仪器仪表专业词汇

·自控(仪表)安装图册
INSTRUMENT HOOK-UP DRAWING(INST.HOOK-UP DWG.)
·安装图
INSTALLATION DRAWING(INSTL.DWG.)
·无缝
SEAMLESS(SMLS)
·镀锌
GALVANIZED(GALV)
·带螺纹
THREAD END(T.E)
·加厚
THICKED(T.D)
·对焊
BUTT-WELDING(B.W)
·承插焊
SOCKET-WELDING(S.W)
·卡套式
FERRULE-TYPE(F.T)
·插入式
INSERT-TYPE(INT.)
·压环式
COMPRESSION-TYPE(COMP.)
·内螺纹
FEMALE THREAD(F)
·外螺纹
MALE THREAD(M)
·二阀组
2-VALVE MANIFOLD
·多路阀
GAUGE MULTIPORT VALVE
·三阀组
3-VALVE MANIFOLD
·五阀组
5-VALVE MANIFOLD
·导压管
PRESSURE PIPE
·气动管
PNEUMATIC TUBE
·取压管接头
PRESSURE TAP
·压力表接头
GAUGE CONNECTOR
·冷凝弯(圈)
PIPE SYPHON
·终端接头
END CONNECTOR
·活接头
UNION
·弯通
ELBOW
·三通
TEE
·穿板接头
BULKHEAD UNION
·填料函
PACKING
·带丝堵三通
PLUG TEE
·放空丝堵
VENT PLUG
·排放丝堵
DRAIN PLUG
·隔离容器
SEAL CHAMBER
·冷凝容器
CONDENSATE POT
·分离容器
SEPARATOR OR SEAL CHAMBER
·大小头
REDUCER
·管帽
CAP
·丝堵
PLUG
·单头活接头
HALF UNION
·伴热管
TRACER
·保温
INSULATION
·疏水器
STEAM TRAP
·保温箱(或保护箱)
HEATING BOX(PROTECTION BOX)
·防爆密封接头
EX(d)PACKING GLAND
·防水密封接头
WATER-PROOF PACKING GLAND
·防爆铠装电缆密封接头
EX(d).
·防爆铠装电缆密封接头
EX(d).
食物英语Pear梨子avocado南美梨cantaloupe美国香瓜Banana香蕉
防爆铠装电缆密封接头EX(d).ARMORED-CABLE PACKING GLAND
防水铠装电缆密封接头WATER-PROOF ARMORED-CABLE PACKING GLAND
接管式防爆密封接头EX(d).PACKING GLAND FOR CONNECTING PIPE
接管式防水密封接头WATER-PROOF PACKING GLAND FOR CONNECTING PIPE
防爆密封接头挠性管FLEXIBLE CONDUIT WITH EX(d).PACKING GLAND
防水密封接头挠性管FLEXIBLE CONDUIT WITH WATER-PROOF PACKING GLAND
防水挠性管WATER-PROOF FLEXIBLE CONDUIT
低压镀锌焊接钢管LOW PRESSURE GALVANIZED PIPE.(L.P.GALV.)
钢制电缆管RIGID STEEL CONDUIT
穿线盒PULL BOX
密封接头SEALING FITTING
护线帽BUSHING
锁紧螺母LOCK NUT
管箍COUPLING
标准弯管NORMAL BEND
通用穿线盒UNIVERASAL FITTING
增安型INCREASED-SAFETY
接线箱JUNCTION BOX
电缆汇线槽CABLE DUCT
流量Flow
物位Level
液位Liquid level
温度Temperature
压力Pressure
分析Analysis
指示Indicating
记录Recording
传递Transmitting
控制Controlling
调节Regulating
信号Signaling
联锁Interlocking
积算Integrating
遥控Remote controlling
信号报警Alarming
声光信号Acoustic and light signals
多点记录Multipoint recording
多点指示Multipoint indicating
集中检测Controlized measurement
人工操作Manual operation
测量范围Measuring range
分度号Graduation
输入Input
输出Output
刻度Scale
等分刻度Equally divided scale
等百分比Equal percent
精度(指仪表)Precision
精度(

指测量)Accuracy
流量特性Flow character(istic)
线性(调节阀)Linear
对数(调节阀)Logarithmic
方根(指记录仪)Square root
力矩(指执行器)Moment
公称力矩(指执行器)Nominal moment
行程(指执行器)Stroke
常温Ambient temperature
常压Atm.Pressure
微分Derivative
积分Integral
上限值Upper limit
下限值Lower limit
取压点Pressure tapping point
检测点Measured point
取样点Sampling point
正环室(指孔板)Plus carrier-ring
负环室(指孔板)Minus carrier-ring
均压环(指孔板)Pressure-equalizing ring
伴热管线Tracing pipe
脉冲(导压)管线Impulse pipe
负迁移Negative suppression
正迁移Positive suppression
保护管(指热电阻,热电偶)Sheath
测温(保护)套(指设备带的)Thermowell
插入深度Insertion length
(浸入深度)(Immersion length)
仪表盘开孔Panel-board cut-out
一次仪表Primary instrument
二次仪表Secondary instrument
现场(就地)安装Field(local)mounting
盘装Panel mounting
架装Rack mounting
柱上安装Pole mounting
侧面安装Side mounting
盘面安装Surface mounting
壁装Wall mounting
滞后Lag
易接近性Accessibility
可见性Visibility
(安装)位置(Mounting)location
间隙Clearance
接管Piping
接线Wiring
注字(指铭牌)Inscription
工业双金属温度计Industrial bimetallic thermometer
玻璃水银温度计Mercury-in-glass thermometer
电接点压力温度计Manometric thermometer with electric contacts
光学温度计Optical pyrometer
表面热电偶Surface thermocouple
镍铬-镍硅热电偶Chromel-silicel thermocouple
镍铬-镍铝热电偶Chromel-alumel thermocouple
铂铑-铂热电偶Platinum-rhodium platinum thermocouple
固定螺纹(普通式)镍铬-镍铝热电偶
Chromel-alumel thermocouple with fixed threaded bushing
固定螺纹(防溅式)镍铬-镍铝热电偶
Splash-proof chromel-alumel thermocouple with fixed threaded bushing
双支热电偶Twin thermocouple
铠装热电偶Armored thermocouple
铂热电阻Platinum resistance thermometer
表面热电阻Surface resistance thermometer
可动法兰普通式铂热电阻Platinum resistance thermometer with movable flange
温包Thermal bulb
序号Ser.No.
控制点Tag No.of control point
测量和控制对象Object to be measured and controlled
介质特性Characteristics of process fluid
被测介质Process fluid measured
被调介质Process fluid manipulated
(设备)型号规格Instrument type and specification
变送单元Transmitting unit
调节单元Controlling unit
显示单元Displaying unit
辅助单元Auxiliary unit
测量元件Measuring element
安装地点Mounting location
型号及规格Type and specification
数量Quantity
调节阀Control valve
定位器Positioner
系统安装图号System mounting drawing No.
备注Remarks
仪表位号Instrument tag No.
(用途对象)及安装地点Service and mounting location
自控材料表List of material for process control
名称及规格Des

cription&specification
型号或标准号Type or standard No.
单位Unit
气动薄膜调节阀Pneumatic diaphragm control valve
流量特性：直线Flow characteristic：Liner
对数Logarithmic
信号压力Signal pressure
公称力矩Nominal moment
带手轮散热片阀门定位器With hand wheel,radiator&valve
气闭Air to close
气开Air to open
快开式Quick-open type
高压气动薄膜执行机构High pressure pneumatic diaphragm actuating mechanism
气动活塞切断阀Pneumatic piston cut-off valve
带手轮散热片With hand wheel,radiator
气动长行程执行机构Pneumatic long-stroke actuating mechanism
旋转刻度自动平衡指示仪Self-balancing indicator with rotating scale
长图自动平衡记录仪Strip-chart self-balancing recorder
条形自动平衡显示仪Self-balancing strip indicator
动圈式温度指示调节仪Moving coil type temperature indicating controller
小条型(自动平衡)指示仪Small strip-type(self-balancing)indicator
指示压力调节器Indicating pressure controller
弹簧管压力表Burdon-tube manometer
氨用压力表Ammonia manometer
氨用电接点压力表Ammonia manometer with electric contacts
隔膜压力表Diaphragm sealed manometer
法兰膜片隔离式压力表Flanged diaphragm sealed manometer
标准压力表Standard pressure gauge
电接点弹簧压力表Bourdon-tube manometer with electric contacts
氨用真空表Ammonia vacuum-gauge
膜片真空表Membrane vacuum-gauge
风压表Output air pressure gauge
膜盒式微压计Capsule-type micromanometer
双波纹管差压计Differential pressure gauge with double bellows
活塞式压力计Piston type pressure gauge
补偿微压计Compensating micromanometer
带冷凝管压力表Manometer with condensing tube
椭圆齿轮流量计Ovalgear flowmeter
湿式气体流量计Wet type gas flowmeter
气远传转子流量计Pneumatic remote transmitting rotameter
靶式流量计Target flowmeter
玻璃转子流量计Glass type rotameter
玻璃管液面计Glass-tube level gauge
浮标式遥控测液位计Remote measuring float level meter
环室标准孔板Standard orifice with carrier-rings
标准孔板Standard orifice
带柄平孔板Plate orifice with handle
组合式高压孔板Assemble type HP orifice
环室1/4圆喷嘴Quadrant nozzle with carrier-rings
蜗轮流量变送器Turbine flow transmit ter
频率转换积算器Frequency transducer with integrator
三阀体Three-valve manifold
三通电磁阀Three-way solenoid valve
小口径旋翼式冷水水表Rotating vane type cold water-meter TYQ-2型外浮筒液面调节器
Type TYQ-2external cage displacer level controller QBF3型单插入式法兰差压变送器
Type QBF3single insertion flanged differential pressure transmitter
带平面(或槽面,凹面)密封面的节流装置
Throttling device with flat(or grooved,female)sealing surface
法兰上钻孔取压的节流装置Throttling device with drilled holes on flange
带槽面(或

凹面)环室取压的节流装置
Throttling device grooved(or female)carrier-ring
圆形均压环取压的孔板Orifice plate with circular pressure-equalizing ring