack system
storm-constrain Port storm-constrain
stp Spanning tree protocol
super Modify super password parameters
sysname Specify the host name
tcp Specify TCP(Transmission Control Protocol)
configuration information
telnet Specify TELNET configuration information
tftp Specify TFTP configuration information
tftp-server TFTP Server
time-range Specify time-range configuration information
tracert Trace route function
track Specify track information
traffic Specify traffic configuration information
udp-helper UDP HELPER module
undo Cancel current setting
user-interface Configure the user terminal interface
vlan Configure VLAN
voice Specify voice VLAN


[switchA-cluster]
Cluster view commands:
add-member Add a cluster member
administrator-address Specify cluster administrator MAC address
auto-build Auto build cluster
black-list Black-list
build Establish a cluster, and specify the device as an
administrator
delete-member Delete a cluster member
display Display current system information
ftp-server Specify FTP server for cluster
holdtime Specify the status holdtime after handshake timeout
(in second)
ip-pool Specify cluster ip pool
logging-host Specify logging host for cluster
nm-interface Specify cluster network management interface
ping Ping function
quit Exit from current command view
reboot Reboot cluster member
return Exit to User View
save Save current configuration
snmp-host Specify SNMP host for cluster
tftp-server Specify TFTP server for cluster
timer Specify the interval for periodically sending
handshake packets (in second)
topology Configure topology information
tracert Trace route function
undo Cancel current setting


Cluster view commands:
add-member Add a cluster member
administrator-address Specify cluster administrator MAC address
auto-build

Auto build cluster
black-list Black-list
build Establish a cluster, and specify the device as an
administrator
delete-member Delete a cluster member
display Display current system information
ftp-server Specify FTP server for cluster
holdtime Specify the status holdtime after handshake timeout
(in second)
ip-pool Specify cluster ip pool
logging-host Specify logging host for cluster
nm-interface Specify cluster network management interface
ping Ping function
quit Exit from current command view
reboot Reboot cluster member
return Exit to User View
save Save current configuration
snmp-host Specify SNMP host for cluster
tftp-server Specify TFTP server for cluster
timer Specify the interval for periodically sending
handshake packets (in second)
topology Configure topology information
tracert Trace route function
undo Cancel current setting


Gigabitethernet_l2 interface view commands:
bpdu-tunnel Specify BPDU tunnel function
broadcast-suppression Specify the broadcast storm control
description Describe the interface
dhcp-snooping DHCP Snooping
display Display current system information
dot1x Specify 802.1X configuration information
duplex Status of duplex
enable Enable function
flow-control Flow control command
garp Generic Attribute Registration Protocol
gvrp GARP VLAN Registration Protocol
igmp-snooping Configure IGMP snooping characteristic
jumboframe Jumboframe command
lacp Configure LACP Protocol
loopback Specify loopback of current port
loopback-detection Detect if loopback exists
mac-address Configure MAC address
mac-authentication Specify Mac-auth configuration information
mac-vlan Specify MAC VLAN
mdi Specify mdi type
mirroring-group Specify mirroring-group
mirroring-port Specify mirroring port
mld-snooping Configure MLD snooping characteristic
monitor-port Specify monitor port
multicast-suppression Specify the multicast storm control
ndp Neighbor discovery protocol
ntdp Specify NTDP configuration information
ping Ping function
port Specify Port characteristics
port-isolate Specify port-isolate configuration information
port-security Specify port-security c

onfiguration information
qinq Specify 802.1Q-in-Q VPN function
qos Command of QoS(Quality of Service)
quit Exit from current command view
return Exit to User View
rmon Specify RMON
save Save current configuration
shutdown Shut down this interface
speed Specify speed of current port
storm-constrain Port storm-constrain
stp Spanning tree protocol
tracert Trace route function
undo Cancel current setting
unicast-suppression Specify the unicast storm control
virtual-cable-test display virtual cable test information
voice Specify voice VLAN