工程管理专业英语相关翻译

工程管理专业英语相关翻译
工程管理专业英语相关翻译

1.1T he Project Life Cycle

1段:Project managers or the organization can divide projects into phases to provide better management control with appropriate links to the ongoing operations of the performing organization. Collectively, these phases are known as the project life cycle. Many organizations identify a specific set of life cycles for use on all of their projects.

项目经理或组织可以把每一个项目划分成若干个阶段,以便有效地进行管理控制,并与实施该项目组织的日常运作联系起来。这些项目阶段合在一起称为项目生命期。许多组织识别出一套具体的生命期供其所有的项目使用。

2段:For example, from the perspective of an owner, the project life cycle for a constructed facility may be illustrated schematically in Figure1-1.

从业主的角度来看,建设项目的生命周期可用图1-1表示。

Essentially, a project is conceived to meet market demands or needs in a timely fashion.

从本质上讲,一个项目试图及时满足市场需求。

in a timely fashion. 及时

meet market demands or needs 满足市场需求

Various possibilities may be considered in the conceptual planning stage, and the technological and economic feasibility of each alternative will be assessed and compared in order to select the best possible project.

在项目规划阶段,很多不同的方案都可能被考虑,同事每一天备选方案的技术可行性都经过评估和比较,以选出最优方案。

conceptual planning stage概念规划阶段

feasibility(study)可行性(研究)

alternative备选方案

the best possible project.最优方案

The financing schemes for the proposed alternatives must also be examined, and the project will be programmed with respect to the timing for its completion and for available cash flows.我们还需检验备选方案的财务计划,同事按照项目完工期限和用现金流来安排项目的进度计划The financing schemes财务计划

the proposed alternatives已有备选方案

with respect to关于至于相对于

cash flows.现金流

After the scope of the project is clearly defined, detailed engineering design will provide the blueprint for construction, and the definitive cost estimate will serve as the baseline for cost control.

项目范围界定后,详细的工程设计将提供建设蓝图,最终费用估计将作为控制成本的基准the blueprint for construction建设蓝图

cost control 成本估计

In the procurement and construction stage, the delivery of materials and the erection of the project on site must be carefully planned and controlled.

在采购和施工阶段,提供的材料和项目现场架设必须是经过精心策划和控制的。

the delivery of materials提供的材料

the erection of the project on site 项目现场架设

After the construction is completed, there is usually a brief period of start-up or shake-down of the constructed facility when it is first occupied.

施工完毕后,当建筑设施首先使用时,通常有一个短暂的启动期或动荡期。

start-up or shake-down 启动期或动荡期

Finally, the management of the facility is turned over to the owner for full occupancy until the facility lives out its useful life and is designated for demolition or conversion.

最后,设施的管理将移交给业主全权使用(和管理),直至其试用期结束,或者拆除,或者转让他用。

turned over to被移交给···

conversion 转作他用

3段:Of course, the stages of development in Figure1-1 may not be strictly sequential.

当然图1-1开发的阶段可能没有严格次序

Some of the stages require iteration, and others may be carried out in parallel or with overlapping time frames, depending on the nature, size and urgency of the project.

某些阶段可以重复,同事也可以和其他阶段平行或搭接进行,这一切取决于项目的特点规模和紧迫性。

iteration反复iterate

parallel平行

overlapping重复符合交搭

time frames时间框架一段时间

Furthermore, an owner may have in-house capacities to handle the work in every stage of the entire process, or it may seek professional advice and services for the work in all stages.

此外,业主可用内部能力处理整个过程中每一个阶段的工作,或者它可能会在各个阶段寻求专业意见及服务

Understandably, most owners choose to handle some of the work in-house and to contract outside professional services for other components of the work as needed.

可以理解的是,大多数业主选择处理一些内部工作,和签订专业服务合同可以同时满足其他工作的需要。

By examining the project life cycle from an owner’s perspective, we can focus on the proper roles of various activities and participants in all stages regardless of the contractual arrangements for different types of work.

从业主角度审视项目的全寿命期,我们得以将注意力集中在所有阶段不同活动和参与方的适当角色上,而不用去考虑不同工作类型合约的安排。

《机械工程专业英语教程》课文翻译

Lesson 1 力学的基本概念 1、词汇: statics [st?tiks] 静力学;dynamics动力学;constraint约束;magnetic [m?ɡ'netik]有磁性的;external [eks't?:nl] 外面的, 外部的;meshing啮合;follower从动件;magnitude ['m?ɡnitju:d] 大小;intensity强度,应力;non-coincident [k?u'insid?nt]不重合;parallel ['p?r?lel]平行;intuitive 直观的;substance物质;proportional [pr?'p?:??n?l]比例的;resist抵抗,对抗;celestial [si'lestj?l]天空的;product乘积;particle质点;elastic [i'l?stik]弹性;deformed变形的;strain拉力;uniform全都相同的;velocity[vi'l?siti]速度;scalar['skeil?]标量;vector['vekt?]矢量;displacement代替;momentum [m?u'ment?m]动量; 2、词组 make up of由……组成;if not要不,不然;even through即使,纵然; Lesson 2 力和力的作用效果 1、词汇: machine 机器;mechanism机构;movable活动的;given 规定的,给定的,已知的;perform执行;application 施用;produce引起,导致;stress压力;applied施加的;individual单独的;muscular ['m?skjul?]]力臂;gravity[ɡr?vti]重力;stretch伸展,拉紧,延伸;tensile[tensail]拉力;tension张力,拉力;squeeze挤;compressive 有压力的,压缩的;torsional扭转的;torque转矩;twist扭,转动;molecule [m likju:l]分子的;slide滑动; 滑行;slip滑,溜;one another 互相;shear剪切;independently独立地,自立地;beam梁;compress压;revolve (使)旋转;exert [iɡ'z?:t]用力,尽力,运用,发挥,施加;principle原则, 原理,准则,规范;spin使…旋转;screw螺丝钉;thread螺纹; 2、词组 a number of 许多;deal with 涉及,处理;result from由什么引起;prevent from阻止,防止;tends to 朝某个方向;in combination结合;fly apart飞散; 3、译文: 任何机器或机构的研究表明每一种机构都是由许多可动的零件组成。这些零件从规定的运动转变到期望的运动。另一方面,这些机器完成工作。当由施力引起的运动时,机器就开始工作了。所以,力和机器的研究涉及在一个物体上的力和力的作用效果。 力是推力或者拉力。力的作用效果要么是改变物体的形状或者运动,要么阻止其他的力发生改变。每一种

翻译期末作业

浅谈中国菜名的翻译 我国悠久的历史和广袤的国土孕育了中国独特的烹饪艺术和丰富的饮食文化。我们国家也以几千年的饮食文化文明于世。随着我国经济飞速发展,与国外交流日益增多,餐饮业也面临着走向世界的机遇和挑战。中国菜名是汉语语汇中承载中国文化最多的语汇之一, 不仅承载着几千年来的中国饮食文化, 还承载着大量的非饮食文化, 如神话、民俗、历史、文学、宗教信仰等等, 在菜名所传达的表层语义背后有着更为深厚复杂的多元文化元素。同时由于饮食与文化的密切联系,这些都大大增大了翻译的难度。 1.首先我们来看一下一些我们常见的错误翻译 长期以来,菜名的翻译没有统一的标准,加上译者水平有限和地域差异,并不了解菜式的内涵,致使很多菜名的翻译让人感到不知所云。比如口水鸡slobbering chicken、童子鸡chicken without sexual life、夫妻肺片the couple’s lung 等,这翻译让外国人看了都吓跑了,哪里还有食欲吃饭呢?再如东坡肉poet Dongpo’s braised pork,东坡肉是用蒸的方法做出来的,所以这里应该为Poet Dongpo’s steamed pork 而不是用braised;“鱼香肉丝”较常见的有两种译法,另外也有人译为shredded pork with garlic sauce,前者译法为直译,后者加了简单的解释,虽然看似简单易懂,很直观,但是译者没有弄清楚此菜的配料,川菜口味浓重,很多菜肴的配料都是少不了“川菜之魂”郫县豆瓣酱,鱼香肉丝正是用到此配料,是不用所谓的大蒜酱,所以后者翻译存在误的地方;水煮鱼,也是川菜中的代表作,又麻又辣,有译者翻译为tender stewed fish,这个译法不够全面,应该在后面加上in chili sauce;夫妻肺片译为pork lungs in chili sauce,这个译法的译者应该不明白此菜的来历和主料,夫妻肺片根本不是用猪肺做成的,而且和肺一点都不沾边,此菜的主料都是用牛内脏,所以这个译发讲不通。对于以上的翻译错误我们不能只是一笑而过,我们应该感受到菜名翻译的难度,从而思考怎样才能更好的翻译来达到最佳的效果。

土木专业英语翻译作业

桂林理工大学土木与建筑工程学院 土木工程专业英语外文翻译,中文翻译 姓名:马凤志 专业:土木应用 班级:10级9班 学号:3100510939

原文

中文翻译 The Influence of Concrete Compaction on the Strength of Concrete Filled Steel Tubes 压实混凝土对混凝土强度的影响 Lin-Hai Han School of Civil Engineering, Harbin University of Civil Engineering and Architecture, Haihe Road 202, PO Box 689, Harbin 150090, P.R. China 韩林海,哈尔滨建筑大学,土木与建筑工程学院,海河路202号,邮政信箱,689,哈尔滨,150090 中国 ABSTRACT: Tests on twenty-one concrete filled steel tubes to investigate the influence of compaction methods on the strength of concrete filled steel tubular members are reported. 摘要:测试二十一钢管混凝土试验,研究了钢管对混凝土构件强度压实方法的影响报告。 Two parameters were investigated, including slenderness ratio and load eccentricity. 对两个参数进行研究,包括长细比和荷载偏心。 It was found that better compaction of concrete resulted in higher values of the ultimate strength of concrete filled steel

机械工程专业英语翻译 华中科技大学版 李光布

1.机械设计过程 机械设计的最终目标是生产一种满足客户需求的有用产品,而且这种产品安全,高效,可靠,经济,实用。当回答这个问题时,广泛地思考,我将要设计的产品或系统的客户是谁? 在产品设计之前,了解所有客户的期望和期望是至关重要的。营销专业人员经常被用来管理客户期望的定义,但是设计师可能会把他们作为产品开发团队的一部分。 许多方法被用来确定客户想要什么。一种被称为质量功能部署或QFD的流行方法寻求(1)识别客户期望的所有特征和性能因素,以及(2)评估这些因素的相对重要性。QFD过程的结果是产品的一组详细功能和设计要求。 考虑设计过程如何配合为客户提供令人满意的产品所必须发生的所有功能以及在产品的整个生命周期中为产品提供服务也很重要。事实上,重要的是考虑产品在使用寿命后如何处置。影响产品的所有这些功能的总和有时被称为产品实现过程或PRP。PRP中包含的一些因素如下: ?营销功能来评估客户的要求 ?研究确定可在产品中合理使用的可用技术 ?可以包含在产品中的材料和组件的可用性 ?产品设计和开发 ?性能测试 ?设计文件 ?供应商关系和采购职能 ?考虑全球材料采购和全球营销 参加工作的技能 ?物理工厂和设施可用

?制造系统的能力 生产计划和生产系统的控制 ?生产支持系统和人员 ?质量体系要求 ?销售操作和时间表 ?成本目标和其他竞争性问题 ?客户服务要求 ?产品在生产,操作和处置过程中的环境问题 ?法律要求 ?金融资本的可用性 你可以添加到这个列表吗?您应该能够看到,产品的设计只是综合过程的一部分。在本文中,我们将更加注意设计过程本身,但必须始终考虑设计的可生产性。产品设计和制造过程设计的同时考虑通常被称为并行工程。 2.机械设计所需的技能 产品工程师和机械设计师在日常工作中使用广泛的技能和知识。这些技能和知识包含在以下内容中: ?素描,技术制图和计算机辅助设计 ?材料的性质?材料加工*和制造过程 ?化学的应用,如腐蚀防护,电镀和喷漆 静力学动力学材料的强度,运动学和机制 流体力学,热力学和传热 ?流体动力,电气现象的基本原理和工业控制

专业英语大作业

专业英语大作业 一:英译汉 翻译范围TCP/IP Illustrated, V olume 1: The Protocols 5.1~5.5 15.1~15.2 第5章RARP:逆地址解析协议 5.1简介 5.2 RARP报文格式 5.3 RARP示例 5.4 RARP服务的设计 5.5小结 练习 5.1简介 一个拥有本地磁盘的系统通常是从磁盘文件读取配置文件中获取其IP地址。但一个没有磁盘的系统,如X终端或无盘工作站,需要一些其它方式去获得其IP地址。 每个系统在网络上都有一个唯一的硬件地址,由网络接口的制造商分配。 RARP的原则是无盘系统从接口卡上读取其独特的硬件地址,并发送RARP请求(网络上的广播帧)要求别人对无盘系统的IP地址(使用RARP回应)进行应答。 虽然这个概念很简单,执行往往比ARP更难,在本章后面会描述其原因。 RARP的正式规范是RFC 903。 5.2 RARP报文格式 RARP报文的格式几乎与ARP报文是相同的(图4.3)。唯一的区别是,RARP 的请求或应答帧类型为0×8035,并且在操作层RARP请求值为3、RARP应答值为4。 图4-3 ARP在网络上请求与应答报文的格式 与ARP一样,RARP服务器请求是广播和RARP应答通常是单播。 5.3 RARP示例 在我们的网络,我们可以强制sun主机从网络引导,而不是它的本地磁盘。 如果我们在主机bsdi上运行RARP服务器和tcpdump,我们得到如图5.1所示的输出。我们使用-e参数去标记tcpdump的打印硬件地址:

图5.1 RARP请求和应答。 该RARP请求是广播(1号线)的,第2行的RARP应答是单播的。第2行的输出,“at sun”,意味着RARP应答包含了主机sun(140.252.13.33)的IP地址。 在第3行,我们看到,一旦sun接收其IP地址,它会发出一个TFTP读请求(RRQ)的文件8CFCOD21.SUN4C。(TFTP是简单文件传输协议,我们在第15章进行详细描述)。在文件名中的8个十六进制数字是sun主机的IP地址140.252.13.33的十六进制表示形式。这是在RARP应答中返回的IP地址。该文件名的其余部分,后缀SUN4C表示系统正在引导的类型。 Tcpdump表示第3行是一个长度为65的IP数据报,而不是一个UDP数据报(实际上它确实是),因为我们运行tcpdump命令使用-e参数,看硬件级别的地址。另一点,在图5.1要注意的是在第2行的以太网帧的长度似乎比最小较短(我们所说的是在4.5节60字节)。原因是我们的系统,该系统上运行的tcpdump 发送该以太网帧(BSDI)。该应用程序rarpd,写42字节到BSD分组过滤器装置(14字节的以太网报头和28字节的RARP应答),这是什么的tcpdump收到的副本。但以太网设备驱动程序垫这个短帧的最小尺寸为传输(60 )。如果我们在另一个系统上已经运行的tcpdump ,长度会是60。 我们可以看到在这个例子,当这种无盘系统接收在RARP应答它的IP地址,它会发出一个TFTP请求来读取一个引导映像。在这一点上,我们不会进入其他详细介绍无盘系统是如何引导自己。(第16章介绍了使用RARP ,BOOTP和TFTP无盘X终端的引导顺序。) 图5.2表示出了如果有在网络上没有RARP服务器所得到的数据包。每个数据包的目的地址为以太网的广播地址。以太网地址跟随的是目标硬件地址,并按照发送端的硬件地址发送。

上海海洋大学专业英语期末翻译

Analog computers are analog devices. That is, they have continuous states rather than discrete numbered states. An analog computer can represent fractional or irrational values exactly, with no round-off. Analog computers are almost never used outside of experimental settings. 模拟计算机是模拟设备。也就是说,他们是连续状态而不是离散的有限状态。一个模拟计算机可以精确代表小数或无理数,没有舍入。模拟计算机几乎从不被使用在实验设置以外。 A processor typically contains an arithmetic/logic unit (ALU), control unit( including processor flags, flag register, or status register), internal buses, and sometimes special function units( the most common special function unit being a floating point unit for floating point arithmetic). 一个处理器通常包含一个算术/逻辑单元(运算器),控制单元(包括处理器标志,标志寄存器,或状态寄存器),内部总线,有时特殊功能单元(最常见的特殊功能单元作为一个浮点单元用于浮点运算)。 CISC stands for Complex Instruction Set Computer. Mainframe computers and minicomputers were CISC processors, with manufacturers competing to offer the most useful instruction sets. Many of the first two generations of microprocessors were also CISC. CISC代表复杂指令集计算机。大型计算机和小型计算机是CISC处理器,与制造商竞争提供最有用的指令集。微处理器的前两代中许多也是CISC。 Lesson 2 Supercomputer is a broad term for one of the fastest computers currently available. Supercomputers are very expensive and are employed for specialized applications that require immense mounts of mathematical calculations (number crunching). 超级计算机是一个广泛的术语,因为它是目前可用的最快的计算机之一。超级计算机是非常昂贵的,并且它被用于需要大量的数学计算(数字运算)的专门应用。 It is a midsize computer. In the past decade, the distinction between large minicomputers and small mainframes has blurred, however, as has the distinction between small minicomputers and workstation. But in general, a minicomputer is a multiprocessing system capable of supporting up to 200 users simultaneously. 它是一个中型计算机。在过去的十年中,大的小型机和小的大型机之间的区别已经模糊,然而,有小的小型机和工作站之间的区别。但在一般情况下,一个小型机是一个能够同时支持多达200个用户的多处理系统。 Workstations generally come with a large, high-resolution graphics screen, a large amount of RAM, built-in network support, and a graphical user interface. Most workstations also have a mass storage device such as disk drive, but a special type of workstation, called a diskless workstation, comes without a disk drive. 工作站一般都配有一个大的,高分辨率的图形屏幕,大量的内存,内置网络支持以及一个图形用户界面。大多数工作站也有一个大容量存储设备如磁盘驱动器,但是一种特殊类型的工作站,被称为无盘工作站,是不带磁盘驱动器的。

电子商务专业英语作业翻译

E-commerce (electronic commerce or EC) is the buying and selling of goods and services on the Internet, especially the World Wide Web. In practice, this term and a newer term, e-business, are often used interchangably. For online retail selling, the term e-tailing is sometimes used. 电子商务(电子商务或电子商务)是购买和出售的商品和服务在互联网,特别是万维网上的。在实践中,这项和一个新的术语,电子商务,往往交替使用。网上零售,电子零售的术语有时用。 E-tailing or The Virtual Storefront and the Virtual Mall 网上或虚拟商店和虚拟商店 As a place for direct retail shopping, with its 24-hour availability, a global reach, the ability to interact and provide custom information and ordering, and multimedia prospects, the Web is rapidly becoming a multibillion dollar source of revenue for the world's businesses. A number of businesses already report considerable success. As early as the middle of 1997, Dell Computers reported orders of a million dollars a day. By early 1999, projected e-commerce revenues for business were in the billions of dollars and the stocks of companies deemed most adept at e-commerce were skyrocketing. Although many so-called dotcom retailers disappeared in the economic shakeout of 2000, Web retailing at sites such as https://www.360docs.net/doc/837069739.html,, https://www.360docs.net/doc/837069739.html,, and https://www.360docs.net/doc/837069739.html, continues to grow. 作为一个直接的零售购物,其24小时供应,全球性的,互动的能力,并提供自定义信息和订购,和多媒体,网络正在迅速成为一个数十亿美元的收入来源,为全球的企业。一些企业已报告了相当大的成功。早在1997年年中,戴尔电脑报告的订单一百万美元一天。1999年初,预计的电子商务业务收入都在数十亿美元的股票和公司认为最善于电子商务暴涨。虽然许多所谓的互联网零售商消失在经济衰退2000,网上零售网站如https://www.360docs.net/doc/837069739.html,,https://www.360docs.net/doc/837069739.html,,和https://www.360docs.net/doc/837069739.html,继续增长 Market Research 市场研究 In early 1999, it was widely recognized that because of the interactive nature of the Internet, companies could gather data about prospects and customers in unprecedented amounts -through site registration, questionnaires, and as part of taking orders. The issue of whether data was being collected with the knowledge and permission of market subjects had been raised. (Microsoft referred to its policy of data collection as "profiling" and a proposed standard has been developed that allows Internet users to decide who can have what personal information.) Electronic Data Interchange (EDI)

(完整版)机械工程专业英语词汇

陶瓷ceramics 合成纤维synthetic fibre 电化学腐蚀electrochemical corrosion 车架automotive chassis 悬架suspension 转向器redirector 变速器speed changer 板料冲压sheet metal parts 孔加工spot facing machining 车间workshop 工程技术人员engineer 气动夹紧pneuma lock 数学模型mathematical model 画法几何descriptive geometry 机械制图Mechanical drawing 投影projection 视图view 剖视图profile chart 标准件standard component 零件图part drawing 装配图assembly drawing 尺寸标注size marking 技术要求technical requirements 刚度rigidity 内力internal force 位移displacement 截面section 疲劳极限fatigue limit 断裂fracture 塑性变形plastic distortion 脆性材料brittleness material 刚度准则rigidity criterion 垫圈washer 垫片spacer 直齿圆柱齿轮straight toothed spur gear 斜齿圆柱齿轮helical-spur gear 直齿锥齿轮straight bevel gear 运动简图kinematic sketch 齿轮齿条pinion and rack 蜗杆蜗轮worm and worm gear 虚约束passive constraint 曲柄crank 摇杆racker 凸轮cams

机械工程专业英语翻译合集

1.我们可以把钢再次加热到临界温度以下的某一温度,然后在慢慢让其冷却。We can heat the steel again to a temperature below the critical temperature, then cool it slowly. 2.无论任何简单的机床,都是由单一元件即通称为机械零件或部件组成的。However simple, any machine is a combination of individual components generally referred to as machine elements or parts. 3.这些金属不都是好的导体。 All these metals are not good conductors. 4. 在做带电实验的时候,再怎么小心都不为过。 You can't be too careful in performing an experiment. 5.利用发电机可以把机械能转变成电能。 The mechanical energy can be changed back into electrical energy by means of a generator or dynamo. 6.假定电源输入的电压保持不变。 Assume that the voltage input of the power supply remains the same. 7.化石燃料是发电过程中最为频繁使用的能源。 Fossil fuels are most frequently used source daring the power generation process. 8单个机械零件的可靠性成为评估整台机器使用寿命的基本因素。 The individual reliability of machine elements becomes the basis for estimating the overall life 9.说我们生活在一个电子时代,这一点都不夸张。 It's no exaggeration to say that we live in an electronic age. 10.发动机的转速不应超过最大允许值。 Engine revolution should not exceed the maximum permissible. 11.如能从大型核电站获得成本极低的电力,电解氢的竞争能力就会增强。(Electrolytic hydrogen)。 If extremely low-cost power were ever to become available from large nuclear power plants, electrolytic hydrogen would become competitive. 12.电子技术提供了一种新的显示时间的方法。 A new way of displaying time has been given by electronics. 13.远距离输电需要高压,安全用电需要低压。 High voltage is necessary for long transmission line while low voltage for safe use. 14.铝的电阻大约是同等尺寸的铜的1.5倍。 The resistance of aluminum is approximately half again as great as that of copper for the same dimensions = size 15.In fact,it is impossible for no force to be exerted on a body,since in this world everything is subject to the for ce of gravity. 事实上,物体不受外力作用是不可能的,因为在这个世界上任何物体都要受到重力的作用。 16.In a thermal power plant,all the chemical energy is not

专业英语翻译作业译文

专业英语翻译作业译文 1.科学家们认为,这样微弱的粒子正则轨道实际上是不存在的。的想法现在已被事实否定了。 2.虽然小行星很小很微弱,天文学家已经知道很多关于它们的大小,形状和组合物,通过使用各种直接和间接的技术。例如,它是已知的许多小行星的亮度的周期性变化。 3.随着疾病的进展,大肌肉也稳步增长疲软。如果不治疗,患者变得瘫痪有呼吸非常困难,并最终死亡。 4.将信息从计算机的一部分转移到另一个取决于电流进行了线。 5.只有两件事是天文观测----站立的地方和地方看需要。 6.太阳风严重扭曲地球磁场,把它拖了一个长长的尾巴。 7.使用计算机,我们组成了一系列的合成歌曲的混合自然音节为不同的模式。 8.苍头燕雀的显示,找出正确的声音模仿的本能,这表明本能学习鸟类作为他们发展他们的歌曲一样重要。 9.We know from the fossil record that our ancestors and other intelligent creatures,the australopithecines,branched off from an apelike creature 2.5 million to 3 million years ago ,and coexisted until the australopithecines died out a little less than a million years ago.Stone tools and other evidence at campsites that date form about 2,000,000 B.C.indicate that some form of australopithecine performed human activities ------ making tools,sharing food and working together. 我们知道从化石记录我们的祖先和其他智能生物,猿,分枝从远古的生物2500000到3000000年前,南方古猿和共存直到死了比一百万年前少了一点。石器和露营地,日期约2000000 b.c.表明某种形式的南方古猿表现人类活动------制作工具的其他证据,分享食物,一起工作。 10.properties of metals Metals are of great use to mankind because of their useful engineering properties. Strength is one of the important properties of metals .It enables them to resist external loads without incurring structural damages.Metals, possessing toughness, a property of absorbing considerable energy before fracture,bend rather than break. Another property of metals is elasticity.Because of their elasticity,metals subjected to an external load are distorted or stained, and return to their original dimensions when the load is released if the load is not too great. Ductility is the capacity of a metal to be permanently deformed in tension without breaking. That is why some metals, such as copper and aluminum, can be drawn erom a large into a smaller diameter of wire.

《专业英语》课程作业

步京侄宛a琴 《专业英语》课程作业 学生姓名____________________________ 学号 __________________________ 院系 _________________________ 专业 __________________________ 任课教师____________________________

二0一五年六月 一、英译中(英文科技资料翻译) 原文: An operating system is the software which acts as an interface between a user of a computer and the computer hardware.The purpose of an operating system is to provide an environment in which a user may execute program. The primary goal of an operating system is thus to make the computer system convenient to use. A secondary goal is to use the computer hardware in an efficient way. We can view an operating system as a resource allocator. A computer system has many resources which may be required to solve a problem: CPU time, memory space, , input/output(I/O) devices, and so on.The operating system acts as the manager of these resources and allocates them to specific programs and users as necessary for their tasks. Since there may be many, possibly conflicting, requests for resources, the o/s must decide which requests are allocated resources to operate the computer system fairly and efficiently. Multimedia means, from the user ' perspective, that computer information can be represented through audio and/or video, in addition to text, image, graphics and animation . The integration of these media into the computer provides additional possibilities for the use of computational power currently available (e.g., for interactive presentation of huge amounts of information ). Furthermore, these data can be transmitted though computer and telecommunication networks, which implies applications in the areas of information distribution and cooperative work.Multimedia provides the possibility for a spectrum of new applications, many of which are in place today. A multimedia system distinguishes itself from other systems through several properties. We elaborate on the most important properties such as combination of the media, media-independence, computer control and integration.Not every arbitrary combination of media justifies the usage of the term multimedia. A simple text processing program with incorporated images is often called a multimedia application because two media are processed through one program.But one should talk about multimedia only when both continuous and discrete media are utilized.A text processing program with incorporated images is therefore not a multimedia application. An important aspect of different media is their level of independence from each other. In general, there is a request for independence of different media, but multimedia may require several levels of independence. On the one hand, a computer-controlled video recorder stores audio and video information, but there is an inherently tight connection between the two types of media. Both media are coupled together through the common storage medium of the tape. On the other hand, for the purpose of presentations, the combination of DAT recorder (Digital Audio Tape) signals and computer-available text satisfies the request for media-independence. Early computers were(physically) very large machines run from a console.The programmer would

机械工程专业英语 翻译

2、应力和应变 在任何工程结构中独立的部件或构件将承受来自于部件的使用状况或工作的外部环境的外力作用。如果组件就处于平衡状态,由此而来的各种外力将会为零,但尽管如此,它们共同作用部件的载荷易于使部件变形同时在材料里面产生相应的内力。 有很多不同负载可以应用于构件的方式。负荷根据相应时间的不同可分为: (a)静态负荷是一种在相对较短的时间内逐步达到平衡的应用载荷。 (b)持续负载是一种在很长一段时间为一个常数的载荷, 例如结构的重量。这种类型的载荷以相同的方式作为一个静态负荷; 然而,对一些材料与温度和压力的条件下,短时间的载荷和长时间的载荷抵抗失效的能力可能是不同的。 (c)冲击载荷是一种快速载荷(一种能量载荷)。振动通常导致一个冲击载荷, 一般平衡是不能建立的直到通过自然的阻尼力的作用使振动停止的时候。 (d)重复载荷是一种被应用和去除千万次的载荷。 (e)疲劳载荷或交变载荷是一种大小和设计随时间不断变化的载荷。 上面已经提到,作用于物体的外力与在材料里面产生的相应内力平衡。因此,如果一个杆受到一个均匀的拉伸和压缩,也就是说, 一个力,均匀分布于一截面,那么产生的内力也均匀分布并且可以说杆是受到一个均匀的正常应力,应力被定义为 应力==负载 P /压力 A, 因此根据载荷的性质应力是可以压缩或拉伸的,并被度量为牛顿每平方米或它的倍数。 如果一个杆受到轴向载荷,即是应力,那么杆的长度会改变。如果杆的初始长度L和改变量△L已知,产生的应力定义如下: 应力==改变长△L /初始长 L 因此应力是一个测量材料变形和无量纲的物理量 ,即它没有单位;它只是两个相同单位的物理量的比值。 一般来说,在实践中,在荷载作用下材料的延伸是非常小的, 测量的应力以*10-6的形式是方便的, 即微应变, 使用的符号也相应成为ue。 从某种意义上说,拉伸应力与应变被认为是正的。压缩应力与应变被认为是负的。因此负应力使长度减小。 当负载移除时,如果材料回复到初始的,无负载时的尺寸时,我们就说它是具有弹性的。一特定形式的适用于大范围的工程材料至少工程材料受载荷的大部分的弹性, 产生正比于负载的变形。由于载荷正比于载荷所产生的压力并且变形正比于应变, 这也说明,当材料是弹性的时候, 应力与应变成正比。因此胡克定律陈述, 应力正比于应变。 这定律服从于大部分铁合金在特定的范围内, 甚至以其合理的准确性可以假定适用于其他工程材料比如混凝土,木材,非铁合金。 当一个材料是弹性的时候,当载荷消除之后,任何负载所产生的变形可以完全恢复,没有永久的变形。

相关文档
最新文档