IEEE论文格式模板

合集下载

IEEE标准格式

IEEE标准格式论文题目(使用格式:论文标题)根据需要加的副标题第一隶属关系者姓名(第一作者姓名)第一行(作者隶属关系的):部、组织名称第二行:组织名称、可接受的缩写第三行:城市、国家第二联系者姓名(第二作者姓名)第一行(作者隶属关系的):部、组织名称第二行:组织名称、可接受的缩写第三行:城市、国家摘要——这个电子文档就是一个“活”的模板。

论文的各个组成部分(标题，文字，页眉等)已经被定义在格式表上，本文中将对部分内容进行介绍。

在论文的标题、摘要中不要使用特殊字符、特殊符号或者数学符号。

(摘要) 关键字——组成部分;格式;类型;样式;插入(关键字)一、引言(标题1)所有的稿件必须用英文书写。

本文中的这些准则包括字体，间距及出版论文全文的相关信息的完整描述。

请遵循这些准则，如果你有任何问题，请直接到会议出版服务(CPS)处询问负责你论文出版的编辑。

联系电话:+1(714)821-8380，传真:+1(714)761-1784。

此模板给准备论文电子版的作者提供了其所需的许多格式规范。

所有标准论文组件从三分方面指定:(1)方便个人论文规范化;(2)自觉遵守便于目前或以后出版电子稿论文的需求;(3)会议论文集中使用统一的格式、页边距、列宽、行距和内置的格式样式;该文章列举了格式样式的例子，例子在括号内用斜体字进行标注，请遵循例子的格式。

请不要重置页边距。

像多次方程、图形及表格类的论文组成部分，本文并没有给出规定，但给出了不同的图标文本类型。

有必要时可更改这些格式，并制定需要遵循的适用标准。

二、论文格式及字体无论何处用到Times字体时，都需要用Times Roman或Times New Roman字体。

如果文字处理器没有这两种字体，请选择外观与Times字体相近的字体。

应尽可能地避免使用位图字体，首选使用True-Type1或Open Type字体。

对于数学公式等，请使用公式编辑器将其插入。

三、使用说明A、选择一个模板(标题2)首先，要确保选择一个与自己论文尺寸相符的合适的模板，且该模板应符合美国论文打印的论文纸的规格。

IEEE论文格式模板

IEEE论文格式模板标题：基于深度学习的图像识别算法研究摘要：近年来，随着深度学习技术的发展，图像识别领域取得了重大突破。

本文针对图像识别算法在深度学习框架下的应用进行了研究和分析。

首先，介绍了图像识别的背景和研究意义。

然后，详细阐述了深度学习的基本原理和常用算法。

接着，提出了一种基于卷积神经网络和循环神经网络的图像识别算法，并对其进行了实验验证。

最后，对实验结果进行了分析，并展望了未来的研究方向。

关键词：深度学习，图像识别，卷积神经网络，循环神经网络第1节：引言图像识别是计算机视觉领域中的一个重要研究方向。

随着计算机硬件性能的不断提升和深度学习算法的发展，图像识别的准确率和应用范围得到了极大的提升。

深度学习是一种模拟人脑神经网络的算法，通过多层神经网络学习大量的数据特征，从而实现高效的图像识别。

本文旨在研究基于深度学习的图像识别算法，并通过实验验证其性能。

第2节：深度学习算法深度学习算法是一种通过多层神经网络进行特征学习和模式识别的算法。

本文主要关注基于卷积神经网络（Convolutional Neural Network，CNN）和循环神经网络（Recurrent Neural Network，RNN）的深度学习算法。

卷积神经网络通过卷积操作和池化操作对图像进行特征提取，并通过全连接层进行分类。

循环神经网络通过神经元之间的状态信息传递实现对序列数据的处理，适用于图像序列等应用场景。

第3节：基于深度学习的图像识别算法基于深度学习的图像识别算法主要分为训练和测试两个阶段。

在训练阶段，通过构建合适的深度学习网络结构，并使用反向传播算法进行参数更新，使得网络能够学习到图像的特征。

在测试阶段，将待识别的图像输入训练好的网络，通过前向传播得到图像的分类结果。

第4节：实验与结果分析本文通过在图像识别数据集上进行实验，评估了基于深度学习的图像识别算法的性能。

实验结果显示，该算法在图像分类准确率和检测效果方面均优于传统的图像识别算法。

ieee论文格式模板

ieee论文格式模板下面是由整理的ieee论文格式模板，谢谢你的阅读。

ieee论文格式模板1、题目：应简洁、明确、有概括性，字数不宜超过20个字。

2、摘要：要有高度的概括力，语言精练、明确，中文摘要约100—200字;3、关键词：从论文标题或正文中挑选3～5个最能表达主要内容的词作为关键词。

5、正文：论文正文字数一般应在3000字以上。

论文正文：包括前言、本论、结论三个部分。

前言(引言)是论文的开头部分，主要说明论文写作的目的、现实意义、对所研究问题的认识，并提出论文的中心论点等。

前言要写得简明扼要，篇幅不要太长。

本论是论文的主体，包括研究内容与方法、实验材料、实验结果与分析(讨论)等。

在本部分要运用各方面的研究方法和实验结果，分析问题，论证观点，尽量反映出自己的科研能力和学术水平。

结论是论文的收尾部分，是围绕本论所作的结束语。

其基本的要点就是总结全文，加深题意。

6、谢辞：简述自己通过做论文的体会，并应对指导教师和协助完成论文的有关人员表示谢意。

7、参考文献：在论文末尾要列出在论文中参考过的专著、论文及其他资料，所列参考文献应按文中参考或引证的先后顺序排列。

8、注释：在论文写作过程中，有些问题需要在正文之外加以阐述和说明。

9、附录：对于一些不宜放在正文中，但有参考价值的内容，可编入附录中。

关于ieee的论文范文基于ATmega128的IEEE标准电脑鼠硬件设计与实现[关键词]电脑鼠;ATmega128 红外传感器迷宫中图分类号：TP393.08 文献标识码：A 文章编号：1009-914X(2016)01-0276-01引言“IEEE标准电脑鼠走迷宫竞赛(IEEE Micromouse ComPetition)，采用微控制器制作电脑鼠，设计相应的算法和程序，按照IEEE国际竞赛标准进行竞赛[1]。

该竞赛在国际上已开展了30多年，不少高校还开设了相应课程。

它可以在“迷宫中自动感知并记忆迷宫地图，通过一定的算法寻找一条最佳路径，以最快的速度到达目的地。

ieee英文论文格式.doc

ieee 英文论文格式【篇一：ieee 英文论文格式模板】preparation of papers for ieee transactions and journals (march2005)first a. author, second b. author, jr., and third c. author,member, ieee?abstract —these instructions give you guidelines for preparingpapers for ieee transactions and journals. use this documentas a template if you are using microsoft word 6.0 or later.otherwise, use this document as an instruction set. theelectronic file of your paper will be formatted further at ieee.define all symbols used in the abstract. do not cite referencesin the abstract. do not delete the blank line immediately abovethe abstract; it sets the footnote at the bottom of this column.point and either use insert | picture | from file or copy theimage to the windows clipboard and then edit | paste special |picture (with ―float over text ‖unchecked).ieee will do the final formatting of your paper. if your paper isintended for a conference, please observe the conference pagelimits.ii. procedure for paper submission a. review stageplease check with your editor on whether to submit yourmanuscript by hard copy or electronically for review. if hardcopy, submit photocopies such that only one column appearsper page. this will give your referees plenty of room to writecomments. send the number of copies specified by your editor(typically four). if submitted electronically, find out if youreditor prefers submissions on disk or as e-mail attachments. ifyou want to submit your file with one column electronically,please do the following:--first, click on the view menu and choose print layout. --second, place your cursor in the first paragraph. go to theformat menu, choose columns, choose one column layout, andchoose ―apply to whole document ‖from the dropdown menu.--third, click and drag the right margin bar to just over 4inches in width.the graphics will stay in the ―second‖column, but you can drag them to the first column. make the graphic wider to pushout any text that may try to fill in next to the graphic.b. final stagewhen you submit your final version, after your paper has been accepted, print it in two-column format, including figures andtables. send three prints of the paper; two will go to ieee andone will be retained by the editor-in-chief or conferencepublications chair.you must also send your final manuscript on a disk, whichieee will use to prepare your paper for publication. write theauthors ’names on the disk la bel. if you are using a macintosh, please save your file on a pc formatted disk, if possible. youmay use zip or cd-rom disks for large files, or compress filesusing compress, pkzip, stuffit, or gzip.also send a sheet of paper with complete contact informationfor all authors. include full mailing addresses, telephonenumbers, fax numbers, and e-mail addresses. this informationwill be used to send each author a complimentary copy of the1index terms —about four key words or phrases in alphabetical order, separated by commas. for a list of suggested keywords,send a blank e-mail to or visit the ieee web site ati. introduction this document is a template for microsoft word versions 6.0 orlater. if you are reading a paper version of this document,please download the electronic file, trans-jour.doc, from soyou can use it to prepare your manuscript. if you would preferto use latex, download ieee ’s latex style and sample files from the same web page. use these latex files for formatting, butplease follow the instructions in trans-jour.doc or trans-jour.pdf.if your paper is intended for a conference, please contact your conference editor concerning acceptable word processorformats for your particular conference.when you open trans-jour.doc, se lect ―page layout ‖from the ―view ‖menu in the menu bar (view | page layout), which allows you to see the footnotes. then type over sections oftrans-jour.doc or cut and paste from another document andthen use markup styles. the pull-down style menu is at the leftof the formatting toolbar at the top of your word window (forexample, the style at this point in the document is ―text ‖). highlight a section that you want to designate with a certainstyle, then select the appropriate name on the style menu. thestyle will adjust your fonts and line spacing. do not change thefont sizes or line spacing to squeeze more text into a limitednumber of pages. use italics for emphasis; do not underline.to insert images in word, position the cursor at the insertionthis work was supported by national science council, taipei,taiwan, r.o.c. project no. nsc xx-xxxx-x-xxx-xxx..journal in which the paper appears. in addition, designate oneauthor as the ―corresponding author. ‖this is the author towhom proofs of the paper will be sent. proofs are sent to thecorresponding author only.fonts when creating your figures, if possible.4) other ways: experienced computer users can convertfigures and tables from their original format to tiff. some usefulimage converters are adobe photoshop, corel draw, andmicrosoft photo editor, an application that is part of microsoftc. figuresoffice 97 and office 2000 (look for c:program filescommonall tables and figures will be processed as images. however,files microsoft shared photoed photoed.exe. (you may ieeecannot extract the tables and figures embedded in have tocustom-install photo editor from your original office yourdocument. (the figures and tables you insert in your disk.)document are only to help you gauge the size of your paper,for here is a way to make tiff image files of tables. first, createthe convenience of the referees, and to make it easy for you toyour table in word. use horizontal lines but no vertical lines.distribute preprints.) therefore, submit, on separate sheets ofhide gridlines (table | hide gridlines). spell check the table topaper, enlarged versions of the tables and figures that removeany red underlines that indicate spelling errors. adjust appearin your document. these are the images ieee will magnification(view | zoom) such that you can view the entire scan andpublish with your paper. table at maximum area when youselect view | full screen.move the cursor so that it is out of the way. press ―print screen ‖ d. electronic image files (optional)you will have the greatest control over the appearance of onyour keyboard; this copies the screen image to the windowsyour figures if you are able to prepare electronic image files. ifclipboard. open microsoft photo editor and click edit | paste asyou do not have the required computer skills, just submitpaper new image. crop the table image (click select button;select thepart you want, then image | crop). adjust the properties of theprints as described above and skip this section.1) easiest way: if you have a scanner, the best and quickestimage (file | properties) to monochrome (1 bit) and 600 pixelsway to prepare noncolor figure files is to print your tables andper inch. resize the image (image | resize) to a width of 3.45figures on paper exactly as you want them to appear, scanthem, inches. save the file (file | save as) in tiff with no andthen save them to a file in postscript (ps) or encapsulatedcompression (click ―more‖button).most graphing programs allow you to save graphs in tiff;postscript (eps) formats. use a separate file for each image.however, you often have no control over compression or filenames should be of the form ―fig1.ps ‖or ―fig2.eps. ‖2) slightly harder way: using a scanner as above, save thenumber of bits per pixel. you should open these image files ina images in tiff format. high-contrast line figures and tablesprogram such as microsoft photo editor and re-save themusing should be prepared with 600 dpi resolution and savedwith no no compression, either 1 or 8 bits, and either 600 or220 dpi compression, 1 bit per pixel (monochrome), with filenames of resolution (file | properties; image | resize). seesection ii- d2 the form ―fig3.tif ‖or ―table1.tif. ‖to obtain a 3.45-in figure for an explanation of number of bits andresolution. if your (one-column width) at 600 dpi, the figurerequires a horizontal graphing program cannot export to tiff,you can use the same size of 2070 pixels. typical file sizes willbe on the order of 0.5 technique described for tables in theprevious paragraph.a way to convert a figure from windows metafile (wmf) to mb.photographs and grayscale figures should be prepared withtiff is to paste it into microsoft powerpoint, save it in jpg 220dpi resolution and saved with no compression, 8 bits performat, open it with microsoft photo editor or similar converter,pixel (grayscale). to obtain a 3.45-in figure (one-column width)and re-save it as tiff.microsoft excel allows you to save spreadsheet charts in at220 dpi, the figure should have a horizontal size of 759 pixels.color figures should be prepared with 400 dpi resolution andgraphics interchange format (gif). to get good resolution,saved with no compression, 8 bits per pixel (palette or 256make the excel charts very large. then use the ―save ascolor). to obtain a 3.45-in figure (one column width) at 400 dpi,the figure should have a horizontal size of 1380 pixels.for more information on tiff files, please go to and click on thelink ―guidelines for author supplied electronic text andgraphics. ‖3) somewhat harder way: if you do not have a scanner, youmay create noncolor postscript figures by ―printing ‖them to files. first, download a postscript printer driver from (forwindows) or from (for macintosh) and install the ―generic postscript printer ‖definition. in word, paste your figure into anew document. print to a file using the postscript printer driver.file names should be of the form ―fig5.ps. ‖use adobe type 1 2fig. 1. magnetization as a function of applied field. notethat ―fig. ‖is abbreviated. there is a period after the figure number, followed by two spaces. it is good practice to explainthe significance of the figure in the caption.html ‖feature (see ). you can then convert from gif to tiff usingmicrosoft photo editor, for example.no matter how you convert your images, it is a good idea toprint the tiff files to make sure nothing was lost in theconversion.if you modify this document for use with other ieee journals or conferences, you should save it as type ―w o r d-2907006.0/95- rtf (*.doc) ‖so that it can be opened by any version of word.e. copyright forman ieee copyright form should accompany your finalsubmission. you can get a .pdf, .html, or .doc version at orfrom the first issues in each volume of the ieee transactionsand journals. authors are responsible for obtaining anysecurity clearances.iii. mathif you are using word, use either the microsoft equation editoror the mathtype add-on () for equations in your paper (insert |object | create new | microsoft equation or mathtypeequation). ―float over text ‖should not be selected.iv. unitsuse either si (mks) or cgs as primary units. (si units arestrongly encouraged.) english units may be used as secondaryunits (in parentheses). this applies to papers in data storage.for example, write ―15 gb/cm2 (100 gb/in2). ‖an exception is when engli sh units are used as identifiers in trade, such as ―3? in disk drive. ‖avoid combining si and cgs units, such ascurrent in amperes and magnetic field in oersteds. this oftenleads to confusion because equations do not balance3units for each quantity in an equation.v. helpful hintsa. figures and tablesbecause ieee will do the final formatting of your paper, you donot need to position figures and tables at the top and bottomof each column. in fact, all figures, figure captions, and tablescan be at the end of the paper. large figures and tables mayspan both columns. place figure captions below the figures;place table titles above the tables. if your figure has two parts,include the labels ―(a) ‖and ―(b) ‖as part of the artwork. please verify that the figures and tables you mention in the textactually exist. please do not include captions as part of thefigures. do not put captions in “text boxes ”linked to the figures. do not put borders around the outside of your figures.use the abbreviation ―fig. ‖even at the beginning of a sentence. do not abbreviate ―table. ‖tables are numbered with roman numerals.color printing of figures is available, but is billed to theauthors (approximately $1300, depending on the number offigures and number of pages containing color). include a notewith your final paper indicating that you request color printing.do not use color unless it is necessary for the proper interpretation of your figures. if youwant reprints of your colorarticle, the reprint order should be submitted promptly. there isan additional charge of $81 per 100 for color reprints. figureaxis labels are often a source of confusion. use words ratherthan symbols. as an example, write thequantity ―magnetization, ‖ or ―magnetization m, ‖ notjust ―m.‖ put units in parentheses. do not label axes only withunits. as in fig. 1, for example, write ―magnetization (a/m) ‖or ―magnetization (a?m?1), ‖ not just ―a/m. ‖ do not label axeswith a ratio of quantities and units. for example,write ―temperature (k), ‖ not ―temperature/k. ‖multipliers can be especially confusing. write ―magnetization(ka/m) ‖ or ―magnetization (103 a/m). ‖ do notwrite ―magnetization (a/m) ? 1000 ‖ because the reader wouldnot know whether the top axis label in fig. 1 meant 16000 a/mor 0.016 a/m. figure labels should be legible, approximately 8 to12 point type.b. referencesnumber footnotes separately in superscripts (insert | footnote).1 place the actual footnoteat the bottom of thecolumn in which it is cited; do not put footnotes in the reference list (endnotes). useletters for table footnotes (seetable i). please note that the references at the end of thisdocument are in the preferred referencing style. give allauthors ’ names; do not use ―et al. ‖ unless there are sixauthors or more. use a space after authors initials. papers thathave not been published should be cited as ―unpublished ‖ [4].papers that have been submitted for publication should becited as ―submitted for publication ‖ [5]. papers that have been accepted for publication, but not yet specified for anissue should be cited as ―to be published ‖ [6]. please give affiliations and addresses for private communications [7].capitalize only the first word in a paper title, except for propernouns and element symbols. for papers published in translation journals, please give theenglish citation first,followed by the original foreign-language citation [8].c. abbreviations and acronymsdefine abbreviations and acronyms the first time they are usedin the text, even after they have already been defined in theabstract. abbreviations such as ieee, si, ac, and dc do not haveto be defined. abbreviations that incorporate periods shouldnot have spaces: write ―c.n.r.s., ‖ not ―c. n. r. s. ‖ do not use abbreviations in the title unless they are unavoidable (forexample, ―ieee ‖ in the title of this article).d. equationsnumber equations consecutively with equation numbers inparentheses flush with the right margin, as in (1). first use theequation editor to create the equation. then selectthe ―equation ‖ markup style. press the tab key and write theequation number in parentheses. to make your equations morecompact, you may use the solidus ( / ), the exp function, orappropriate exponents. use parentheses to avoid ambiguitiesin denominators. punctuate equations when they are part of asentence, as in?r20f(r,?)drd??[?r2/(2?0)]?? ?0 (1)exp(??|zj?zi|)??1j1(?r2)j0(?ri)d?.be sure that the symbols in your equation have been definedbefore the equation appears or immediately following. italicizesymbols (t might refer to temperature, but t is the unit tesla).refer to ―(1), ‖ not ―eq. (1) ‖ or ―equation (1), ‖ except at the beginning of a sentence: ―equation (1) is ... . ‖e. other recommendationsuse one space after periods and colons. hyphenate complexmodifiers: ―zero-fi e ld- cooled magnetization. ‖ avoid dangling participles, such as, ―using (1), the potential was calculated. ‖[it is not clear who or what used (1).] write instead, ―the potential was calculated by using ( 1), ‖o r ―using (1), wecalculated the potential. ‖use a zero before decimal points: ―0.25, ‖n ot ―.25. ‖use ―cm3,‖ not ―cc. ‖ indicate sample dimensions as ―0.1cm ? 0.2 cm, ‖ not ―0.1 ? 0.2 cm2. ‖ the abbreviationfor ―seconds ‖ is ―s, ‖ not ―sec. ‖ do n o c o t mpi x l e t espellings and abbreviations of units: use ―wb/m2‖or ―webers per square meter, ‖ not ―webers/m2. ‖ whenexpressing a range of values, write ―7 to 9 ‖- 9o,r‖―7not ―7~9. ‖a parenthetical statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (aparenthetical sentence is punctuated within the parentheses.)in american english, periods and commas are within quotationmarks, like ―this period. ‖ other punctuationis ―outside ‖!avoid contractions; for example, wri te ―do not ‖i nsteadof ―don’t. ‖ the serial comma is preferred: ―a, b, andc ‖instead of ―a, b and c. ‖if you wish, you may write in the first person singular or pluraland use the active voice ( ―i observed that ... ‖ or ―we observed that ... ‖ instead of ―it was observed that ... ‖). remember to check spelling. if your native language is notenglish, please get a native english-speaking colleague toproofread your paper.it is recommended that footnotes be avoided (except for theunnumbered footnote with the receipt date on the first page).instead, try to integrate the footnote information into the text.1 4vi. some common mistakesbe aware of the different meanings of thehomophones ―affect ‖ (usually a verb) and ―effect ‖ (usually a noun), ―complement ‖ and ―compliment, ‖―discreet ‖and ―discrete, ‖―principal ‖ (e.g., ―principal investigator ‖) and ―principle ‖ (e.g., ―principle of measurement ‖). do not confuse ―imply ‖ and ―infer. ‖prefixes such as ―non, ‖―sub, ‖―micro, ‖―multi, ‖and ―ultra ‖ are not independent words; they should be joinedto the words they modify, usually without a hyphen. there is noperiod after the ―et ‖i n the latin abbreviation ―et al. ‖(it isalso italicized). the abbreviation ―i.e., ‖ means ―that is, ‖ and the abbreviation ―e.g., ‖ means ―for example ‖ (these abbreviations are not italicized).an excellent style manual and source of information forscience writers is [9]. a general ieee style guide, informationfor authors, is available atvii. editorial policysubmission of a manuscript is not required for participation ina conference. do not submit a reworked version of a paper youhave submitted or published elsewhere. do notpublish ―preliminary ‖data or results. the submitting author is responsible for obtaining agreement of all coauthors and anyconsent required from sponsors before submitting a paper.ieee transactions and journals strongly discourage courtesyauthorship. it is the obligation of the authors to cite relevantprior work.the transactions and journals department does not publishconference records or proceedings. the transactions doespublish papers related to conferences that have beenrecommended for publication on the basis of peer review. as amatter of convenience and service to the technical community,these topical papers are collected and published in one issueof the transactions.at least two reviews are required for every paper submitted. for conference-related papers, the decision to accept or rejecta5paper is made by the conference editors and publicationscommittee; the recommendations of the referees are advisoryonly. undecipherable english is a valid reason for rejection.authors of rejected papers may revise and resubmit them tothe transactions as regular papers, whereupon they will bereviewed by two new referees.viii. publication principlesthe contents of ieee transactions and journals are peer-reviewed and archival. the transactions publishes scholarlyarticles of archival value as well as tutorial expositions andcritical reviews of classical subjects and topics of currentinterest.authors should consider the following points:1) technical papers submitted for publication must advancethe state of knowledge and must cite relevant prior work. 2)the length of a submitted paper should be commensuratewith the importance, or appropriate to the complexity, of thework. for example, an obvious extension of previouslypublished work might not be appropriate for publication ormight be adequately treated in just a few pages.3) authors must convince both peer reviewers and the editorsof the scientific and technical merit of a paper; the standardsof proof are higher when extraordinary or unexpected resultsare reported.4) because replication is required for scientific progress,papers submitted for publication must provide sufficientinformation to allow readers to perform similar experiments orcalculations and use the reported results. although noteverything need be disclosed, a paper must contain new,useable, and fully described information. for example, aspecimens chemical composition need not be reported if themain purpose of a paper is to introduce a new measurementtechnique. authors should expect to be challenged byreviewers if the results are not supported by adequate dataand critical details.5) papers that describe ongoing work or announce the latesttechnical achievement, which are suitable for presentation at aprofessional conference, may not be appropriate forpublication in a transactions or journal.ix. conclusiona conclusion section is not required. although a conclusionmay review the main points of the paper, do not replicate theabstract as the conclusion. a conclusion might elaborate onthe importance of the work or suggest applications andextensions.appendixappendixes, if needed, appear before the acknowledgment.acknowledgmentthe preferred spelling of the word ―acknowledgment ‖in american english is without an ―e‖after the ―g. ‖use the【篇二：英文论文格式(参考ieee 会议论文格式)】paper titlesubtitle as neededauthors name/s per 1stline 1 (of affiliation): dept. name of organization line 2: name ofuniversity line 3: city, countryabstract —this electronic document is a “live ”template. the various components of your paper re already defined on thestyle sheet, as illustrated by the portions given in thisdocument.keywords-keyword1; keyword2; keyword3; keyword4i. introductionall manuscripts must be in english. these guidelines includecomplete descriptions of the fonts, spacing, and relatedinformation for producing your proceedings manuscripts.ii. type style and fontswherever times is specified, times roman or times new romanmay be used. if neither is available on your word processor,please use the font closest in appearance to times. avoid usingbit-mapped fonts if possible. true-type 1 or open type fonts arepreferred. please embed symbol fonts, as well, for math, etc.iii. ease of usea. selecting a templatefirst, confirm that you have the correct template for your papersize. this template has been tailored for output on the us-letterpaper size. if you are using a4-sized paper, please close thistemplate and download the file for a4 paper format called“cps_a4_format ”.b. maintaining the integrity of the specificationsthe template is used to format your paper and style the text. allmargins, column widths, line spaces, and text fonts areprescribed; please do not alter them. you may notepeculiarities. for example, the head margin in this templatemeasures proportionately more than is customary. thismeasurement and others are deliberate, using specificationsthat anticipate your paper as one part of the entire proceedings,and not as an independent document. please do not revise anyof the current designations.authors name/s per 2ndline 1 (of affiliation): dept. name of organizationiv. figure and tablev. conclusionacknowledgmentamerica the preferred spelling of the word “acknowledgment ”in is without an “e” after the “g”. avoid the x s p t i r l e t e s d s i e o n,“one of us (r.b.g.) thanks . . . ”instead, try “r.b.g. thanks ”applicable sponsor acknowledgments here; do not place themon the first page of your paper or as a footnote.references[1] g. eason, b. noble, and i. n. sneddon, “on certain integrals oflipschitz- hankel type involving products of bessel functions, ”phil. trans. roy. soc. london, vol. a247, pp. 529 –551, april 1955. (references)[2] j. clerk maxwell, a treatise on electricity and magnetism,3rd ed.,vol. 2. oxford: clarendon, 1892, pp.68 –73.[3] i. s. jacobs and c. p. bean, “fine particles, thin films andexchangeanisotropy, ”i n magnetism, vol. iii, g. t. rado and h. suhl, eds.new york: academic, 1963, pp. 271 –350.[4] k. elissa, “title of paper if known, ”u npublished.[5] r. nicole, “title of paper with only first word capitalized, ”j namestand. abbrev., in press.[6] y. yorozu, m. hirano, k. oka, and y. tagawa, “electronspectroscopy studies on magneto-optical media and plasticsubstrate interface, ” ieee transl. j. magn. japan, vol. 2, pp. 740741, august 1987 [digests 9th annual conf. magnetics japan, p.301, 1982].[7] m. young, the technical writer ’s handbook. mill valley, ca: university science, 1989.[8] electronic publication: digital object identifiers (dois):article in a journal:[9] d. kornack and p. rakic, “cell proliferation without neurogenesis inadult primate neocortex, ”s cience, vol. 294, dec. 2001, pp.2127-2130, doi:10.1126/science.1065467. article in a conferenceproceedings:[10] h. goto, y. hasegawa, and m. tanaka, “efficient schedulingfocusing on the duality of mpl representatives, ”p roc. ieeesymp. computational intelligence in scheduling (scis 07), ieeepress, dec. 2007, pp. 57-64, doi:10.1109/scis.2007.357670.table i.table type stylesfigure 1. example of a one-column figure caption.figure 2. example of a two-column figure caption: (a) this isthe format for referencing parts of a figure.【篇三：ieee 论文专用格式】paper title (use style: paper title) subtitle as needed(paper subtitle)authors name/s per 1st affiliation (author)line 1 (of affiliation): dept. name of organization line 2: name oforganization, acronyms acceptableline 3: city, countryline 4: e-mail address if desiredauthors name/s per 2nd affiliation (author)line 1 (of affiliation): dept. name of organization line 2: name oforganization, acronyms acceptableline 3: city, country line 4: e-mail address if desiredabstract —this e lectronic document is a “live ”template. the various components of your paper [title, text, heads, etc.] arealready defined on the style sheet, as illustrated by theportions given in this document. (abstract)keywords-component; formatting; style; styling; insert (keywords)i. 中文正文标题一在引言部分，可以采用中文书写。

IEEE 期刊论文word模版

Abstract—These instructions give you guidelines for preparing papers for IEEE T RANSACTIONS and J e this document as a template if you are using Microsoft Word6.0 or later. Otherwise, use this document as an instruction set. The electronic file of your paper will be formatted further at IEEE. Define all symbols used in the abstract. Do not cite references in the abstract. Do not delete the blank line immediately above the abstract; it sets the footnote at the bottom of this column.Index Terms—About four key words or phrases in alphabetical order, separated by commas. For a list of suggested keywords, send a blank e-mail to *****************or visit /organizations/pubs/ani_prod/keywrd98.txtI.I NTRODUCTIONHIS document is a template for Microsoft Word versions6.0 or later. If you are reading a paper or PDF version of this document, please download the electronic file, TRANS-JOUR.DOC, from the IEEE Web site at /web/publications/authors/transjnl/index.html so you can use it to prepare your manuscript. If you would prefer to use LATEX, download IEEE’s LATEX style and sample files from the same Web page. Use these LATEX files for formatting, but please follow the instructions in TRANS-JOUR.DOC or TRANS-JOUR.PDF.If your paper is intended for a conference, please contact your conference editor concerning acceptable word processor formats for your particular conference.When you open TRANS-JOUR.DOC, select “Page Layout” from the “View” menu in the menu bar (View | Page Layout), Manuscript received October 9, 2001. (Write the date on which you submitted your paper for review.) This work was supported in part by the U.S. Department of Commerce under Grant BS123456 (sponsor and financial support acknowledgment goes here). Paper titles should be written in uppercase and lowercase letters, not all uppercase. Avoid writing long formulas with subscripts in the title; short formulas that identify the elements are fine (e.g., "Nd–Fe–B"). Do not write “(Invited)” in the title. Full names of authors are preferred in the author field, but are not required. Put a space between authors’ initials.F. A. Author is with the National Institute of Standards and Technology, Boulder, CO 80305 USA (corresponding author to provide phone: 303-555-5555;fax:303-555-5555;e-mail:*******************.gov).S. B. Author, Jr., was with Rice University, Houston, TX 77005 USA. He is now with the Department of Physics, Colorado State University, Fort Collins, CO80523USA(e-mail:**********************.edu).T. C. Author is with the Electrical Engineering Department, University of Colorado, Boulder, CO 80309 USA, on leave from the National Research InstituteforMetals,Tsukuba,Japan(e-mail:**************.jp).which allows you to see the footnotes. Then, type over sections of TRANS-JOUR.DOC or cut and paste from another document and use markup styles. The pull-down style menu is at the left of the Formatting Toolbar at the top of your Word window (for example, the style at this point in the document is “Text”). Highlight a section that you want to designate with a certain style, then select the appropriate name on the style menu. The style will adjust your fonts and line spacing. Do not change the font sizes or line spacing to squeeze more text into a limited number of pages. Use italics for emphasis; do not underline. To insert images in Word, position the cursor at the insertion point and either use Insert | Picture | From File or copy the image to the Windows clipboard and then Edit | Paste Special | Picture (with “float over text” unchecked).IEEE will do the final formatting of your paper. If your paper is intended for a conference, please observe the conference page limits.II.P ROCEDURE FOR P APER S UBMISSIONA.Review StagePlease check with your editor on whether to submit your manuscript as hard copy or electronically for review. If hard copy, submit photocopies such that only one column appears per page. This will give your referees plenty of room to write comments. Send the number of copies specified by your editor (typically four). If submitted electronically, find out if your editor prefers submissions on disk or as e-mail attachments.If you want to submit your file with one column electronically, please do the following:--First, click on the View menu and choose Print Layout.--Second, place your cursor in the first paragraph. Go to the Format menu, choose Columns, choose one column Layout, and choose “apply to whole document” from the dropdown menu.--Third, click and drag the right margin bar to just over 4 inches in width.The graphics will stay in the “second” column, but you can drag them to the first column. Make the graphic wider to push out any text that may try to fill in next to the graphic.B.Final StageWhen you submit your final version (after your paper has been accepted), print it in two-column format, including figuresPreparation of Papers for IEEE T RANSACTIONSand J OURNALS(May 2007)First A. Author, Second B. Author, Jr., and Third C. Author, Member, IEEETand tables. You must also send your final manuscript on a disk, via e-mail, or through a Web manuscript submission system as directed by the society contact. You may use Zip or CD-ROM disks for large files, or compress files using Compress, Pkzip, Stuffit, or Gzip.Also, send a sheet of paper or PDF with complete contact information for all authors. Include full mailing addresses, telephone numbers, fax numbers, and e-mail addresses. This information will be used to send each author a complimentary copy of the journal in which the paper appears. In addition, designate one author as the “corresponding author.” This is the author to whom proofs of the paper will be sent. Proofs are sent to the corresponding author only.C.FiguresFormat and save your graphic images using a suitable graphics processing program that will allow you to create the images as PostScript (PS), Encapsulated PostScript (EPS), or Tagged Image File Format (TIFF), sizes them, and adjusts the resolution settings. If you created your source files in one of the following you will be able to submit the graphics without converting to a PS, EPS, or TIFF file: Microsoft Word, Microsoft PowerPoint, Microsoft Excel, or Portable Document Format (PDF).D.Electronic Image Files (Optional)Import your source files in one of the following: Microsoft Word, Microsoft PowerPoint, Microsoft Excel, or Portable Document Format (PDF); you will be able to submit the graphics without converting to a PS, EPS, or TIFF files. Image quality is very important to how yours graphics will reproduce. Even though we can accept graphics in many formats, we cannot improve your graphics if they are poor quality when we receive them. If your graphic looks low in quality on your printer or monitor, please keep in mind that cannot improve the quality after submission.If you are importing your graphics into this Word template, please use the following steps:Under the option EDIT select PASTE SPECIAL. A dialog box will open, select paste picture, then click OK. Your figure should now be in the Word Document.If you are preparing images in TIFF, EPS, or PS format, note the following. High-contrast line figures and tables should be prepared with 600 dpi resolution and saved with no compression, 1 bit per pixel (monochrome), with file names in the form of “fig3.tif” or “table1.tif.”Photographs and grayscale figures should be prepared with 300 dpi resolution and saved with no compression, 8 bits per pixel (grayscale).Sizing of GraphicsMost charts graphs and tables are one column wide (3 1/2 inches or 21 picas) or two-column width (7 1/16 inches, 43 picas wide). We recommend that you avoid sizing figures less than one column wide, as extreme enlargements may distort your images and result in poor reproduction. Therefore, it is better if the image is slightly larger, as a minor reduction in size should not have an adverse affect the quality of the image.Size of Author PhotographsThe final printed size of an author photograph is exactly 1 inch wide by 1 1/4 inches long (6 picas × 7 1/2 picas). Please ensure that the author photographs you submit are proportioned similarly. If the author’s photograph does not appear at the end of the paper, then please size it so that it is proportional to the standard size of 1 9/16 inches wide by 2 inches long (9 1/2 picas ×12 picas). JPEG files are only accepted for author photos.How to create a PostScript FileFirst, download a PostScript printer driver from /support/downloads/pdrvwin.htm(for Windows) or from /support/downloads/ pdrvmac.htm(for Macintosh) and install the “Generic PostScript Printer” definition. In Word, paste your figure into a new document. Print to a file using the PostScript printer driver. File names should be of the form “fig5.ps.” Use Open Type fonts when creating your figures, if possible. A listing of the acceptable fonts are as follows: Open Type Fonts: Times Roman, Helvetica, Helvetica Narrow, Courier, Symbol, Palatino, Avant Garde, Bookman, Zapf Chancery, Zapf Dingbats, and New Century Schoolbook.Print Color Graphics RequirementsIEEE accepts color graphics in the following formats: EPS, PS, TIFF, Word, PowerPoint, Excel, and PDF. The resolution of a RGB color TIFF file should be 400 dpi.When sending color graphics, please supply a high quality hard copy or PDF proof of each image. If we cannot achieve a satisfactory color match using the electronic version of your files, we will have your hard copy scanned. Any of the files types you provide will be converted to RGB color EPS files. Web Color GraphicsIEEE accepts color graphics in the following formats: EPS, PS, TIFF, Word, PowerPoint, Excel, and PDF. The resolution of a RGB color TIFF file should be at least 400 dpi.Your color graphic will be converted to grayscale if no separate grayscale file is provided. If a graphic is to appear in print as black and white, it should be saved and submitted as a black and white file. If a graphic is to appear in print or on IEEE Xplore in color, it should be submitted as RGB color. Graphics Checker ToolThe IEEE Graphics Checker Tool enables users to check graphic files. The tool will check journal article graphic files against a set of rules for compliance with IEEE requirements. These requirements are designed to ensure sufficient image quality so they will look acceptable in print. After receiving a graphic or a set of graphics, the tool will check the files against aset of rules. A report will then be e-mailed listing each graphic and whether it met or failed to meet the requirements. If the file fails, a description of why and instructions on how to correct the problem will be sent. The IEEE Graphics Checker Tool is available at /For more Information, contact the IEEE Graphics H-E-L-PDesk by e-mail at *****************. You will then receive an e-mail response and sometimes a request for a sample graphic for us to check.E.Copyright FormAn IEEE copyright form should accompany your final submission. You can get a .pdf, .html, or .doc version at /copyright.Authors are responsible for obtaining any security clearances.III.M ATHIf you are using Word,use either the Microsoft Equation Editor or the MathType add-on () for equations in your paper (Insert | Object | Create New | Microsoft Equation or MathType Equation). “Float over text” should not be selected.IV.U NITSUse either SI (MKS) or CGS as primary units. (SI units are strongly encouraged.) English units may be used as secondary units (in parentheses). This applies to papers in data storage. For example, write “15 Gb/cm2 (100 Gb/in2).” An exception is when English units are used as identifiers in trade, such as “3½-in disk drive.” Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leads to confusion because equations do not balance dimensionally. If you must use mixed units, clearly state the units for each quantity in an equation.The SI unit for magnetic field strength H is A/m. However, if you wish to use units of T, either refer to magnetic flux density B or magnetic field strength symbolized as µ0H. Use the center dot to separate compound units, e.g., “A·m2.”V.H ELPFUL H INTSA.Figures and TablesBecause IEEE will do the final formatting of your paper, you do not need to position figures and tables at the top and bottom of each column. In fact, all figures, figure captions, and tables can be at the end of the paper. Large figures and tables may span both columns. Place figure captions below the figures; place table titles above the tables. If your figure has two parts, include the labels “(a)” and “(b)” as part of the artwork. Please verify that the figures and tables you mention in the text actually exist. Please do not include captions as part of the figures. Do not put caption s in “text boxes” linked to the figures. Do not put borders around the outside of your figures. Use the abbreviation “Fig.” even at the beginning of a sentence. Do not abbreviate “Table.” Tables are numbered with Roman numerals.Color printing of figures is available, but is billed to the authors. Include a note with your final paper indicating that you request and will pay for color printing. Do not use color unless it is necessary for the proper interpretation of your figures. If you want reprints of your color article, the reprint order should be submitted promptly. There is an additional charge for colorTABLE IU NITS FOR M AGNETIC P ROPERTIESSymbol QuantityConversion from Gaussian andCGS EMU to SI a Φmagnetic flux 1 Mx → 10-8 Wb = 10-8 V·sB magnetic flux density,magnetic induction1 G → 10-4 T = 10-4 Wb/m2H magnetic field strength 1 Oe → 103/(4π) A/mm magnetic moment 1 erg/G = 1 emu→ 10-3 A·m2 = 10-3 J/T M magnetization 1 erg/(G·cm3) = 1 emu/cm3→ 103 A/m4πM magnetization 1 G → 103/(4π) A/mσspecific magnetization 1 erg/(G·g) = 1 emu/g → 1 A·m2/kg j magnetic dipolemoment1 erg/G = 1 emu→ 4π⨯ 10-10 Wb·m J magnetic polarization 1 erg/(G·cm3) = 1 emu/cm3→ 4π⨯ 10-4 Tχ,κsusceptibility 1 → 4πχρmass susceptibility 1 cm3/g → 4π⨯ 10-3 m3/kgμpermeability 1 → 4π⨯ 10-7 H/m= 4π⨯ 10-7 Wb/(A·m) μr relative permeability μ→μrw, W energy density 1 erg/cm3→ 10-1 J/m3N, D demagnetizing factor 1 → 1/(4π)Vertical lines are optional in tables. Statements that serve as captions for the entire table do not need footnote letters.a Gaussian units are the same as cgs emu for magnetostatics; Mx = maxwell, G = gauss, Oe = oersted; Wb = weber, V = volt, s = second, T = tesla, m = meter, A = ampere, J = joule, kg = kilogram, H = henry.Fig. 1. Magnetization as a function of applied field. Note that “Fig.” is abbreviated. There is a period after the figure number, followed by two spaces. It is good practice to explain the significance of the figure in the caption.reprints. Please note that many IEEE journals now allow an author to publish color figures on Xplore and black and white figures in print. Contact your society representative for specific requirements.Figure axis labels are often a source of confusion. Use words rather than symbols. As an example, write the quantity “Magnetization,” or “Magnetization M,” not just “M.” Put units in parentheses. Do not label axes only with units. As in Fig. 1, for example, write “Magnetization (A/m)” or “Magnetization (A⋅m-1),” not just “A/m.” Do not label axes with a ratio of quantities and units. For example, write “Temperature (K),” not “Temperature/K.”Multipliers can be especially confusing. Write “Magnetization (kA/m)” or “Magnetization (103A/m).” Do not write “Magnetization (A/m) ⨯1000” because the reader would not know whether the top axis label in Fig. 1 meant 16000 A/m or 0.016 A/m. Figure labels should be legible, approximately 8 to 12 point type.B.ReferencesNumber citations consecutively in square brackets [1]. The sentence punctuation follows the brackets [2]. Multiple references [2], [3] are each numbered with separate brackets [1]–[3]. When citing a section in a book, please give the relevant page numbers [2]. In sentences, refer simply to the reference number, as in [3]. Do not use “Ref. [3]” or “reference [3]” except at the beginning of a sentence: “Reference [3] shows ... .” Please do not use automatic endnotes in Word, rather, type the reference list at the end of the paper using the “References” style.Number footnotes separately in superscripts (Insert | Footnote).1 Place the actual footnote at the bottom of the column in which it is cited; do not put footnotes in the reference list (endnotes). Use letters for table footnotes (see Table I). Please note that the references at the end of this document are in the preferred referencing style. Give all authors’ names; do not use “et al.” unle ss there are six authors or more. Use a space after authors’ initials. Papers that have not been published should be cited as “unpublished” [4]. Papers that have been accepted for publication, but not yet specified for an issue should be cited as “to be published” [5]. Papers that have been submitted for publication should be cited as “submitted for publication” [6]. Please give affiliations and addresses for private communications [7].Capitalize only the first word in a paper title, except for proper nouns and element symbols. For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [8].C.Abbreviations and AcronymsDefine abbreviations and acronyms the first time they are used in the text, even after they have already been defined in the abstract. Abbreviations such as IEEE, SI, ac, and dc do not have 1It is recommended that footnotes be avoided (except for the unnumbered footnote with the receipt date on the first page). Instead, try to integrate the footnote information into the text. to be defined. Abbreviations that incorporate periods should not have spaces: write “C.N.R.S.,” not “C. N. R. S.” Do not use abbreviations in the title unless they are unavoidable (for example, “IEEE” in the title of this article).D.EquationsNumber equations consecutively with equation numbers in parentheses flush with the right margin, as in (1). First use the equation editor to create the equation. Then select the “Equation” markup style. Press the tab key and write the equation number in parentheses. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Use parentheses to avoid ambiguities in denominators. Punctuate equations when they are part of a sentence, as in.)()()||(exp)]2(/[),(21122λλλλλμσϕϕdrJrJzzrddrrFiijr-∞--⋅=⎰⎰(1)Be sure that the symbols in your equation have been defined before the equation appears or immediately following. Italicize symbols (T might refer to temperature, but T is the unit tesla). Refer to “(1),” not “Eq. (1)” or “equation (1),” except at the beginning of a sentence: “Equation (1) is ... .”E.Other RecommendationsUse one space after periods and colons. Hyphenate complex modifiers: “ze ro-field-cooled magnetization.” Avoid dangling participles, such as, “Using (1), the potential was calculated.” [It is not clear who or what used (1).] Write instead, “The potential was calculated by using (1),” or “Using (1), we calculated the potential.”Use a zero before decimal points: “0.25,” not “.25.” Use “cm3,” not “cc.” Indicate sample dimensions as “0.1 cm ⨯ 0.2 cm,” not “0.1 ⨯ 0.2 cm2.” The abbreviation for “seconds” is “s,” not “sec.” Do not mix complete spellings and abbreviations of units: use “Wb/m2” or “webers per square meter,” not “webers/m2.” When expressing a range of values, write “7 to 9” or “7-9,” not “7~9.”A parenthetical statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.) In American English, periods and commas are within quotation marks, like “this period.” Other punctuation is “outside”! Avoid contractions; for example, write “do not” instead of “don’t.” The serial comma is preferred: “A, B, and C” instead of “A,B and C.”If you wish, you may write in the first person singular or plural and use the active voice (“I observed that ...” or “We observed that ...” instead of “It was observed that ...”). Remember to check spelling. If your native language is not English, please get a native English-speaking colleague to carefully proofread your paper.VI.S OME C OMMON M ISTAKESThe word “data” is plural, not singular. The subscript for the permeability of vacuum µ0 is zero, not a lowerc ase letter “o.” The term for residual magnetization is “remanence”; the adjective is “remanent”; do not write “remnance” or “remnant.” Use the word “micrometer” instead of “micron.” A graph within a graph is an “inset,” not an “insert.” The word “alternatively” is preferred to the word “alternately” (unless you really mean something that alternates). Use the word “whereas” instead of “while” (unless you are referring to simultaneous events). Do not use the word “essentially” to mean “approximately” or “effectively.” Do not use the word “issue” as a euphemism for “problem.” When compositions are not specified, separate chemical symbols by en-dashes; for example, “NiMn” indicates the intermetallic compound Ni0.5Mn0.5whereas “Ni–Mn” indicates an alloy of some composition Ni x Mn1-x.Be aware of the different meanings of the homophones “affect” (usually a verb) and “effect” (usually a noun), “complement” and “compliment,” “discreet” and “discrete,” “principal” (e.g., “principal investigator”) and “principle” (e.g., “principle of measurement”). Do not confuse “imply” and “infer.”Prefixes such as “non,” “sub,” “micro,” “multi,” and “ultra” are not independent words; they should be joined to the words they modify, usually without a hyphen. There is no period after t he “et” in the Latin abbreviation “et al.” (it is also italicized). The abbreviation “i.e.,” means “that is,” and the abbreviation “e.g.,” means “for example” (these abbreviations are not italicized).An excellent style manual and source of information for science writers is [9]. A general IEEE style guide and an Information for Authors are both available at /web/publications/authors/transjnl/index.htmlVII.E DITORIAL P OLICYSubmission of a manuscript is not required for participation in a conference. Do not submit a reworked version of a paper you have submitted or published elsewhere. Do not publish “preliminary” data or results. The submitting author is responsible for obtaining agreement of all coauthors and any consent required from sponsors before submitting a paper. IEEE T RANSACTIONS and J OURNALS strongly discourage courtesy authorship. It is the obligation of the authors to cite relevant prior work.The Transactions and Journals Department does not publish conference records or proceedings. The T RANSACTIONS does publish papers related to conferences that have been recommended for publication on the basis of peer review. As a matter of convenience and service to the technical community, these topical papers are collected and published in one issue of the T RANSACTIONS.At least two reviews are required for every paper submitted. For conference-related papers, the decision to accept or reject a paper is made by the conference editors and publications committee; the recommendations of the referees are advisory only. Undecipherable English is a valid reason for rejection. Authors of rejected papers may revise and resubmit them to the T RANSACTIONS as regular papers, whereupon they will be reviewed by two new referees.VIII.P UBLICATION P RINCIPLESThe contents of IEEE T RANSACTIONS and J OURNALS are peer-reviewed and archival. The T RANSACTIONS publishes scholarly articles of archival value as well as tutorial expositions and critical reviews of classical subjects and topics of current interest.Authors should consider the following points:1)Technical papers submitted for publication must advancethe state of knowledge and must cite relevant prior work.2)The length of a submitted paper should be commensuratewith the importance, or appropriate to the complexity, of the work. For example, an obvious extension of previously published work might not be appropriate for publication or might be adequately treated in just a few pages.3)Authors must convince both peer reviewers and the editorsof the scientific and technical merit of a paper; the standards of proof are higher when extraordinary or unexpected results are reported.4)Because replication is required for scientific progress,papers submitted for publication must provide sufficient information to allow readers to perform similar experiments or calculations and use the reported results.Although not everything need be disclosed, a paper must contain new, useable, and fully described information. For example, a specimen’s chemical composition need not be reported if the main purpose of a paper is to introduce a new measurement technique. Authors should expect to be challenged by reviewers if the results are not supported by adequate data and critical details.5)Papers that describe ongoing work or announce the latesttechnical achievement, which are suitable for presentation at a professional conference, may not be appropriate for publication in a T RANSACTIONS or J OURNAL.IX.C ONCLUSIONA conclusion section is not required. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extensions.A PPENDIXAppendixes, if needed, appear before the acknowledgment.A CKNOWLEDGMENTThe preferred spelling of the word “acknowledgment” in American English is without an “e” after the “g.” Use the singular heading even if you have many acknowledgments.Avoid expr essions such as “One of us (S.B.A.) would like to thank ... .” Instead, write “F. A. Author thanks ... .” Sponsor and financial support acknowledgments are placed in the unnumbered footnote on the first page, not here.R EFERENCES[1]G. O. Young, “Synthetic st ructure of industrial plastics (Book style withpaper title and editor),” in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.[2]W.-K. Chen, Linear Networks and Systems (Book style).Belmont, CA:Wadsworth, 1993, pp. 123–135.[3]H. Poor, An Introduction to Signal Detection and Estimation. New York:Springer-Verlag, 1985, ch. 4.[4] B. Smith, “An approach to graphs of linear forms (Unpublished workstyle),” unpublished.[5] E. H. Miller, “A note on reflector arrays (Periodical style—Accepted forpublication),” IEEE Trans. Antennas Propagat., to be published.[6]J. Wang, “Fundamentals of erbium-doped fiber amplifiers arrays(Periodical style—Submitted for publication),” IEEE J. QuantumElectron., submitted for publication.[7] C. J. Kaufman, Rocky Mountain Research Lab., Boulder, CO, privatecommunication, May 1995.[8]Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopystudies on magneto-optical media and plastic substrate interfaces (Translation Journals style),” IEEE Transl. J. Magn.Jpn., vol. 2, Aug.1987, pp. 740–741 [Dig. 9th Annu. Conf. Magnetics Japan, 1982, p. 301].[9]M. Young, The Techincal Writers l Valley, CA:University Science, 1989.[10]J. U. Duncombe, “Infrared navigation—Part I: An assessment offeasibility (P eriodical style),” IEEE Trans. Electron Devices, vol. ED-11, pp. 34–39, Jan. 1959.[11]S. Chen, B. Mulgrew, and P. M. Grant, “A clustering technique fordigital communications channel equalization using radial basis function networks,” IEEE Trans. Neural Networks, vol. 4, pp. 570–578, Jul. 1993.[12]R. W. Lucky, “Automatic equalization for digital communication,” BellSyst. Tech. J., vol. 44, no. 4, pp. 547–588, Apr. 1965.[13]S. P. Bingulac, “On the compatibility of adaptive controllers (PublishedConference Proceedi ngs style),” in Proc. 4th Annu. Allerton Conf.Circuits and Systems Theory, New York, 1994, pp. 8–16.[14]G. R. Faulhaber, “Design of service systems with priority reservation,” inConf. Rec. 1995 IEEE Int. Conf. Communications, pp. 3–8.[15]W. D. Doyle, “Magnetization reversal in films with biaxial anisotropy,”in 1987 Proc. INTERMAG Conf., pp. 2.2-1–2.2-6.[16]G. W. Juette and L. E. Zeffanella, “Radio noise currents n short sectionson bundle conductors (Presented Conference Paper style),” presented at the IEEE Summer power Meeting, Dallas, TX, Jun. 22–27, 1990, Paper90 SM 690-0 PWRS.[17]J. G. Kreifeldt, “An analysis of surface-detected EMG as anamplitude-modulated noise,” presented at the 1989 Int. Conf. Medicine and Biological Engineering, Chicago, IL.[18]J. Williams, “Narrow-band analyzer (Thesis or Dissertation style),” Ph.D.dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.[19]N. Kawasaki, “Parametric study of thermal and chemical nonequilibriumnozzle flow,” M.S. thesis, Dept. Electron. Eng., Osaka U niv., Osaka, Japan, 1993.[20]J. P. Wilkinson, “Nonlinear resonant circuit devices (Patent style),” U.S.Patent 3 624 12, July 16, 1990.[21]IEEE Criteria for Class IE Electric Systems (Standards style),IEEEStandard 308, 1969.[22]Letter Symbols for Quantities, ANSI Standard Y10.5-1968.[23]R. E. Haskell and C. T. Case, “Transient signal propagation in losslessisotropic plasmas (Report style),” USAF Cambridge Res. Lab., Cambridge, MA Rep. ARCRL-66-234 (II), 1994, vol. 2.[24] E. E. Reber, R. L. Michell, and C. J. Carter, “O xygen absorption in theEarth’s atmosphere,” Aerospace Corp., Los Angeles, CA, Tech. Rep.TR-0200 (420-46)-3, Nov. 1988.[25](Handbook style) Transmission Systems for Communications,3rd ed.,Western Electric Co., Winston-Salem, NC, 1985, pp. 44–60.[26]Motorola Semiconductor Data Manual,Motorola SemiconductorProducts Inc., Phoenix, AZ, 1989. [27](Basic Book/Monograph Online Sources) J. K. Author. (year, month,day). Title (edition) [Type of medium]. Volume (issue). Available:http://www.(URL)[28]J. Jones. (1991, May 10). Networks (2nd ed.) [Online]. Available:[29](Journal Online Sources style) K. Author. (year, month). Title. Journal[Type of medium]. Volume(issue), paging if given. Available:http://www.(URL)[30]R. J. Vidmar. (1992, August). On the use of atmospheric plasmas aselectromagnetic reflectors. IEEE Trans. Plasma Sci. [Online]. 21(3). pp.876–880. Available: /pub/journals/21ps03-vidmarFirst A. Author(M’76–SM’81–F’87) and the other authors may include biographies at the end of regular papers. Biographies are often not included in conference-related papers. This author became a Member (M) of IEEE in 1976, a Senior Member (SM) in 1981, and a Fellow (F) in 1987. The first paragraph may contain a place and/or date of birth (list place, then date). Next, the author’s educational background is listed. The degrees should be listed with type of degree in what field, which institution, city, state, and country, and year degree was earned. The author’s major field of study should be lower-cased.The second paragraph uses the pronoun of the person (he or she) and not the author’s last name. It lists military and work experienc e, including summer and fellowship jobs. Job titles are capitalized. The current job must have a location; previous positions may be listed without one. Information concerning previous publications may be included. Try not to list more than three books or published articles. The format for listing publishers of a book within the biography is: title of book (city, state: publisher name, year) similar to a reference. Current and previous research interests end the paragraph.The third paragraph begins with t he author’s title and last name (e.g., Dr. Smith, Prof. Jones, Mr. Kajor, Ms. Hunter). List any memberships in professional societies other than the IEEE. Finally, list any awards and work for IEEE committees and publications. If a photograph is provided, the biography will be indented around it. The photograph is placed at the top left of the biography. Personal hobbies will be deleted from the biography.。

IEEE 标准论文格式

INFORMATION FOR IEEE TRANSACTIONS, JOURNALS,AND LETTERS AUTHORSTable of ContentsI.IEEE Author Rights and Responsibilities (1)A.Author ResponsibilitiesB.RightsC.IEEE CopyrightII.A General Overview:Steps to Publishing in an IEEE Scholarly Publication (2)A.Initial DecisionsB.FormatsC.Peer ReviewD.Final AcceptanceE.Preparation of Electronic and Final ManuscriptsF.Author ProofsG.Reprint RequestsH.Printed IssueI.No ReturnsIII.Submission Procedures for Peer Review (3)A.Transactions,Journals,and LettersB.Proceedings of the IEEEIV.General Manuscript Preparation (4)A.Consecutive Numbering of PartsB.Manuscript FormatsC.AbstractD.ReferencesE.References—Electronic SourcesF.Figures,Tables,and Captions ListG.Section HeadingsH.Mathematical NotationI.Units and AbbreviationsV.Final Preparation for Publication (6)A.Electronic Disk PreparationB.E-Mail PreparationC.Graphics PreparationD.Author Supplied Electronic GraphicsE.ProofsVI.Reprints and Page Charges (7)A.Page ChargesB.Mandatory and Overlength Page ChargesC.Ordering ReprintsD.Billing/Ordering Information for Authors and Purchasing DepartmentsAppendix I.Table of Units and Quantity Symbols.................................A1 Appendix II.Some Common Acronyms and Abbreviations...........................A9 Appendix III.List of IEEE Transactions,Journals,and Letters.........................A13 Appendix IV.List of IEEE Magazines.......................................A16Information for IEEE Transactions, Journals,and Letters AuthorsI.IEEE A UTHOR R IGHTS ANDR ESPONSIBILITIESA.Author ResponsibilitiesA manuscript submitted for publication to IEEE Transac-tions,Journals,Letters,or to the P ROCEEDINGS OF THE IEEE should be original work submitted to a single IEEE Journal. It should not have been previously published and should not be under consideration for publication elsewhere.The IEEE assumes that material submitted to its publications is properly available for general dissemination for the reader-ship of those publications.It is the responsibility of the authors, not the IEEE,to determine whether disclosure of their material requires the prior consent of other parties and,if so,to obtain it.If an author uses charts,photographs,or other graphics from previously printed material,he/she is responsible for obtaining written permission from the publisher to use the material in his/her manuscript.Statements and opinions given in work published by the IEEE are the expressions of the authors.Responsibility for the contents of published papers rests upon the authors,not the IEEE.B.RightsOccasionally an author may disagree with the referees’recommendations and with the editorial decision based on those comments.In such a case,the author shall be given the opportunity to prepare a suitably worded rebuttal to the referees’criticism and to submit the rebuttal to the Editor-in-Chief.Technical disagreements often occur in such instances because the manuscript is interpreted differently by the referee than is the intended interpretation of the author.Rebuttals can correct such erroneous interpretations.In any case,the Editor-in-Chief forwards the rebuttals to the referees for their comments,acting as an intermediary to continue to preserve the referees’anonymity.The referees return their recom-mendations if the argument put forth is persuasive.On the other hand,the referee is free to counter the rebuttal of the author.However the referee chooses to act,he or she furnishes additional information to the Editor-in-Chief which,together with the rebuttal of the author,provides the Editor-in-Chief with additional information on which to base a decision. The Editor-in-Chief may seek advice from additional referees during such an exchange.It is understood that such occasional lengthy exchanges will require an extension to the deadline for theﬁnal decision of the submission beyond the90-day requirement.The author should be so informed.The editorial policy of an IEEE publication is to be deter-mined by the entity that sponsors or controls the publication, within the framework and policies set by the IEEE Publications Board and the IEEE Board of Directors.Implementation of these policies is the responsibility of the Editor-in-Chief of the publication.The Editor-in-Chief is,in general,theﬁnal authority on matters of content and appropriateness of material in the publication.Disputes that arise over review or accep-tance of the material submitted for publication are expected to be resolved by the Editorial Board of the publication.In the event of a challenge to the review or publishing process that cannot be resolved at the sponsoring entity level, the Vice President of Publication Services and Products shall, within30days of receipt of written complaint,determine whether the dispute merits a formal arbitration process.For arbitration,the Vice President shall appoint an individual who will,through consultation with parties to the dispute and with the assistance of knowledgeable members of the professional community,assess the merits of the dispute and recommend a resolution.The recommendation will be presented to the Publications Board within120days of the receipt of the complaint,unless a time extension is granted by the Vice President of Publication Services and Products.The decision on the matter will then be made by the Vice President of Publication Services and Products and is binding on the IEEE entity that is a party to the dispute.C.IEEE CopyrightThe IEEE Intellectual Properties Department will process all permission requests and will monitor and report on electronic reuses of IEEE-copyrighted material relative to the proposed policies described here.The procedures outlined below will enable the department to carry out these responsibilities. For additional information,inqueries may be e-mailed to copyrights@.A completed IEEE Copyright Form should accompany any original material when it isﬁrst submitted to an IEEE technical periodical or conference publication.In any event,an author must transfer copyright to IEEE upon being notiﬁed of the acceptance of his/her paper if the transfer has not been done prior to acceptance.IEEE will not insist on a transfer of copyright rights(other than a license to print,reprint,and distribute)in any computer programs set out in the text of the material.The following copyright notice must be displayed on the ﬁrst page of any paper copy reproduction of IEEE-copyrighted material or on the initial screen displaying IEEE-copyrighted material electronically:1Personal use of this material is permitted.However,per-mission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.Paper Copy Preprints:A paper(hard)copy preprint may be an article that an author and/or company wishes to distrib-ute,but that either1)has been only recently submitted for review or2)has been reviewed and accepted but not yet published. Paper copy preprints must carry the following notice on the ﬁrst page of the reproduction:This work has been submitted to the IEEE for possible publication.Copyright may be transferred without notice, after which this version will be superseded.Electronic Preprints:Upon submitting an article to the IEEE for review and possible publication,the author must add the following notice to theﬁrst screen of any of his/her posted electronic preprint versions of the paper:This work has been submitted to the IEEE for possible publication.Copyright may be transferred without notice, after which this version may no longer be accessible. When the IEEE accepts the work for publication,the author must add the IEEE copyright notice to any previously posted electronic versions of the particular paper submitted and provide IEEE with the electronic address(URL,ftp address, etc.)of the primary electronic posting.When IEEE publishes the work,the author must replace the previous electronic version of the accepted paper with either1)the full citation to the IEEE work or2)the IEEE published version,including the IEEE copy-right notice and full citation.Prior or revised versions of the paper must not be represented as the published version.Collected Works:IEEE copyrighted collected works,such as conference proceedings(full text and/or abstracts)and collections of published papers(including collections dis-tributed from a single server or created through a collection of pointers or hyperlinks that refer to versions posted by IEEE authors),may not be posted for electronic distribution without prior written permission from IEEE.Such permission will be contingent upon the placement of prominently displayed copyright and reuse notices.Another condition in granting permission will be that the posted collected work include a monitoring mechanism for authorizing access to the material and for the reporting of usage data.Personal Servers:Authors and/or their companies shall have the right to post their IEEE-copyrighted material on their own servers without permission,provided that the server displays a prominent notice alerting readers to their obligations with respect to copyrighted material and that the posted work includes the IEEE copyright notice as shown in Section I-C above.An example of an acceptable notice is:This material is presented to ensure timely dissemination of scholarly and technical work.Copyright and all rightstherein are retained by authors or by other copyright hold-ers.All persons copying this information are expectedto adhere to the terms and constraints invoked by eachauthor’s copyright.In most cases,these works may not bereposted without the explicit permission of the copyrightholder.Classroom Use:Instructors are free to post their own IEEE-copyrighted papers on their institution’s servers,provided that appropriate copyright,credit,and reuse notices appear promi-nently with the posted material.Other electronic distribution of IEEE-copyrighted works on university servers may be done only with prior written permission from the IEEE.After IEEE accepts the work for publication and the copy-right has been transferred,IEEE will not allow changes or revisions to the work without further review and approval.The IEEE and many afﬁliated societies provide publication and society information via Internet servers.Links to society servers are encouraged,and prior consent is not required.II.A G ENERAL O VERVIEW:S TEPSTO P UBLISHING IN AN IEEES CHOLARLY P UBLICATIONA.Initial DecisionsIEEE Transactions,Journals,and Letters are published by the individual societies within the IEEE representing the vari-ousﬁelds of engineering interest.Each society/publication has its own requirements and procedures for peer review,theﬁrst step towards publication of a paper.Individual publications often give details on how the manuscript should be prepared for peer review on one of their covers.Papers submitted for publication in the IEEE Transactions, Journals,and Letters are generally to be sent directly to the Editor(s)-in-Chief,although some publications prefer that papers be delivered through a support ofﬁce at a different location.The names and addresses of the EICs and support ofﬁces can be found on the inside covers of the publications or at /organizations/pubs/guide.html.The P ROCEEDINGS OF THE IEEE is an IEEE general spon-sored publication with paid subscription.It does not represent one particularﬁeld of engineering interest as in Transactions, Journals,and Letters.Therefore,its manuscripts are reviewed with different criteria,but follow the same general publishing procedures(or criteria)of an IEEE society-sponsored publi-cation.It is the responsibility of authors who either:1)are U.S.nationals(including green card holders);2)work for a U.S.-based organization,regardless of where they are physically located;or3)work at a U.S.location of a non-U.S.-based organization,to ensure that papers submitted for publication do not violate the U.S.International Trafﬁc In Arms Regulation(ITAR).ITAR oversees articles and services covered by the U.S.Munitions rmation in the public domain is outside the purview of ITAR. (Note:Company information that is proprietary is not considered to be in the public domain.)Authors submitting papers based on defense-related contracts should be sure to 2adhere to any and all information-release clauses in those contracts.IEEE assumes that meeting government contract obligations satisﬁes the requirements of ITAR compliance. Periodicals editors should be sure to make mention of these responsibilities when soliciting submissions.Detailed information on ITAR(including the U.S.Munitions List) can be found on-line at /WebITAR.pdf. Additional information can also be found at /organizations/tab/export_compliance.html.For assistance with this issue,e-mail itar@.B.FormatsIEEE Transactions generally contain major manuscripts approximately8to10printed pages or24to30double-spaced pages.IEEE Journals follow the same length criteria as Trans-actions,but often are focused on selected topics and more specialized areas of interest.IEEE Letters are generally short papers of approximately three to four printed pages or nine double-spaced pages. C.Peer ReviewAfter the Editor/Editor-in-Chief of a publication determines that a paper is suitable for his/her publication,it will be forwarded to a group of reviewers selected for their expertise in a givenﬁeld.During this process,an author is often asked to expand, rewrite,or explain further the content of his/her paper.It is not uncommon that an author is asked to provide another draft with the suggested changes for further review.D.Final AcceptanceOnce a manuscript has received theﬁnal approval of the reviewers and Editor-in-Chief,the author will be notiﬁed and sent an IEEE Copyright Form.He/she will be asked to prepare the manuscript forﬁnal electronic publication and to possibly complete an additional information form.(See details in following sections.)E.Preparation of Electronic and Final ManuscriptsThe author will need to check the electronic guidelines on ﬁnal preparation for production of manuscripts and graphics.Note:A manuscript cannot enter theﬁnal production process at IEEE unless a copyright form has been signed and forwarded with the manuscript.If an author’s disk or e-mailed manuscript cannot be pro-cessed due to technical difﬁculties,he/she will be notiﬁed by the IEEE Transactions/Journals Department and asked to provide another copy.If the author’s graphics are not reproducible,he/she will be contacted by the IEEE Transactions/Journals Department and asked to provide a new set of graphics for the manuscript or to sign a disclaimer.If an author cannot provide an electronic version of the manuscript,arrangements can be made to handle a paper copy version.F.Author ProofsThe author will receive aﬁnal proof of his/her manuscript as it will appear in the printed publication.The proofs are usually accompanied by the IEEE Page Charges and Reprint Order Form dependent upon a society’s requirements for its publication.In a case where an author has four-color graphics,the society may require that the author pay the extra charges and he/she will be notiﬁed of that charge.The author is requested to provide corrections to theﬁnal proof of his/her paper within a few days after receipt of the author proofs.G.Reprint RequestsAt the time the author receives theﬁnal proofs of his/her paper,he/she should also receive an IEEE Page Charges and Reprint Order Form.This should be completed and returned with the proofs or sent directly to the IEEE Reprints Department,445Hoes Lane,P.O.Box1331,Piscataway,NJ 08855-1331USA;fax:+17329818062.H.Printed IssueOnce the issue of a publication has been printed,a compli-mentary copy will be sent to the author.If an author has requested reprints,these will be sent separately after the issue has been mailed.I.No ReturnsThe IEEE does not return disks,graphics,photographs,or paper copies of the manuscripts used in the production process of its issues.III.S UBMISSION P ROCEDURESFOR P EER R EVIEWA.Transactions,Journals,and LettersPapers submitted for publication in the IEEE Transactions, Journals,and Letters are generally to be sent directly to the Editor(s)-in-Chief,although some publications prefer that papers be delivered through a support ofﬁce at a different location.The names and addresses of the EICs and support ofﬁces can be found on the inside covers of the publications or at /organizations/pubs/guide.html.Also found on the inside covers or in the ending pages of the publications are instructions on how to prepare the manuscript for Peer Review.General manuscript preparation procedures can be found in Section IV.B.Proceedings of the IEEEThe P ROCEEDINGS OF THE IEEE publishes comprehensive, in-depth review,tutorial,and survey papers for technically knowledgeable readers who are not necessarily specialists in the subjects being treated.The papers are of long-range interest and broad signiﬁcance.Applications and technolog-ical issues,as well as theory,are emphasized.The topics 3include all aspects of electrical and computer engineering and science.From time to time,papers on managerial,histori-cal,economic,and ethical aspects of technology are pub-lished.Papers are authored by recognized authorities and reviewed by experts.They include extensive introductions written at a level suitable for the nonspecialist,with ample references for those who wish to probe further.Several issues a year are devoted to a single subject of special impor-tance.Prospective authors,before preparing a full-length manu-script,are urged to submit a proposal containing a description of the topic and its importance to P ROCEEDINGS readers,a detailed outline of the proposed paper and its type of coverage, and a brief biography showing the authors’qualiﬁcations for writing the paper.A proposal can be reviewed most efﬁciently if it is sent electronically to the Managing Editor at j.calder@.If the proposal receives a favorable review,the author will be encouraged to prepare the pa-per for publication consideration through the normal review process.P ROCEEDINGS OF THE IEEE445Hoes LaneP.O.Box1331Piscataway,NJ08855-1331USAFax:+17325625456IV.G ENERAL M ANUSCRIPT P REPARATION A.Consecutive Numbering of PartsAll manuscript pages,footnotes,equations,and references should be labeled in consecutive numerical order.Illustrations and tables should be cited in text in numerical order.See Section IV-G of this guide.B.Manuscript FormatsSee copies of the publications for examples of proper paper formats and requirements for the types of papers accepted for each publication(i.e.,Full Papers,Letters,Short Papers,etc.). Full length papers generally consist of the title,byline, author afﬁliation,footnote(including anyﬁnancial support ac-knowledgment),index terms,abstract,nomenclature if present, introduction,body,conclusions,reference list,list ofﬁgures and table captions,and originalﬁgures and tables for repro-duction.A paper may also include appendixes,a glossary of symbols,and an acknowledgment of nonﬁnancial support. C.AbstractThe abstract should be limited to50–200words and should concisely state what was done,how it was done,principal results,and their signiﬁcance.The abstract will appear later in various abstracts journals and should contain the most critical information of the paper.D.ReferencesA numbered list of references must be provided at the end of the paper.The list should be arranged in the order of citationin text,not in alphabetical order.List only one reference per reference number.Each reference number should be enclosed by square brack-ets.In text,citations of references may be given simply as“in [1]...”,rather than as“in reference[1]...”.Similarly,it is not necessary to mention the authors of a reference unless the mention is relevant to the text.It is almost never useful to give dates of references in text.These will usually be deleted by Staff Editors if included.Footnotes or other words and phrases that are not part of the reference format do not belong on the reference list.Phrases such as“For example,”should not introduce references in the list,but should instead be given in parentheses in text,followed by the reference number,i.e.,“For example,see[5].”Sample correct formats for various types of references are as follows.Books:[1]G.O.Young,“Synthetic structure of industrial plastics,”in Plastics,2nd ed.,vol.3,J.Peters,Ed.New York:McGraw-Hill,1964,pp.15–64.[2]W.-K.Chen,Linear Networks and Systems.Belmont,CA:Wadsworth,1993,pp.123–135.Periodicals:[3]J.U.Duncombe,“Infrared navigation—Part I:An assess-ment of feasibility,”IEEE Trans.Electron Devices,vol.ED-11,pp.34–39,Jan.1959.[4]E.P.Wigner,“Theory of traveling-wave optical laser,”Phys.Rev.,vol.134,pp.A635–A646,Dec.1965. [5]ler,“A note on reﬂector arrays,”IEEE Trans.Antennas Propagat.,to be published.Articles from Conference Proceedings(published):[6]D.B.Payne and J.R.Stern,“Wavelength-switched pas-sively coupled single-mode optical network,”in Proc.IOOC-ECOC,1985,pp.585–590.Papers Presented at Conferences(unpublished):[7]D.Ebehard and E.V oges,“Digital single sideband detec-tion for interferometric sensors,”presented at the2nd Int.Conf.Optical Fiber Sensors,Stuttgart,Germany,1984.Standards/Patents:[8]G.Brandli and M.Dick,“Alternating current fed powersupply,”U.S.Patent4084217,Nov.4,1978.Technical Reports:[9]E.E.Reber,R.L.Mitchell,and C.J.Carter,“Oxygenabsorption in the Earth’s atmosphere,”Aerospace Corp.,Los Angeles,CA,Tech.Rep.TR-0200(4230-46)-3,Nov.1968.E.References—Electronic SourcesThe guidelines for citing electronic information as offered below are a modiﬁed illustration of the adaptation by the International Standards Organization(ISO)documentation sys-tem and the American Psychological Association(APA)style. Three pieces of information are required to complete each reference:1)protocol or service;2)location where the item 4is to be found;and3)item to be retrieved.It is not necessary to repeat the protocol(i.e.,http)in Web addresses after “Available”since that is stated in the URL.Books:Author.(year,month day).Title.(edition)[Type of medium].volume(issue).Available:site/path/ﬁle Example:[1]J.Jones.(1991,May10).Networks.(2nd ed.)[Online].Available:Journals:Author.(year,month).Title.Journal.[Type of medium].volume(issue),pages.Available:site/path/ﬁle Example:[2]R.J.Vidmar.(1992,Aug.).On the use of atmosphericplasmas as electromagnetic reﬂectors.IEEE Trans.Plasma Sci.[Online].21(3),pp.876–880.Available: /pub/journals/21ps03-vidmar Papers Presented at Conferences:Author.(year,month). Title.Presented at Conference title.[Type of Medium]. Available:site/path/ﬁleExample:[3]PROCESS Corp.,MA.Intranets:Internet technologiesdeployed behind theﬁrewall for corporate productivity.Presented at INET96Annu.Meeting.[Online].Available: /Intranets/wp2.htpReports and Handbooks:Author.(year,month).Title. Company.City,State or Country.[Type of Medium]. Available:site/path/ﬁleExample:[4]S.L.Talleen.(1996,Apr.).The Intranet Ar-chitecture:Managing information in the new paradigm.Amdahl Corp.,CA.[Online].Available: /doc/products/bsg/intra/infra/html Computer Programs and Electronic Documents:ISO rec-ommends that capitalization follow the accepted practice for the language or script in which the information is given. Example:[5]A.Harriman.(1993,June).Compendium of genealog-ical software.Humanist.[Online].Available e-mail: HUMANIST@NYVM Message:get GENEALOGY REPORTF.Figures,Tables,and Captions ListAll graphics should be submitted as separate items from the body of your paper on separate sheets of paper or on disk.IEEE Transactions/Journals Department does not provide drafting or art services.Thus,the better the quality of the material submitted,the better the published result.Line art,graphs,charts,tables,drawings,photos,and gray-scale diagrams will be scanned electronically forﬁnal produc-tion or you may submit them as TIFF,PostScript,or Encap-sulated PostScriptﬁles(see Section V-D for more information on electronic graphics).If submitting for scanning,all graph-ics should be original proofs and not photocopies.Detailed instructions on the preparation of electronic graphics maybe found at /organizations/pubs/transactions/eic-guide.pdf.Whenever possible photos should be glossy prints with no ser prints will not reproduce as well as original photos.All line drawings and photos should be in black and white,unless special arrangements have been made to process them in color.If color is to be reproduced,the author must agree to accept responsibility for payment of the costs for separations and printing before any processing is performed.The author must provide a method of payment as well,either through their organization or by credit card.The current cost for color reproduction is aﬂat printing fee of US$1,045.00plus US$125.00per piece of color artwork.(Please note that this cost does not include the ordering of reprints.)Please use consistent typefaces on all yourﬁgures.Figures will be reduced to make the smallest typesize8points. Generally one or two typefaces should sufﬁce.It is suggested that you use either Times Roman or Sans Serif.For best results, all of yourﬁgures should be the same size(width length) whenever possible.For scanned graphics the original material should be no larger than2228cm.On graphs,show only the coordinate axes,or at most the major grid lines,to avoid a dense result after reduction.DO NOT put boxes around yourﬁgures to enclose them.Captions should be included as a separate list at the end of the paper.Corrections cannot be made on a graphic.New corrected copies(including tables)must be submitted by the author when returning the proofs.G.Section HeadingsPrimary section headings within papers are enumerated by Roman numerals and are centered above the text.For the purpose of typing the manuscript only,primary headings should be capital letters.Sample:I.PRIMARY HEADING(TEXT)Secondary section headings are enumerated by capital letters followed by periods(“A.”,“B.”,etc.)and areﬂush left above their sections.Theﬁrst letter of each word is capitalized.In print the headings will be in italics.Sample:A.Secondary Heading(TEXT)Tertiary section headings are enumerated by Arabic numer-als followed by a parenthesis.They are indented,run into the text in their sections,and are followed by a colon.Theﬁrst letter of each important word is capitalized.Sample:1)Tertiary Heading:(TEXT)Quaternary section headings are rarely necessary but are perfectly acceptable if required.They are identical to tertiary headings except that lowercase letters are used as labels and only theﬁrst letter of the heading is capitalized.Sample:5a)Quaternary heading:(TEXT)Enumeration of section headings is often desirable,but is not a requirement.If an author does choose to enumerate section headings,then ALL levels of section headings in the paper should be enumerated.Similarly,if section headings are not to be enumerated,the choice should be consistent for all headings in the paper.In either case,the remaining style rules for each level of section heading should be followed.H.Mathematical NotationTo avoid errors in editing and typesetting,authors should clearly identify subscripts,superscripts,Greek letters,and other symbols.Add margin notes or other explanations wher-ever necessary.It is especially important to distinguish clearly between the following terms.a)Capital and lowercase letters when used as symbols.b)Zero and the letter “O.”c)The lowercase letter “l,”and numeral one (1),and the prime sign ().d)The letters “k”and (kappa),“u”and (mu),“v”and(nu),and “n”and (eta).A wavy line under a character or letter indicates boldface type.(Bold type should be indicated for certain vectors and matrices.)A straight line under a character or letter indicates italic type.(Italic type should be indicated for all text variables.)Break equations to ﬁt in a space no wider than 21picas or3.5″in width.Avoid ambiguities in equations and fractions in text through careful use of parentheses,brackets,solidi (slants),etc.Note that in text,fractions are usually “broken down”to ﬁt on one line and confusion can result if terms are not properly labeled.The conventional order of brackets is {[()]}.IEEE Transactions style dictates that the only punctuation used at the end of a displayed equation is a period.There is,however,other punctuation permitted in the equation itself and between an equation and its condition;there is a comma and 2em space before the condition.For simplicity in international usage,IEEE practice is to separate numbers of more than four digits into groups of three on either side of the decimal point,separated by a space.If the magnitude of a number is less than one,the decimal sign should be preceded by a zero.Examples:1253174659.21630.102834Use of the multidot ()rather than themulti when multiplying by powers of ten in equations or text is at the author’s discretion.I.Units and Abbreviations The International System of Units (SI units)is advocated for use in IEEE publications.Refer to the units list provided in Appendix I of this guide for information on preferred usage of units,conversion factors,etc.Unit symbols should be used with measured quantities,i.e.,1mm,but not when unit names are used in text withoutquantities,i.e.,“a few millimeters.”Acronyms and abbreviations should be deﬁned the ﬁrst time they are used in text.A list of acronyms and abbreviations,including those that need not be deﬁned,is given in Appendix II of this guide.V.F INAL P REPARATION FOR P UBLICATION A.Electronic Disk Preparation The IEEE requests that all authors submit their ﬁnal man-uscripts in electronic and hard copy (two copies)form.How-ever,considering the myriad of word processors on the market (public domain included)and disk formats available through-out the world,the following guidelines and suggestions have been set forth in an effort to expedite the production process.General Guidelines:The following is a list of general guidelines for the submission of electronic media by prospec-tive authors.•The operating system and word processing software used to produce your document should be noted on your disk or e-mail (e.g.,DOS/Word).In the case of UNIX media,the method of extraction (i.e.,tar,bar,restore,etc.)should also be noted.•PostScript and Acrobat PDF ﬁles are not acceptable because the ﬁles are simply pictures of the pages and cannot be edited.•Disks should be labeled with ﬁle name(s)relating to the manuscript.•Check that your ﬁles are complete.Include:abstract,index terms,text,references,footnotes,biographies,and ﬁgure captions.•The hardcopy should exactly match its companion disk.Any changes made to your ﬁles should be reﬂected on the manuscript.•No program ﬁles should be included on the disk.•Graphics should be on a disk separate from the text as graphics and text are processed separately and graphics cannot be extracted from the text.•Include a ﬂat ASCII version on the disk with the word-processor version,if possible.•Please package disks in such a way as to minimize possible damage in the mail.•Try to adhere to the accepted style of the Transac-tions/Journal as much as possible.Of particular impor-tance here is the reference list.Please try to follow the format as described in Section IV-E and IV-F of thisdocument.Preferred Formats:For the most accurate and efﬁcient transferral of your manuscript,especially thosecontaining extensive mathematics,use T E X or LA T E X programs.An IEEE L A T E X style ﬁle can be found at /portal/pages/pubs/transactions/stylesheets.html .The following points are important to remember when submitting electronic manuscripts (compuscripts)in T E X or LA T E X.•Please include all macros or deﬁnitions that are required to produce your document,references,biographies,index terms,etc.,in one ﬁle.6。

ieee英文论文格式.doc

ieee论文格式要求应用中文版格式

ieee论文格式要求应用中文版格式一、封面题目：小二号黑体加粗居中。

各项内容：四号宋体居中。

章节条目：五号宋体。

行距：单倍行距。

三、论文题目：小一号黑体加粗居中。

四、中文摘要1、摘要：小二号黑体加粗居中。

2、摘要内容字体：小四号宋体。

3、字数：300字左右。

4、行距：20磅5、关键词：四号宋体，加粗。

词3-5个，每个词间空一格。

五、英文摘要1、ABSTRACT：小二号TimesNewRoman.2、内容字体：小四号TimesNewRoman.3、单倍行距。

4、Keywords：四号加粗。

词3-5个，小四号TimesNewRoman.词间空一格。

六、绪论小二号黑体加粗居中。

内容500字左右，小四号宋体，行距：20磅七、正文(一)正文用小四号宋体章：标题小二号黑体，加粗，居中。

节：标题小三号黑体，加粗，居中。

一级标题序号如：一、二、三、标题四号黑体，加粗，顶格。

二级标题序号如：(一)(二)(三)标题小四号宋体，不加粗，顶格。

三级标题序号如：1.2.3.标题小四号宋体，不加粗，缩进二个字。

四级标题序号如：(1)(2)(3)标题小四号宋体，不加粗，缩进二个字。

五级标题序号如：①②③标题小四号宋体，不加粗，缩进二个字。

(三)表格每个表格应有自己的表序和表题，表序和表题应写在表格上方正中。

表序后空一格书写表题。

表格允许下页接续写，表题可省略，表头应重复写，并在右上方写“续表××”。

(四)插图(五)论文中的图、表、公式、算式等，一律用阿拉伯数字分别依序连编编排序号。

序号分章依序编码，其标注形式应便于互相区别，可分别为：图2.1、表3.2、公式(3.5)等。

文中的阿拉伯数字一律用半角标示。

八、结束语小二号黑体加粗居中。

内容300字左右，小四号宋体，行距：20磅。

九、致谢小二号黑体加粗居中。

内容小四号宋体，行距：20磅十、参考文献(一)小二号黑体加粗居中。

内容8—10篇，五号宋体，行距：20磅。

IEEE会议论文格式

Abstract—These instructions give you guidelines for preparing papers for the ICSGCE/IEEE conference. Use this document as a template by using Microsoft Word 6.0 or later. Otherwise, use this document as an instruction set. P lease use this document as a “template” to prepare your manuscript. For submission guidelines, follow the instructions on paper submission on /. Do not delete the blank line immediately above the abstract; it sets the footnote at the bottom of this column.Keywords-Component; formatting; style; styling; insertI.IntroductionThese guidelines include complete descriptions of the fonts, line spacing, margins, column widths, and related information for producing your manuscripts. If you are reading the ICSGCE-Template.doc, please save to your own conference directory for later use. Please follow them and if you have any questions, direct them to Publication Chair at ********************* or *********************.II.Procedure for Paper SubmissionA.Manuscript PreparingWhen you are preparing your manuscript, open the ICSGCE-Template.doc and rename it into yourown.doc. Then type over sections directly in the template, or simply cut and paste from another document and then format them by means of format paintbrush. Use italics for emphasis; do not underline. Do not change the font sizes, margins, column widths or line spacing to squeeze more text into a limited number of pages.You are also advised to follow the Manuscript received April 10, 2011. (Write the date on which you submitted your paper for review.) This work was supported in part by the U.S. Department of Commerce under Grant BS123456 (sponsor and financial support acknowledgment goes here). Paper titles should be written in uppercase and lowercase letters, not all uppercase. Avoid writing long formulas with subscripts in the title; short formulas that identify the elements are fine (e.g., "Nd–Fe–B"). Full names of authors are preferred in the author field, but are not required. Put a space between authors' initials.F. A. Author is with the National Institute of Standards and Technology, Boulder, CO 80305 USA (corresponding author to provide phone: 303-555-5555;fax:303-555-5555;e-mail:*******************.gov).S. B. Author, Jr. is with the Department of Physics, Colorado State University, Fort Collins, CO 80523 USA (e-mail: author@lamar. ).T. C. Author is with the Electrical Engineering Department, University of Colorado,Boulder,CO80309USA(e-mail:**************.jp).instructions on paper formatting on /. All manuscripts must be prepared in English.B.Paper SubmissionWhen you submit your manuscript, follow the instructions on paper submission on /and submit your papers online or via Email.Also send a Registration Form with complete contact information for all authors. Include full mailing addresses, telephone numbers, and e-mail addresses. In addition, designate one author as the “corresponding author.” This is the author to whom the notification of acceptance with revising requirements of the paper will be sent. The notification of acceptance is sent to the corresponding author only.C.Copyright FormAn ICSGCE/IEEE copyright form should accompany your final submission. These will be custom generated for you at the submission time. Authors are responsible for obtaining any security clearances.III.MathAll mathematical expressions must be legible. It is required to create equations or variables in your manuscript by the MathType. Size setting of equations is as follows:Full 10ptSubscript 7ptSub-subscript 6ptSymbol 12ptSub-symbol 8ptNumber equations consecutively with equation numbers in parentheses flush with the right margin, as in (1). To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Use parentheses to avoid ambiguities in denominators. Punctuate equations when they are part of a sentence, as in220(,)/[/(2)]rF r dr d rϕϕσμ=⎰1120exp(||)()()j i iz z J r J r dλλλλλ∞-⨯--⎰ (1)Be sure that the symbols in your equation have been defined before the equation appears or immediately following.Refer to “(1),” not “Eq. (1)” or “equation (1),” except at the beginning of a sentence: “Equation (1) is ...”.• Italicize general variables (T might refer to temperature,Template for Preparation of Papers for ICSGCE/IEEE Conferences First A. Author, Second B. Author, Jr., and Third C. Author, Member, IEEEbut T is the unit tesla).• Denote vectors and matrices in bold but not italic Times New Roman.• Express derivatives as follows:2, not 2dx x b x x b dt=+=+ (2) • Half line spacing is suggested between the equation and its upper (lower) text as in (1) and (2).Do not give derivations that are easily found in the literature, merely cite the reference.IV. Figure and TableEach figure and table should have a caption to concisely and intelligibly illustrate the contents of it. Figures/tables may be worked into the text or placed at the end of the manuscript. To conserve space in the publication, most figures/tables are reduced to single-column width if possible. This may result in as much as a 4:1 reduction from the original. Therefore, figures/tables should be kept to a minimum in original and be easily viewed on published pages. Large figures and tables may span both columns.In the finalized sizes of figures/tables, authors are advised to make sure that (see Fig. 1):• All images/photographs will be published in black- and-white, so do not describe any of images/photographs with words such as red line, blue area, etc.• Graphing figures are recommended to generate in gray curves because some color lines will be not legible in black-and-white.• Lines in the figures are in 0.75 pounds and arrows in the minimum.• Mathematical expressions (variables) appearing in figures should be in the same styles as in texts (see Section III).• Trigram tables are suggested, as in Table 1, the first and the last lines are double lines and the 2nd line is in 0.75 pounds.• Texts in figures are approximately 8pt.• Captions of figures and tables are approximately 9pt. • Place figure captions below the figures, as in Fig. 1. • Place table titles above the tables, as in Table 1.The figures and tables are recommended to insert in your document after the text actually exists. Please do not include captions as part of the figures. Do not put captions in “t ext boxes” linked to the figures. Use the abbreviation “Fig.” even at the beginning of a sentence. Do not abbreviate “Tab.”. Tables are numbered with Arabic numerals.Table 1: The arrangement of channelsChannels Group 1 Group 2 … Group c Main channel Channel 1 Channel 2 … Channel c ………… …Fig. 1. Magnetization as a function of applied field. Note that “Fig.” is abbreviated. There is a period after the figure number, followed by two spaces. It is good practice to explain the significance of the figure in the caption. If your figure has two parts, include the labels “(a)” and “(b)” below the corresponding part of the figure. Then the figure caption should be “The significance of the figure: (a) the significance of (a) and (b) the significance of (b)”Figure axis labels are often a source of confusion. Use words rather than symbols. As an example, write the quantity “Magnetization,” or “Magnetization M ,” not just “M .” Put units in parentheses. Do not label axes only with units. As in Fig. 1, for example, write “Magnetization (A/m)” or “Magnetization (A ⋅m -1),” not just “A/m.” Do not label axes with a ratio of quantities and units. For example, write “Temperature (K),” not “Temperature/K.”Multipliers can be especially confusing. Write “Magnetization (kA/m)” or “Magnetization (103 A/m).” Do not write “Magnetization (A/m)⨯1000” because the reader would not know whether the top axis label in Fig. 1 meant 16000 A/m or 0.016 A/m.V. Helpful HintsEssentially, academic paper writing is as a form of problem-solving in which the writer, or the author, faces two main tasks: a) generating his academic ideas in language, and b) composing these ideas into a written structure to meet the need of readers and the requirements of the journal.Generally speaking, writing a good paper in English requires the mastery of various skills. It requires language basis, grammatical accuracy and readability, so that relationship between words and sentences are clear, and understanding between reader and writer is made easier. Additionally, it requires vocabulary appropriate to the subject matter and to the level and tone of the paper. Finally, of more importance, writing a good academic paper requires a careful and well-planned structuring of ideas.However, this Template is incapable to include everything you need to know to be a better writer. Given here are some useful language hints that should be an important part of resources for your paper writing. A. Formal Usages• Use one space after periods and colons.• Hyphenate complex modifiers: “zero -field-cooled magnetization.”• Prefixes such as “non,” “sub,” “micro,” “multi,” and“"ultra” are not independent words; they should be joined to the words they modify, usually without a hyphen.•Avoid dangling participles, such as, “Using (1), the potential was calculated.” [It is not clear who or what used (1).] Write instead, “The potential was calculated by using (1),” or “Using (1), we calculated the potential.”•A parenthetical statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.) •Avoid contractions; for example, write “do not” instead of “don’t.” The serial comma is preferred: “A, B, and C” instead of “A, B and C.”B.Some Common Mistakes•The word “data” is plural, not singular.•The word “alternatively” is preferred to the word “alternately” (unless you really mean something that alternates).• Use the wo rd “whereas” instead of “while” (unless you are referring to simultaneous events).•Do not use the word “issue”or “question”as a euphemism for “problem.”• Be aware of the different meanings of the homophones “affect” (usually a verb) and “effect” (usua lly a noun), “complement” and “compliment,” “discreet” and “discrete,” “principal” (e.g., “principal investigator”) and “principle”(e.g., “principle of measurement”). Do not confuse “imply” and “infer.”•There is no period after the “et” in the Latin ab breviation “et al.” (It is also italicized).•The abbreviation “i.e.,” means “that is,” and the abbreviation “e.g.,” means “for example” (these abbreviations are not italicized).C.Abbreviations and AcronymsDefine abbreviations and acronyms the first time they are used in the text, even after they have already been defined in the abstract. Abbreviations such as TCP/IP, ac, and dc do not have to be defined. Do not use abbreviations in the title unless they are unavoidable.The abbreviation for “seconds” is “s,” not “sec.”D.UnitsUse SI not CGS as primary units. Avoid combining SI and CGS units. This often leads to confusion because equations do not balance dimensionally. If you must use mixed units, clearly state the units for each quantity in an equation.•Use the center dot to separate compound units, e.g., “A·m2.”•Indicate sample dimensions as “0.1 cm ⨯0.2 cm,” not “0.1 ⨯ 0.2 cm2.”•When expressing a range of values, write “7 to 9”or “7-9”, not “7~9”.Remember that an excellent academic paper needs to be composed by authors in good language! Undeciphe- rable English is a valid reason for rejection! If your native language is not English, please get a colleague good at English or a native English-speaker to proofread your paper.VI.References and CitationsNumber citations consecutively in square brackets [1]. The sentence punctuation follows the brackets [2]. Multiple references [2], [3] are each numbered with separate brackets [1]–[3]. When citing a section in a book, please give the relevant page numbers [2]. In sentences, refer simply to the reference number, as in [3]. Do not use “Ref. [3]” or “reference [3]” except at the beginning of a sentence: “Reference [3] shows ... .” The conference cannot accept footnotes in its document; therefore, type the reference list at the end of the paper using the “References” stylePlease note that the references at the end of this document are in the preferred referencing style. Give all authors’ names; do not use “et al.” unless there are six authors or more. Use a space after authors' initials. Papers that have not been published should be cited as “unpublished” [4]. Papers that have been submitted for publication should be cited as “submitted for publication” [5]. Papers that have been accepted for publication, but not yet specified for an issue should be cited as “to be published” [6]. Please give affiliations and addresses for private communications [7]. Capitalize only the first word in a paper title, except for proper nouns and element symbols. For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [8].VII.ConclusionA conclusion section is not required. Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work or suggest applications and extensions.VIII.AppendixAppendixes, if needed, appear before the acknowledgment.IX.AcknowledgmentUse the singular heading even if you have many acknowledgments. Avoid expressions such as “One of us (S.B.A.) would like to thank ... .” Instead, write “F. A. Author thanks ... .” Sponsor and financial support acknowledgments are placed in the unnumbered footnote on the first page.References[1]G. O. Y oung, “Synthetic structure of industrial plastics (Book stylewith paper title and editor),” in Plastics, 2nd ed. vol. 3, J. Peters, Ed.New York: McGraw-Hill, 1964, pp. 15–64.[2]W.-K. Chen, Linear Networks and Systems (Book style).Belmont, CA:Wadsworth, 1993, pp. 123–135.[3] H. Poor, An Introduction to Signal Detection and Estimation. NewYork: Springer-Verlag, 1985, ch. 4.[4] B. Smith, “An approach to graphs of linear forms (Unpublished workstyle),” unpublished.[5] E. H. Miller, “A note on reflector arrays (Periodical style—Acceptedfor publication),” IEEE Trans. Antennas Propagat., to be published.[6]J. Wang, “Fundamentals of erbium-doped fiber amplifiers arrays(Periodical style—Submitted for publication),” IEEE J. QuantumElectron., submitted for publication.[7] C. J. Kaufman, Rocky Mountain Research Lab., Boulder, CO, privatecommunication, May 1995.[8]Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopystudies on magneto-optical media and plastic substrate interfaces(Translation Journals style),”IEEE Transl. J. Magn.Jpn., vol.2, Aug. 1987, pp. 740–741 [Dig. 9th Annu. Conf. Magnetics Japan, 1982, p. 301].[9]M. Young, The Techincal Writers l Valley, CA:University Science, 1989.[10]J. U. Duncombe, “Infrared navigation—Part I: An assessment offeasibility (Periodical style),” IEEE Trans. Electron Devices, vol.ED-11, pp. 34–39, Jan. 1959.[11]S. Chen, B. Mulgrew, and P. M. Grant, “A clustering technique fordigital communications channel equalization using radial basisfunction networks,” IEEE Trans. Neural Networks, vol. 4, pp. 570–578, July 1993.[12]R. W. Lucky, “Automatic equalization for digital communication,”Bell Syst. Tech. J., vol. 44, no. 4, pp. 547–588, Apr. 1965.[13]S. P. Bingulac, “On the compatibility of adaptive controllers (PublishedConference Proceedings style),” in Proc. 4th Annu. Allerton Conf.Circuits and Systems Theory, New York, 1994, pp. 8–16.[14]G. R. Faulhaber, “Design of service systems with priority reservation,”in Conf. Rec. 1995 IEEE Int. Conf. Communications, pp. 3–8. [15]W. D. Doyle, “Magnetization reversal in films with biaxial anisotropy,”in 1987 Proc. INTERMAG Conf., pp. 2.2-1–2.2-6.[16]G. W. Juette and L. E. Zeffanella, “Radio noise currents n short sectionson bundle conductors (Presented Conference Paper style),” presente d at the IEEE Summer power Meeting, Dallas, TX, June 22–27, 1990,Paper 90 SM 690-0 PWRS. [17]J. G. Kreifeldt, “An analysis of surface-detected EMG as anamplitude-modulated noise,” presented at the 1989 Int. Conf. Medicine and Biological Engineering, Chicago, IL.[18]J. Williams, “Narrow-band analyzer (Thesis or Dissertation style),”Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.[19]N. Kawasaki, “Parametric study of thermal and chemicalnonequilibrium nozzle flow,” M.S. thesis, Dept. Elec tron. Eng., Osaka Univ., Osaka, Japan, 1993.[20]J. P. Wilkinson, “Nonlinear resonant circuit devices (Patent style),”U.S. Patent 3 624 12, July 16, 1990.[21]IEEE Criteria for Class IE Electric Systems (Standards style), IEEEStandard 308, 1969.[22]Letter Symbols for Quantities, ANSI Standard Y10.5-1968.[23]R. E. Haskell and C. T. Case, “Transient signal propagation in losslessisotropic plasmas (Report style),” USAF Cambridge Res. Lab., Cambridge, MA Rep. ARCRL-66-234 (II), 1994, vol. 2.[24] E. E. Reber, R. L. Michell, a nd C. J. Carter, “Oxygen absorption in theEarth’s atmosphere,” Aerospace Corp., Los Angeles, CA, Tech. Rep.TR-0200 (420-46)-3, Nov. 1988.[25](Handbook style) Transmission Systems for Communications, 3rd ed.,Western Electric Co., Winston-Salem, NC, 1985, pp. 44–60.Motorola Semiconductor Data Manual,Motorola Semiconductor Products Inc., Phoenix, AZ, 1989.[26](Basic Book/Monograph Online Sources) J. K. Author. (year, month,day). Title (edition) [Type of medium]. Volume(issue). Available:http://www.(URL)[27]J. Jones. (1991, May 10). Networks (2nd ed.) [Online]. Available:[28](Journal Online Sources style) K. Author. (year, month). Title. Journal[Type of medium]. Volume(issue), paging if given. Available:http://www.(URL)[29]R. J. Vidmar. (1992, August). On the use of atmospheric plasmas aselectromagnetic reflectors. IEEE Trans. Plasma Sci. [Online]. 21(3).pp. 876—880. Available: /pub/journals/ 21ps03-vidmar。

IEEE英文论文格式模板

IEEE英文论文格式模板Title: A Template for IEEE Format of Research PapersAbstract:This sample paper serves as a template for authors looking to submit their research papers to the Institute of Electrical and Electronics Engineers (IEEE). The document includes guidelines for paper organization, citation style, andformatting instructions. By adhering to these instructions, authors can ensure their papers are well-structured and meet the requirements set forth by the IEEE.1. Introduction:In this section, briefly describe the topic of the research paper, provide context, and state the objectives andsignificance of the study. It is important to engage the readers and highlight the relevance of the research being conducted.2. Literature Review:3. Methodology:Explain the research design, methodology, and the techniques employed in the study. Clearly outline the steps followed in data collection, data analysis, and any experiments or simulations conducted. Provide enough detail for readers to replicate the study and assess its validity.4. Results and Discussion:5. Conclusion:Summarize the main findings of the study and link them back to the initial research objectives. Address any limitations or potential areas for further investigation. Emphasize the significance of the research and its potential impact.6. References:List all sources cited in the paper following the IEEE citation style. Ensure that each reference includes all necessary information, such as the author(s), title, source, volume, page numbers, and publication year. Use consistent formatting throughout the references section.7. Formatting Guidelines:Follow the formatting guidelines provided by the IEEE. Use a standard font, such as Times New Roman, with a font size of 10-12 points. Set page margins to 1 inch on all sides. Title of the paper should be in bold, centered, and in title case.8. Citations and References:Citations in the text should be indicated by numbers in square brackets, such as [1]. The corresponding reference number should be listed at the end of the paper, in the order they appear in the text. For example, [1] J. Doe et al., "Title of the Article," Journal Name, vol. 1, no. 1, pp. 1-10, Year.Conclusion:。

ieee format 英文paper格式

ieee format 英文paper格式
IEEE (Institute of Electrical and Electronics Engineers) 格式是一种常用的学术论文格式，尤其在电气工程和计算机科学领域。

以下是一个基本的IEEE英文论文格式模板：
Title Page
标题：简短、明确，反映论文主题。

作者：所有作者的全名和所属单位。

所属单位：作者的学校或工作单位。

摘要：简短地概括论文的主要内容和结果。

关键词：列出3-5个关键词，反映论文主题。

Main Body
1. Introduction
研究背景
研究目的和问题陈述
研究范围和限制
2. Related Work
回顾相关研究和背景知识
当前研究的起点和位置
3. Methodology
描述研究方法或技术路径
详细解释实验设计或实施过程
4. Results and Discussion
呈现实验结果或研究数据
结果分析和讨论
5. Conclusion
总结研究成果和发现
指出研究局限性和未来工作方向References
按照IEEE的引用格式列出所有参考的文献。

Appendix (可选)
提供额外的数据、图表或详细信息。

每个部分都有其特定的格式要求，例如标题、作者、页码等。

在撰写论文时，请确保遵循IEEE的格式指南，并使用适当的引用格式。

IEEE论文格式模板

IEEE论文格式模板以下是IEEE论文格式模板的示例：----------------------------------------------------------------------------------------------------------------------标题：题目摘要：在这里写下本篇论文的摘要，包括研究目的、方法、结果和结论。

关键词：关键词1；关键词2；关键词31.引言在引言部分，介绍本研究的背景和动机，并阐述本研究的目的和重要性。

同时，该部分还可以回顾文献、提供相关研究领域的背景知识，并总结已有研究的不足之处。

2.相关工作在相关工作部分，对于该领域的相关研究进行概述和评述。

可以列举已有研究的方法、结果和限制，并讨论与本研究的关系。

3.方法在方法部分，详细描述研究所使用的方法。

包括实验设计、数据采集和分析方法等。

确保其他研究人员能够重新复制该研究，并对实验结果进行验证。

4.结果与讨论在结果与讨论部分，描述研究的结果并进行讨论。

数据、图表和统计结果可以用于支持你的分析和结论。

本部分还可以与引言部分中提出的研究目的进行对比，探讨结果是否达到了预期的目标，并对结果进行解释。

5.结论在结论部分，简洁明了地总结研究的主要发现，并讨论这些发现对于该领域的影响和意义。

同时，也可以提出本研究的局限性和未来研究的方向。

致谢：在该部分可以感谢对该研究有帮助的人员或组织，并提供他们的支持和贡献。

----------------------------------------------------------------------------------------------------------------------以上是一个简单的IEEE论文格式模板。

在撰写自己的论文时，可以根据实际情况进行修改和调整，确保论文能够满足IEEE的格式要求并符合学术规范。

IEEE论文格式模板

Paper Title (use style: paper title)Subtitle as neededAuthors Name/s per 1st Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptableline 3: City, Countryline4:e-mail:************Authors Name/s per 2nd Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptableline 3: City, Countryline4:e-mail:************Abstract—This electronic document is a “live” template. T he various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. DO NOT USE SPECIAL CHARACTERS, SYMBOLS, OR MATH IN YOUR TITLE OR ABSTRACT. (Abstract)Keywords-component; formatting; style; styling; insert (key words)I.I NTRODUCTION (H EADING 1)All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at Conference Publishing Services (CPS): Phone +1 (714) 821-8380 or Fax +1 (714) 761-1784.This template provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. PLEASE DO NOT RE-ADJUST THESE MARGINS. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow.II.T YPE S TYLE AND F ONTSWherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in appearance to Times. Avoid using bit-mapped fonts if possible. True-Type 1 or Open Type fonts are preferred. Please embed symbol fonts, as well, for math, etc.III.E ASE OF U SEA.Selecting a Template (Heading 2)First, confirm that you have the correct template for your paper size. This template has been tailored for output on the US-letter paper size. If you are using A4-sized paper, please close this template and download the file for A4 paper format called “CPS_A4_format”.B.Maintaining the Integrity of the SpecificationsThe template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations.IV.P REPARE Y OUR P APER B EFORE S TYLING Before you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you.Finally, complete content and organizational editing before formatting. Please take note of the following items when proofreading spelling and grammar:A.Abbreviations and AcronymsDefine abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable.B.Units•Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units may be used assecondary units (in parentheses). An exceptionwould be the use of English units as identifiers intrade, such as “3.5-inch disk drive”.•Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This oftenleads to confusion because equations do not balancedimensionally. If you must use mixed units, clearlystate the units for each quantity that you use in anequation.•Do not mix complete spellings and abbreviations of units: “Wb/m2” or “webers per square meter”, not“webers/m2”. Spell out units when they appear intext: “. . . a few henries”, not “. . . a few H”.•Use a zero before dec imal points: “0.25”, not “.25”. C.EquationsThe equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your equation should be typed using either the Times New Roman or the Symbol font (please no other font). To create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.Number equations consecutively. Equation numbers, within parentheses, are to position flush right, as in (1), using a right tab stop. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols for quantities and variables, but not Greek symbols. Use a long dash rather than a hyphen for a minus sign. Punctuate equations with commas or periods when they are part of a sentence, as inα + β = χ. (1)Note that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or immediately following the equation. Use “(1)”, not “Eq. (1)” or “equation (1)”, except at the beginning of a sentence: “Equation (1) is . . .”D.Some Common Mistakes•The word “data” is plural, not singular.•The subscript for the permeability of vacuum μ0, and other common scientific constants, is zero withsubscript formatting, not a lowercase letter “o”.•In American English, commas, semi-/colons, periods, question and exclamation marks are located withinquotation marks only when a complete thought orname is cited, such as a title or full quotation. Whenquotation marks are used, instead of a bold or italictypeface, to highlight a word or phrase, punctuationshould appear outside of the quotation marks. Aparenthetical phrase or statement at the end of asentence is punctuated outside of the closingparenthesis (like this). (A parenthetical sentence ispunctuated within the parentheses.)• A graph within a graph is an “inset”, not an “insert”.The word alternatively is preferred to the word“alternately” (unless you really mean something thatalternates).•Do not use the word “essentially” to mean “approximately” or “effectively”.•In your paper title, if the words “that uses” can accurately replace the word “using”, capitalize the“u”; if not, keep using lower-cased.•Be aware of the different meanings of the homophones “affect” and “effect”, “complement”and “compliment”, “discreet” and “discrete”,“principal” and “principle”.•Do not confuse “imply” and “infer”.•The prefix “non” is not a word; it should be joined to the word it modifies, usually without a hyphen.•There is no period after the “et” in the Latin abbreviati on “et al.”.•The abbreviation “i.e.” means “that is”, and the abbreviation “e.g.” means “for example”.An excellent style manual for science writers is [7].V.U SING THE T EMPLATEAfter the text edit has been completed, the paper is ready for the template. Duplicate the template file by using the Save As command, and use the naming convention prescribed by your conference for the name of your paper. In this newly created file, highlight all of the contents and import your prepared text file. You are now ready to style your paper.A.Authors and AffiliationsThe template is designed so that author affiliations are not repeated each time for multiple authors of the same affiliation. Please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). This template was designed for two affiliations.1)For author/s of only one affiliation (Heading 3): To change the default, adjust the template as follows.a)Selection (Heading 4): Highlight all author and affiliation lines.b)Change number of columns: Select Format > Columns >Presets > One Column.c)Deletion: Delete the author and affiliation lines for the second affiliation.d)For author/s of more than two affiliations: To change the default, adjust the template as follows.e)Selection: Highlight all author and affiliation lines.f)Change number of columns: Select Format > Columns > Presets > One Column.g)Highlight author and affiliation lines of affiliation 1 and copy this selection.h)Formatting: Insert one hard return immediately after the last character of the last affiliation line. Then paste the copy of affiliation 1. Repeat as necessary for each additional affiliation.i)Reassign number of columns: Place your cursor to the right of the last character of the last affiliation line of an even numbered affiliation (e.g., if there are five affiliations, place your cursor at end of fourth affiliation). Drag the cursor up to highlight all of the above author and affiliation lines. Go to Format > Columns and select “2 Columns”. I f you have an odd number of affiliations, the final affiliation will be centered on the page; all previous will be in two columns.B.Identify the HeadingsHeadings, or heads, are organizational devices that guide the reader through your paper. There are two types: component heads and text heads.Component heads identify the different components of your paper and are not topically subordinate to each other. Examples include Acknowledgments and References and, for these, the correct style to use is “Heading5”. Use “figurecaption” for your Figure captions, and “table head” for your table title. Run-in heads, such as “Abstract”, will require you to apply a style (in this case, italic) in addition to the style provided by the drop down menu to differentiate the head from the text.Text heads organize the topics on a relational, hierarchical basis. For example, the paper title is the primary text head because all subsequent material relates and elaborates on this one topic. If there are two or more sub-topics, the next level head (uppercase Roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads should be introduced. Styles named “Heading 1”, “Heading 2”, “Heading 3”, and “Heading 4” are prescribed.C.Figures and Tables1)Positioning Figures and Tables: Place figures and tables at the top and bottom of columns. Avoid placing them in the middle of columns. Large figures and tables may span across both columns. Figure captions should be below the figures; table heads should appear above the tables. Insert figures and tables after they are cited in the text. Use the abbreviation “Fig. 1”, even at the beginning of a sentence.TABLE I. T ABLE T YPE S TYLESa. Sample of a Table footnote. (Table footnote)Figure 1. Example of a ONE-COLUMN figure caption.Please see last page of this document for AN EXAMPLE of a 2-COLUMN Figure.Figure Labels: Use 8 point Times New Roman for Figure labels. Use words rather than symbols or abbreviations when writing Figure axis labels to avoid confusing the reader. As an example, write the quantity “Magnetization”, or“Magnetization, M”, not just “M”. If including units in the label, present them within parentheses. Do not label axes only with units. In the example, write “Magnetization (A/m)” or “Magnetization {A[m(1)]}”, not just “A/m”. Do not label axes with a ratio of quantities and units. For example, write “Temperature (K)”, not “Temperature/K”. D.FootnotesUse footnotes sparingly (or not at all) and place them at the bottom of the column on the page on which they are referenced. Use Times 8-point type, single-spaced. To help your readers, avoid using footnotes altogether and include necessary peripheral observations in the text (within parentheses, if you prefer, as in this sentence).VI.C OPYRIGHT F ORMS AND R EPRINT O RDERS You must submit the IEEE Electronic Copyright Form (ECF) per Step 7 of the CPS author kit’s web page. THIS FORM MUST BE SUBMITTED IN ORDER TO PUBLISH YOUR PAPER.Please see Step 9 for ordering reprints of your paper. Reprints may be ordered using the form provided as <reprint.doc> or <reprint.pdf>.A CKNOWLEDGMENTThe preferred spelling of the word “acknowledgment” in America is without an “e” after the “g”. Avoid the stilted expression, “One of us (R.B.G.) thanks . . .” Instead, try “R.B.G. thanks”. Put applicable sponsor acknowledgments here; DO NOT place them on the first page of your paper or as a footnote.R EFERENCESList and number all bibliographical references in 9-point Times, single-spaced, at the end of your paper. When referenced in the text, enclose the citation number in square brackets, for example [1]. Where appropriate, include the name(s) of editors of referenced books. The template will number citations consecutively within brackets [1]. The sentence punctuation follows the bracket [2]. Refer simply to the reference number, as in [3]—do not use “Ref. [3]” or “reference [3]” except at the beginning of a sentence: “Reference [3] was the first. . .”Number footnotes separately in superscripts. Place the actual footnote at the bottom of the column in which it was cited. Do not put footnotes in the reference list. Use letters for table footnotes.Unless there are six authors or more give all authors’names; do not use “et al.”. Papers that have not been published, even if they have been submitted for publication,should be cited as “unpublished” [4]. Papers that have been accepted for publication should be cited as “in press” [5]. Capitalize only the first word in a paper title, except for proper nouns and element symbols.For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [6].[1]G. Eason, B. Noble, and I. N. Sned don, “On certain integrals ofLipschitz-Hankel type involving products of Bessel functions,” Phil.Trans. Roy. Soc. London, vol. A247, pp. 529–551, April 1955.(references)[2]J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed.,vol. 2. Oxford: Clarendon, 1892, pp.68–73.[3]I. S. Jacobs and C. P. Bean, “Fine particles, thin films and exchangeanisotropy,” in Magnetism, vol. III, G. T. Rado and H. Suhl, Eds.New York: Academic, 1963, pp. 271–350.[4]K. Elissa, “Title of paper if known,” unpublished.[5]R. Nicole, “Title of paper with only first word capitalized,” J. NameStand. Abbrev., in press.[6]Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electronspectroscopy studies on magneto-optical media and plastic substrate interface,” IEEE Transl. J. Magn. Japan, vol. 2, pp. 740–741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p. 301, 1982]. [7]M. Young, The Technical Writer’s Handbook. Mill Valley, CA:University Science, 1989.[8]Electronic Publication: Digital Object Identifiers (DOIs):Article in a journal:[9] D. Kornack and P. Rakic, “Cell Proliferation without Neurogenesis inAdult Primate Neocortex,” Science, vol. 294, Dec. 2001, pp. 2127-2130, doi:10.1126/science.1065467.Article in a conference proceedings:[10]H. Goto, Y. Hasegawa, and M. Tanaka, “Efficien t SchedulingFocusing on the Duality of MPL Representatives,” Proc. IEEE Symp.Computational Intelligence in Scheduling (SCIS 07), IEEE Press, Dec.2007, pp. 57-64, doi:10.1109/SCIS.2007.357670.Figure 2. Example of a TWO-COLUMN figure caption: (a) this is the format for referencing parts of a figure.。

IEEE论文模板(官方版)

Paper Title (use style: paper title) Subtitle as needed (paper subtitle)Authors Name/s per 1st Affiliation(Author)Dept. name of organization (Line 1 of Affiliation - optional)Name of organization - acronymsacceptable (line 2)City, Country (line 3)************– optional (line 4)Authors Name/s per 2nd Affiliation(Author)Dept. name of organization (Line 1 of Affiliation - optional)Name of organization - acronymsacceptable (line 2)City, Country (line 3)************– optional (line 4)Abstract—This electronic document is a “live” template. The various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. DO NOT USE SPECIAL CHARACTERS, SYMBOLS, OR MATH IN YOUR TITLE OR ABSTRACT. (Abstract)Index Terms—Component, formatting, style, styling, insert. (key words)I.I NTRODUCTION (H EADING 1)All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings (see author-kit message for contact info).This template provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. PLEASE DO NOT RE-ADJUST THESE MARGINS. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow.II.T YPE S TYLE AND F ONTSWherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in appearance to Times. Avoid using bit-mapped fonts. True Type 1 or Open Type fonts are required. Please embed all fonts, in particular symbol fonts, as well, for math, etc.III.E ASE OF U SEThe template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations.IV.P REPARE Y OUR P APER B EFORE S TYLING Before you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads—the template will do that for you.Finally, complete content and organizational editing before formatting. Please take note of the following items when proofreading spelling and grammar.A.Abbreviations and Acronyms (Heading2)Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE and SI do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable. B.Units•Use either SI or CGS as primary units. (SI units are encouraged.)English units may be used assecondary units (in parentheses).An exception would be the use ofEnglish units as identifiers intrade, such as “3.5-inch diskdrive”.•Avoid combining SI and CGS units, such as current in amperes andmagnetic field in oersteds. Thisoften leads to confusion becauseequations do not balancedimensionally. If you must usemixed units, clearly state theunits for each quantity that youuse in an equation.•Do not mix complete spellings and abbreviations of units: “Wb/m2”or “webers per square meter”,not “webers/m2”. Spell outunits when they appear in text:“. . . a few henries”, not“. . . a few H”.•Use a zero before decimal points: “0.25”, not “.25”. Use “cm3”,not “cc”. (bullet list)C.EquationsThe equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your equation should be typed using either the Times New Roman or the Symbol font (please no other font). To create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.Number equations consecutively. Equation numbers, within parentheses, are to position flush right, as in Eq. 1, using a right tab stop. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols for quantities and variables, but not Greek symbols. Use a long dash rather than a hyphen for a minus sign. Punctuate equations with commas or periods when they are part of a sentence, as inNote that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or immediately following the equation. Use “Eq. 1” or “Equation 1”, not “(1)”, esp ecially at the beginning of a sentence: “Equation 1 is . . .”D.Some Common Mistakes•The word “data” is plural, not singular.•The subscript for the permeability of vacuum, and other common scientific constants, is zero withsubscript formatting, not alowercase letter “o”.•In American English, commas, semi-/colons, periods, question andexclamation marks are locatedwithin quotation marks only when acomplete thought or name is cited,such as a title or full quotation.When quotation marks are used,instead of a bold or italictypeface, to highlight a word orphrase, punctuation should appearoutside of the quotation marks. Aparenthetical phrase or statementat the end of a sentence ispunctuated outside of the closingparenthesis (like this). (Aparenthetical sentence ispunctuated within the parentheses.)• A graph within a graph is an “inset”, not an “insert”. Theword alternatively is preferred tothe word “alternately” (unlessyou really mean something thatalternates).•Do not use the word “essentially” to mean“approximately” or“effectively”.•In your paper title, if the words “that uses” can accuratelyreplace the word “using”,capitalize the “u”; if not, keepusing lower-cased.•Be aware of the different meanings of the homophones “affect” and“effect”, “complement” and“compliment”, “discreet” and“discrete”, “principal” and“principle”.•Do not confuse “imply” and “infer”.•The prefix “non” is not a word;it should be joined to the word itmodifies, usually without a hyphen.•There is no period after the “et” in the Latin abbreviation“et al.”.•The abbreviation “i.e.” means “that is”, and the abbreviation“e.g.” means “for example”.An excellent style manual for science writers is given by Young [7].V.U SING THE T EMPLATEAfter the text edit has been completed, the paper is ready for the template. Duplicate the template file by using the Save As command, and use the naming convention prescribed by your conference for the name of your paper. In this newly created file, highlight all of the contents and import your prepared text file. You are now ready to style your paper; use the scroll down window on the left of the MS Word Formatting toolbar.A.Authors and AffiliationsThe template is designed so that author affiliations are not repeated each time for multiple authors of the same affiliation. Please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). This template was designed for two affiliations.1)For Author/s of Only One Affiliation (Heading 3): To change the default, adjust the template as follows.a)Selection (Heading 4): Highlight all author and affiliation lines.b)Change Number of Columns: Select Format > Columns >Presets > One Column.c)Deletion: Delete the author and affiliation lines for the second affiliation.2)For Authors of More than Two Affiliations: To change the default, adjust the template as follows.a)Selection: Highlight all author and affiliation lines.b)Change Number of Columns: Select Format > Columns > Presets > One Column.c)Highlight Author and Affiliation Lines of Affiliation 1 and Copy this Selection.d)Formatting: Insert one hard return immediately after the last character of the last affiliation line. Then paste down the copy of affiliation 1. Repeat as necessary for each additional affiliation.e)Reassign Number of Columns: Place your cursor to the right of the last character of the last affiliation line of an even numbered affiliation (e.g.,if there are five affiliations, place your cursor at end of fourth affiliation). Drag the cursor up to highlight all of the above author and affiliation lines. Go to Format > Columns and select “2 Columns”. If you have an odd number of affiliations, the final affiliation will be centered on the page; all previous will be in two columns.B.Identify the HeadingsHeadings, or heads, are organizational devices that guide the reader through your paper. There are two types: component heads and text heads.Component heads identify the different components of your paper and are not topically subordinate to each other. Examples include Acknowledgments and References and, for these, the correct style to use is “Heading 5”. Use “figure caption” for your Figure captions, and“table head”for your table title. Run-in heads, such as “Abstract”, will require you to apply a style (in this case, italic) in addition to the style provided by the drop down menu to differentiate the head from the text.Text heads organize the topics on a relational, hierarchical basis. For example, the paper title is the primary text head because all subsequent material relates and elaborates on this one topic. If there are two or more sub-topics, the next level head (uppercase Roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads should be introduced. Styles named “Heading 1”, “Heading 2”,“Heading 3”, and “Heading 4”are prescribed.C.Figures and TablesPlace figures and tables at the top and bottom of columns. Avoid placing them in the middle of columns. Large figures and tables may span across both columns. Figure captions should be below the figures; table captions should appear above the tables. Insert figures and tables after they are cited in the text. Use the abbreviation “Fig. 1” in the text, and “Figure 1” at the b eginning of a sentence.Use 8 point Times New Roman for figure labels. Use words rather than symbols or abbreviations when writing figure-axis labels to avoid confusing the reader. As an example, write the quantity “Magnetization”, or “Magnetization, M”, not just “M”.If including units in the label, present them within parentheses. Do not label axes only with units. In the example, write “Magnetization (A/m)” or “Magnetization {A[m(1)]}”, not just “A/m”. Do not label axes with a ratio of quantities and units. For example, write “Temperature (K)”, not “Temperature/K”.D.FootnotesUse footnotes sparingly (or not at all) and place them at the bottom of the column on the page on which theyare referenced. Use Times 8-point type, single-spaced.To help your readers, avoid using footnotes altogether and include necessary peripheral observations in the text (within parentheses, if you prefer, as in this sentence).Number footnotes separately from reference numbers, and in superscripts. Do not put footnotes in the reference list. Use letters for table footnotes.TABLE I. T ABLE T YPE S TYLESTab le Hea dTable Column HeadTable column subhead Subhe ad SubheadcopyMore table copy aa. Sample of a table footnote. (table footnote)Fig. 1. Example of a figure caption.(figure caption)VI. C OPYRIGHT F ORMSYou must submit the IEEE Electronic Copyright Form (ECF) as described in your author-kit message. THIS FORM MUST BE SUBMITTED IN ORDER TO PUBLISH YOUR PAPER.A CKNOWLEDGMENTThe preferred spelling of the word “acknowledgment” in America is without an “e” after the “g”. Avoid the stilted expression, “One of us (R. B. G.) thanks . . .” Instead, try “R. B. G. thanks”. Put applicable sponsor acknowledgments here; DO NOT place them on the first page of your paper or as a footnote.R EFERENCESList and number all bibliographical references in 9-point Times, single-spaced, at the end of your paper. Whenreferenced in the text, enclose thecitation number in square brackets, for example: [1]. Where appropriate,include the name(s) of editors ofreferenced books. The template will number citations consecutively withinbrackets [1]. The sentence punctuationfollows the bracket [2]. Refer simplyto the reference number, as in“[3]”—do not use “Ref. [3]” or“reference [3]”. Do not use referencecitations as nouns of a sentence (e.g., not: “as the writer explains in [1]”).Unless there are six authors or more give all authors’ names and do not use “et al.”. Papers that have not been published, even if they have been submitted for publication, should be cited as “unpublished” [4]. Papers that have been accepted for publicationshould be cited as “in press” [5].Capitalize only the first word in a paper title, except for proper nouns and element symbols.For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [6].[1]G. Eason, B. Noble, and I. N.Sneddon, “On certain integrals of Lipschitz-Hankel type involving products of Bessel functions,”Phil. Trans. Roy. Soc. London, vol.A247, pp. 529–551, April 1955.(references)[2]J. Clerk Maxwell, A Treatise onElectricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68–73.[3]I. S. Jacobs and C. P. Bean, “Fineparticles, thin films and exchange anisotropy,” in Magnetism, vol.III, G. T. Rado and H. Suhl, Eds.New York: Academic, 1963, pp. 271–350.[4]K. Elissa, “Title o f paper ifknown,” unpublished.[5]R. Nicole, “Title of paper withonly first word capitalized,” J.Name Stand. Abbrev., in press.[6]Y. Yorozu, M. Hirano, K. Oka, and Y.Tagawa, “Electron spectroscopy studies on magneto-optical media and plastic substrate inter face,”IEEE Transl. J. Magn. Japan, vol. 2, pp. 740–741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p.301, 1982].[7]M. Young, The Technical Writer'sHandbook. Mill Valley, CA: University Science, 1989.。

ieee论文格式模板

ieee论文格式模板下面是由整理的ieee论文格式模板，谢谢你的阅读。

ieee论文格式模板1、题目：应简洁、明确、有概括性，字数不宜超过20个字。

2、摘要：要有高度的概括力，语言精练、明确，中文摘要约100—200字;3、关键词：从论文标题或正文中挑选3～5个最能表达主要内容的词作为关键词。

5、正文：论文正文字数一般应在3000字以上。

论文正文：包括前言、本论、结论三个部分。

前言(引言)是论文的开头部分，主要说明论文写作的目的、现实意义、对所研究问题的认识，并提出论文的中心论点等。

前言要写得简明扼要，篇幅不要太长。

本论是论文的主体，包括研究内容与方法、实验材料、实验结果与分析(讨论)等。

在本部分要运用各方面的研究方法和实验结果，分析问题，论证观点，尽量反映出自己的科研能力和学术水平。

结论是论文的收尾部分，是围绕本论所作的结束语。

其基本的要点就是总结全文，加深题意。

6、谢辞：简述自己通过做论文的体会，并应对指导教师和协助完成论文的有关人员表示谢意。

7、参考文献：在论文末尾要列出在论文中参考过的专著、论文及其他资料，所列参考文献应按文中参考或引证的先后顺序排列。

8、注释：在论文写作过程中，有些问题需要在正文之外加以阐述和说明。

9、附录：对于一些不宜放在正文中，但有参考价值的内容，可编入附录中。

该竞赛在国际上已开展了30多年，不少高校还开设了相应课程。

它可以在“迷宫中自动感知并记忆迷宫地图，通过一定的算法寻找一条最佳路径，以最快的速度到达目的地。

IEEE论文标准格式

Author Guidelines for ICPCA07 ProceedingsManuscriptsBin Hu1, Xiaoqiang Li2, Xiaojun Deng21Department of Computing, University of Central England,United Kingdombin.hu@2Guiling University of Technology, Guilin, P. R. Chinaxql@;xjdeng@AbstractThe abstract is to be in fully-justified italicized text, at the top of the left-hand column as it is here, below the author information. Use the word “Abstract” as the title, in 12-point Times, boldface type, centered relative to the column, initially capitalized. The abstract is to be in 10-point, single-spaced type, and up to 150 words in length. Leave two blank lines after the abstract, then begin the main text.1. IntroductionAll manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at the IEEE Computer Society Press: Phone (714) 821-8380 or Fax (714) 761-1784.2. Formatting your paperAll printed material, including text, illustrations, and charts, must be kept within a print area of 6-1/2 inches (16.51 cm) wide by 8-7/8 inches (22.51 cm) high. Do not write or print anything outside the print area. All text must be in a two-column format. Columns are to be 3-1/16 inches (7.85 cm) wide, with a 3/8 inch (0.81 cm) space between them. Text must be fully justified.A format sheet with the margins and placement guides is available as both Word and PDF files as <format.doc> and <format.pdf>. It contains lines and boxes showing the margins and print areas. If you hold it and your printed page up to the light, you can easily check your margins to see if your print area fits within the space allowed.3. Main titleThe main title (on the first page) should begin 1-3/8 inches (3.49 cm) from the top edge of the page, centered, and in Times 14-point, boldface type. Capitalize the first letter of nouns, pronouns, verbs, adjectives, and adverbs; do not capitalize articles, coordinate conjunctions, or prepositions (unless the title begins with such a word). Leave two 12-point blank lines after the title.4. Author name(s) and affiliation(s)Author names and affiliations are to be centered beneath the title and printed in Times 12-point, non-boldface type. Multiple authors may be shown in a two- or three-column format, with their affiliations italicized and centered below their respective names. Include e-mail addresses if possible. Author information should be followed by two 12-point blank lines.5. Second and following pagesThe second and following pages should begin 1.0 inch (2.54 cm) from the top edge. On all pages, the bottom margin should be 1-1/8 inches (2.86 cm) from the bottom edge of the page for 8.5 x 11-inch paper; for A4 paper, approximately 1-5/8 inches (4.13 cm) from the bottom edge of the page.6. T ype-style and fontsWherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in appearance to Times. Avoid using bit-mapped fonts if possible. True-Type 1 fonts are preferred. 7. Main textType your main text in 10-point Times, single-spaced. Do not use double-spacing. All paragraphs should be indented 1/4 inch (approximately 0.5 cm). Be sure your text is fully justified—that is, flush left and flush right. Please do not place any additional blank lines between paragraphs.Figure and table captions should be 10-point boldface Helvetica (or a similar sans-serif font). Callouts should be 9-point non-boldface Helvetica. Initially capitalize only the first word of each figure caption and table title. Figures and tables must be numbered separately. For ex ample: “Figure 1. Database contexts”, “Table 1. Input data”. Figure captions are to be centered below the figures. Table titles are to be centered above the tables.8. First-order headingsFor example, “1. Introduction”, should be Times 12-point boldface, initially capitalized, flush left, with one blank line before, and one blank line after. Use a period (“.”) after the heading number, not a colon.8.1. Second-order headingsAs in this heading, they should be Times 11-point boldface, initially capitalized, flush left, with one blank line before, and one after.8.1.1. Third-order headings.Third-order headings, as in this paragraph, are discouraged. However, if you must use them, use 10-point Times, boldface, initially capitalized, flush left, preceded by one blank line, followed by a period and your text on the same line.9. FootnotesUse footnotes sparingly (or not at all) and place them at the bottom of the column on the page on which they are referenced. Use Times 8-point type, single-spaced. To help your readers, avoid using footnotes altogether and include necessary peripheral observations in the text (within parentheses, if you prefer, as in this sentence).10. ReferencesList and number all bibliographical references in 9-point Times, single-spaced, atthe end of your paper. When referenced in the text, enclose the citation number in square brackets, for example [1]. Where appropriate, include the name(s) of editors of referenced books.[1] A.B. Smith, C.D. Jones, and E.F. Roberts, “Article Title”, Journal, Publisher, Location, Date, pp. 1-10.[2] Jones, C.D., A.B. Smith, and E.F. Roberts, Book Title, Publisher, Location, Date. 11. Copyright forms and reprint ordersYou must include your fully-completed, signed IEEE copyright release form when you submit your paper. We must have this form before your paper can be published in the proceedings. The copyright form is available as a Word file, <copyright.doc>, as a PDF version, <copyright.pdf>, and as a text file in <authguid.txt>.Reprints may be ordered using the form provided as <reprint.doc> or <reprint.pdf>.。

ieee期刊论文格式

ieee期刊论⽂格式作为科技⾰新的催化剂，IEEE通过在⼴泛领域的活动规划和服务⽀持其成员的需要。

下⾯是由店铺整理的ieee期刊论⽂格式，谢谢你的阅读。

ieee期刊论⽂格式⼀、封⾯题⽬：⼩⼆号⿊体加粗居中。

各项内容：四号宋体居中。

⼆、⽬录⽬录：⼆号⿊体加粗居中。

章节条⽬：五号宋体。

⾏距：单倍⾏距。

三、论⽂题⽬：⼩⼀号⿊体加粗居中。

四、中⽂摘要 1、摘要：⼩⼆号⿊体加粗居中。

2、摘要内容字体：⼩四号宋体。

3、字数：300字左右。

4、⾏距：20磅 5、关键词：四号宋体，加粗。

词3-5个，每个词间空⼀格。

五、英⽂摘要 1、ABSTRACT：⼩⼆号 Times New Roman. 2、内容字体：⼩四号 Times New Roman. 3、单倍⾏距。

4、Keywords：四号加粗。

词3-5个，⼩四号 Times New Roman. 词间空⼀格。

六、绪论⼩⼆号⿊体加粗居中。

内容500字左右，⼩四号宋体，⾏距：20磅七、正⽂ (⼀)正⽂⽤⼩四号宋体 (⼆)安保、管理类毕业论⽂各章节按照⼀、⼆、三、四、五级标题序号字体格式章：标题⼩⼆号⿊体，加粗，居中。

节：标题⼩三号⿊体，加粗，居中。

⼀级标题序号如：⼀、⼆、三、标题四号⿊体，加粗，顶格。

⼆级标题序号如：(⼀)(⼆)(三) 标题⼩四号宋体，不加粗，顶格。

三级标题序号如：1.2.3. 标题⼩四号宋体，不加粗，缩进⼆个字。

四级标题序号如：(1)(2)(3) 标题⼩四号宋体，不加粗，缩进⼆个字。

五级标题序号如：①②③标题⼩四号宋体，不加粗，缩进⼆个字。

医学、体育类毕业论⽂各章序号⽤阿拉伯数字编码，层次格式为：1××××(⼩2号⿊体，居中)××××××××××××××(内容⽤4号宋体)。

IEEE论文格式模板A4大小-最新2013版

Paper Title* (use style: paper title) Subtitle as needed (paper subtitle)Authors Name/s per 1st Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2-name of organization, acronyms acceptableline 3-City, Countryline 4-e-mail address if desired Authors Name/s per 2nd Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2-name of organization, acronyms acceptableline 3-City, Countryline 4-e-mail address if desiredAbstract—This electronic document i s a “live”template and already defines the components of your paper [title, text, heads, etc.] in its style sheet. *CRITICAL: Do Not Use Symbols, Special Characters, or Math in Paper Title or Abstract. (Abstract) Keywords—component; formatting; style; styling; insert (key words)I.I NTRODUCTION (Heading 1)This template, modified in MS Word 2007 and saved as a “Word 97-2003 Document” for the PC, provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow.II.E ASE OF U SEA.Selecting a Template (Heading 2)First, confirm that you have the correct template for your paper size. This template has been tailored for output on the A4 paper size. If you are using US letter-sized paper, please close this file and download the file “MSW_USltr_format”.B.Maintaining the Integrity of the SpecificationsThe template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations.III.P REPARE Y OUR P APER B EFORE S TYLING Before you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you.Finally, complete content and organizational editing before formatting. Please take note of the following items when proofreading spelling and grammar:A.Abbreviations and AcronymsDefine abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable.B.Units•Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units may be used assecondary units (in parentheses). An exception wouldbe the use of English units as identifiers in trade, suchas “3.5-inch disk drive.”•Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leadsto confusion because equations do not balancedimensionally. If you must use mixed units, clearlystate the units for each quantity that you use in anequation.•Do not mix complete spellings and abbreviations of units: “Wb/m2”or “webers per square meter,”not“webers/m2.” Spell units when they appear in text: “...afew henries,” not “...a few H.”•Use a zero before decimal points: “0.25,” not “.25.” Use “cm3,” not “cc.” (bullet list)Identify applicable sponsor/s here. If no sponsors, delete this text box (sponsors).C. EquationsThe equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your equation should be typed using either the Times New Roman or the Symbol font (please no other font). To create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.Number equations consecutively. Equation numbers, within parentheses, are to position flush right, as in (1), using a right tab stop. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols for quantities and variables, but not Greek symbols. Use a long dash rather than a hyphen for a minus sign. Punctuate equations with commas or periods when they are part of a sentence, as ina +b = γ(1)α + β = χ. (1) (1) Note that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or immediately following the equation. Use “(1),” not “Eq. (1)” or “equation (1),” except at the beginning of a sentence: “Equation (1) is ...”D. Some Common Mistakes• The word “data ” is plural, not singular.• The subscript for the permeability of vacuum μ0, and other common scientific constants, is zero with subscript formatting, not a lowercase letter “o.” • In American English, commas, semi-/colons, periods, question and exclamation marks are located within quotation marks only when a complete thought or name is cited, such as a title or full quotation. When quotation marks are used, instead of a bold or italic typeface, to highlight a word or phrase, punctuation should appear outside of the quotation marks. A parenthetical phrase or statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.) • A graph within a graph is an “inset,” not an “insert.” The word alternatively is preferred to the word “alternately ” (unless you really mean something that alternates). • Do not use the word “essentially ” to mean “approximately ” or “effectively.” • In your paper title, if the words “that uses ” can accurately replace the word using, capitalize the “u ”; if not, keep using lower-cased. • Be aware of the different meanings of the homophones “affect ” and “effect,” “complement ” and “compliment,” “discreet ” and “discrete,” “principal ” and “principle.” • Do not confuse “imply ” and “infer.”• The prefix “non ” is not a word; it should be joined to the word it modifies, usually without a hyphen. • There is no period after the “et ” in the Latin abbreviation “et al.” • The abbreviation “i.e.” means “that is,” and the abbreviation “e.g.” means “for example.” An excellent style manual for science writers is [7].IV. U SING THE T EMPLATEAfter the text edit has been completed, the paper is ready for the template. Duplicate the template file by using the Save As command, and use the naming convention prescribed by your conference for the name of your paper. In this newly created file, highlight all of the contents and import your prepared text file. You are now ready to style your paper; use the scroll down window on the left of the MS Word Formatting toolbar. A. Authors and AffiliationsThe template is designed so that author affiliations are not repeated each time for multiple authors of the same affiliation. Please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). This template was designed for two affiliations. 1) For author/s of only one affiliation (Heading 3): To change the default, adjust the template as follows.a) Selection (Heading 4): Highlight all author and affiliation lines.b) Change number of columns: Select the Columns icon from the MS Word Standard toolbar and then select “1 Column ” from the selection palette.c) Deletion: Delete the author and affiliation lines for the second affiliation.2) For author/s of more than two affiliations: To change the default, adjust the template as follows.a) Selection: Highlight all author and affiliation lines. b) Change number of columns: Select the “Columns ” icon from the MS Word Standard toolbar and then select “1 Column ” from the selection palette.c) Highlight author and affiliation lines of affiliation 1 and copy this selection.d) Formatting: Insert one hard return immediately after the last character of the last affiliation line. Then paste down the copy of affiliation 1. Repeat as necessary for each additional affiliation.e) Reassign number of columns: Place your cursor to the right of the last character of the last affiliation line of an even numbered affiliation (e.g., if there are five affiliations, place your cursor at end of fourth affiliation). Drag the cursor up to highlight all of the above author and affiliation lines. Go to Column icon and select “2 Columns ”. If you have an odd number of affiliations, the final affiliation will be centered on the page; all previous will be in two columns.B.Identify the HeadingsHeadings, or heads, are organizational devices that guide the reader through your paper. There are two types: component heads and text heads.Component heads identify the different components of your paper and are not topically subordinate to each other. Examples include ACKNOWLEDGMENTS and REFERENCES, and for these, the correct style to use is “Heading 5.”Use “figure caption”for your Figure captions, and “table head”for your table title. Run-in heads, such as “Abstract,” will require you to apply a style (in this case, italic) in addition to the style provided by the drop down menu to differentiate the head from the text.Text heads organize the topics on a relational, hierarchical basis. For example, the paper title is the primary text head because all subsequent material relates and elaborates on this one topic. If there are two or more sub-topics, the next level head (uppercase Roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads should be introduced. Styles named “Heading 1,”“Heading 2,”“Heading 3,” and “Heading 4” are prescribed. C.Figures and Tables1)Positioning Figures and Tables: Place figures and tables at the top and bottom of columns. Avoid placing them in the middle of columns. Large figures and tables may span across both columns. Figure captions should be below the figures; table heads should appear above the tables. Insert figures and tables after they are cited in the text. Use the abbreviation “Fig. 1,” even at the beginning of a sentence.TABLE I. T ABLE S TYLESa.Sample of a Table footnote. (Table footnote)b. Fig. 1.Example of a figure caption. (figure caption)Figure Labels: Use 8 point Times New Roman for Figure labels. Use words rather than symbols or abbreviations when writing Figure axis labels to avoid confusing the reader. As an example, write the quantity “Magnetization,”or “Magnetization, M,”not just “M.”If including units in thelabel, present them within parentheses. Do not label axes onlywith units. In the example, write “Magnetization (A/m)”or “Magnetization (A ( m(1),” not just “A/m.” Do not label axeswith a ratio of quantities and units. For example, write “Temperature (K),” not “Temperature/K.”A CKNOWLEDGMENT (Heading 5)The preferred spelling of the word “acknowledgment”in America is without an “e”after the “g.”Avoid the stilted expression “o n e of us (R. B. G.) thanks ...”. Instead, try “R. B.G. thanks...”. Put sponsor acknowledgments in the unnumbered footnote on the first page.R EFERENCESThe template will number citations consecutively within brackets [1]. The sentence punctuation follows the bracket [2]. Refer simply to the reference number, as in [3]—do not use “Ref. [3]”or “reference [3]”except at the beginning of a sentence: “Reference [3] was the first ...”Number footnotes separately in superscripts. Place the actual footnote at the bottom of the column in which it was cited. Do not put footnotes in the reference list. Use letters for table footnotes.Unless there are six a uthors or more give all authors’ names; do not use “et al.”. Papers that have not been published, even if they have been submitted for publication, should be cited as “unpublished”[4]. Papers that have been accepted for publication should be cited as “in press”[5]. Capitalize only the first word in a paper title, except for proper nouns and element symbols.For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [6].[1]G. Eason, B. Noble, and I.N. Sneddon, “On certain integrals ofLipschitz-Hankel type involving products of Bessel functions,”Phil.Trans. Roy. Soc. London, vol. A247, pp. 529-551, April 1955.(references)[2]J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol.2. Oxford: Clarendon, 1892, pp.68-73.[3]I.S. Jacobs and C.P. Bean, “Fine particles, thin films and exchangeanisotropy,” in Magnetism, vol. III, G.T. Rado and H. Suhl, Eds. New York: Academic, 1963, pp. 271-350.[4]K. Elissa, “Title of paper if known,” unpublished.[5]R. Nicole, “Title of paper with only first word capitalized,”J. NameStand. Abbrev., in press.[6]Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopystudies on magneto-optical media and plastic substrate interface,” IEEE Transl. J. Magn. Japan, vol. 2, pp. 740-741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p. 301, 1982].[7]M. Young, The Technical Writer’s Handbook. Mill Valley, CA:University Science, 1989.。

ieee的参考文献格式

ieee的参考文献格式IEEE（Institute of Electrical and Electronics Engineers）参考文献格式是一种常用的学术引用格式，主要用于工程技术领域的论文和期刊。

下面我将从多个角度全面介绍IEEE参考文献格式。

一、期刊文章的引用格式：[1] A. N. Other, “Title of article,” Abbrev. Title of Journal, vol. x, no. x, pp. xxx-xxx, Abbrev. Month, year.二、会议论文的引用格式：[2] A. N. Other, “Title of paper,” in Abbrev. Titleof Conf., City of Conf., Abbrev. State, year, pp. xxx-xxx.三、图书的引用格式：[3] A. N. Other, Title of Book. City of Publisher,(only U.S. State), Country: Publisher, year.四、网站文章的引用格式：[4] A. N. Other, “Title of article,” Title of Journal, vol. x, no. x, pp. xxx-xxx, Abbrev. Month, year. Available: site. Accessed on: Month day, year.五、专利的引用格式：[5] A. N. Other, “Title of patent,” Patent x xxx xxx, Abbrev. Month, day, year.六、学位论文的引用格式：[6] A. N. Other, “Title of thesis,” M.S. thesis, Abbrev. Dept., Abbrev. Univ., City of Univ., Abbrev. State, year.以上是IEEE参考文献格式的一些常见类型，每种类型都有特定的引用格式要求。

ieee 引用格式

IEEE（Institute of Electrical and Electronics Engineers，电气和电子工程师协会）引用格式是一种用于学术论文、报告和文档的参考文献格式。

IEEE 引用格式分为以下几个部分：1. 期刊文章：引用格式如下：[序号] 作者。

文章标题[J]. 期刊名称，年份，卷号（期号）：页码范围.示例：[1] 张三，李四。

基于机器学习的图像识别研究[J]. 计算机学报，2019，42（2）：300-310.2. 会议论文：引用格式如下：[序号] 作者。

论文标题[C]. 会议名称，会议地点，年份：页码范围.示例：[2] 王五，赵六。

面向移动设备的人脸识别技术[C]. 2018 IEEE 国际计算机视觉大会，北京，2018:123-128.3. 学位论文：引用格式如下：[序号] 作者。

论文题目[D]. 学位授予单位，年份.示例：[3] 诸葛亮。

智能交通系统设计与实现[D]. 清华大学，2017.4. 书籍：引用格式如下：[序号] 作者。

书名[M]. 版本（如有）. 出版地：出版社，年份.示例：[4] 鲁迅。

呐喊[M]. 北京：人民文学出版社，2005.5. 专利：引用格式如下：[序号] 发明人。

专利名称[P]. 国别：专利号，年份.示例：[5] 马云，杨过，张三丰。

一种分布式数据库系统[P]. 中国：ZL201710123456. 注意：- 序号：根据参考文献的类型，使用不同的序号，如：[1]、[2]、[3] 等。

- 引用格式中的各个部分需要按照相应规则缩进。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

矿产资源开发利用方案编写内容要求及审查大纲
矿产资源开发利用方案编写内容要求及《矿产资源开发利用方案》审查大纲一、概述
㈠矿区位置、隶属关系和企业性质。

如为改扩建矿山, 应说明矿山现状、
特点及存在的主要问题。

㈡编制依据
(1简述项目前期工作进展情况及与有关方面对项目的意向性协议情况。

(2 列出开发利用方案编制所依据的主要基础性资料的名称。

如经储量管理部门认定的矿区地质勘探报告、选矿试验报告、加工利用试验报告、工程地质初评资料、矿区水文资料和供水资料等。

对改、扩建矿山应有生产实际资料, 如矿山总平面现状图、矿床开拓系统图、采场现状图和主要采选设备清单等。

二、矿产品需求现状和预测
㈠该矿产在国内需求情况和市场供应情况
1、矿产品现状及加工利用趋向。

2、国内近、远期的需求量及主要销向预测。

㈡产品价格分析
1、国内矿产品价格现状。

2、矿产品价格稳定性及变化趋势。

三、矿产资源概况
㈠矿区总体概况
1、矿区总体规划情况。

2、矿区矿产资源概况。

3、该设计与矿区总体开发的关系。

㈡该设计项目的资源概况
1、矿床地质及构造特征。

2、矿床开采技术条件及水文地质条件。