国内外石油化工行业行业标准对照表中英文对照

1)Please find attached the list of international codes and standards to be applied for the design and manufacturing of the whole supply (doc n. 0002-00-00-000-B-G-1-43-002)

随函附上全部供应材料设计和制造中应用的国际规范和标准一览表（文件号0002-00-00-000-B-G-1-43-002）。

Please kindly confirm compliance; moreover, please confirm that it is already included in your quotation or update accordingly.

请确认符合情况，此外，请确认其已相应包含在贵方报价或更新文件中。

2)ASTM / ASME standard Materials with proper certifications (refer to attached material certificate EN 10204

3.1 samples) shall be provided for the whole supply materials; equivalent Chinese standard material are not accepted by our Client (except the ones listed in the attached doc n. 0002-00-00-000-B-G-1-43-002 section 3).

应为全部材料提供ASTM/ ASME标准材料和适当的认证（参考随附的材料证书EN 10204 3.1），我们的客户不接受同等的中国标准材料（随附文件号0002-00-00-000-B-G-1-43-002第3节列出的材料除外）。

Please kindly confirm compliance; moreover, please confirm that it is already included in your quotation or update accordingly.

请确认符合情况，此外，请确认其已相应包含在贵方报价或更新文件中。

(See attached file: 0002-00-00-000-B-G-1-43-002_D.doc) (See attached file:material test certificates samples. rar) （参考随附文件：0002-00-00-000-B-G-1-43-002_D.doc）（参考随附文件：材料测试证书样本.rar）

LIST OF APPLICABLE INTERNATIONAL / NATIONAL CODES AND STANDARD S

适用的国际/国家规范和标准一览表

INDEX（检索）

Page（页码）1.International Standards (Foreign Standards internationally acknowledged) 3

1. 国际标准（国际公认的国外标准） 3

2.National Standards of other countries referenced to International Standards and acknowledge by

Cuban Authorities 41

2.其他国家参照国际标准并由古巴当局认可的国家标准41

3.National Standards of other countries not referenced to International Standards and not

acknowledge by Cuban Authorities (Chinese standard) 48 3.其他国家未参照国际标准且未被古巴当局认可的国家标准（中国标准）48

1. International Standards (Foreign Standards internationally acknowledged)

1.国际标准（国际公认的国外标准）

AASHTO - American Association of State Highway and Transportation Officials

AASHTO—美国国家公路与运输协会

GDPS-4-M Guide for Design of Pavement Structures

路面结构设计指南

AASHTO Bridge Design Specifications

桥梁设计规范

M145 Classification System for Soil

土壤分类系统

M226 Viscosity Graded Asphalt Cement

粘度级沥青胶合剂

T166 Bulk Specific Gravity of Compacted Bituminous Mixtures

压实沥青混合料毛体积比重

ACI - American Concrete Institute

ACI-美国混凝土学会

117 Standard Specifications for Tolerances for Concrete Construction and

Materials

混凝土施工与材料公差的标准规格

207.1R Mass Concrete

大体积混凝土

211.1 Standard Practice for Selecting Proportions for Normal, Heavyweights, and

Mass Concrete

常规、重型和大体积混凝土选择比例标准规程

223 Standard Practice for the Use of Shrinkage-Compensating Concrete

收缩补偿混凝土使用标准规程

301 Specifications for Structural Concrete for Buildings

建筑用结构混凝土规格

302.1R Guide for Concrete floor and slab constructions

混凝土地面和平板结构指南

304.1R Guide for the use of Pre-placed Aggregate Concrete for Structural and Mass Concrete Applications

结构和大体积混凝土应用预填骨料混凝土使用指南

304.2R Placing concrete by pumping methods

用泵送方法浇筑混凝土

304.3R Heavyweight Concrete: Measuring, Mixing, Transporting, and Placing 重混凝土：计量、搅拌、运输及配售

304.4R Placing Concrete with Belt Conveyors 配售混凝土带式输送机

304.5R Batching, Mixing, and Job Control of Lightweight Concrete 轻质混凝土配料、混合及作业控制

304.6R Guide for the Use of Volumetric–Measuring and Continuous–Mixing Concrete Equipment

容积计量和连续搅拌混凝土设备使用指南

304R Guide for Measuring, mixing, transporting, and placing concrete

计量、搅拌、运输及配售混凝土指南

305R Hot weather concreting

夏季浇筑混凝土

306R Cold weather concreting

冬季浇筑混凝土

308 Standard practice for curing concrete

养护混凝土标准规程

309R Guide for Consolidation of Concrete

318 Building Code Requirements for Reinforced Concrete

钢筋混凝土建筑规范要求

347 Formwork for Concrete 混凝土用模板

350 Standard Engineering Practice for Environmental Structures

环境结构标准工程规程

439.3R Mechanical Connections of Reinforcing Bars

配筋机械连接

506.2 Specification for Shotcrete

喷浆混凝土规范

SP-66 ACI Detailing Manual

美国混凝土学会详细手册

AI - Asphalt Institute

AI-美国沥青协会

MS-2 Design Method for Asphalt Concrete and other Hot-Mix Types

沥青混凝土及其他热拌类型设计方法

MS-4 Asphalt Handbook

沥青手册

SS-1 Model Construction Specifications for Asphalt Concrete and Other Plant-Mix

Types

沥青混凝土及其他厂拌类型模型建构规范

SS-2 Specifications for Pavings and Industrial Asphalt

铺面材料和工业沥青规范

AISC - American Institute of Steel Construction

AISC-美国钢结构学会

303 Code of Standard Practice for Steel Buildings and Bridges

钢结构建筑和桥梁标准规程规范

348 Specification for Structural Joints using High strength bolts

使用高强度螺栓的结构缝规范

360 Specification for Structural Steel Buildings

钢结构建筑规范

AISI - American Iron and Steel Institute

AISI-美国钢铁学会

4140Alloy Steel Plates

合金钢板

ANSI - American International Standards Institute

ANSI-美国国家标准学会

ANSI/FCI 70-2 Control Valves Seat Leakage

控制阀门座泄露

ANSI/ISA MC-96.1 Temperature Measurement Thermocouples

温度测量热电偶

ANSI/TIA-568-C.1 General Requirements

通用要求

ANSI/TIA-568-C.3 Optical Fibre Cabling Component Standard

光纤布线组件标准

ANSI-J-STD-607-A Grounding and Bonding Requirements for Telecommunications in

Commercial Buildings

商用建筑物的电信接地和连接安全性要求

ANSI/NSC Z16.5 Occupational Safety and Health Incident Surveillance - Now Copyrighted by

NSC

职业安全及健康事件监控——现版权归美国安全委员会所有

ANSI Z400.1/Z129.1-2010 Hazardous Workplace Chemicals – Hazard Evaluation and Safety Data Sheet

and Precautionary Labeling Preparation

工作场所危险化学品–危害评估和安全数据表和预防标签准备标准

API - American Petroleum Institute API-美国石油学会

API 2C VI Ed. API 2C第6版Specification for Offshore Pedestal Mounted Cranes 近岸支座式起重机规范

API 5L IV Ed. API 5L第4版Specification for Line Pipe 线管规范

API 6D XX Ed. API 6D第20版Specification for Pipeline Valves (Gate, Plug, Ball and Check Valves) 管道阀门（闸阀、插头、球阀和止回阀）规范

API 510 Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and

Alteration

(Note: only for the existing pressure vessel that will be reused)

压力容器检验规范：运行中检查、评级、修复和改造

（注：仅适用于将重新利用的现有压力容器）

API 520 Part 1 - VIII Ed. API 520第1部分-第8版Sizing, Selection, and Installation of Pressure-relieving Devices in Refineries Part I - Sizing and Selection - EIGHTH EDITION

炼油厂泄压装置的尺寸确定、选择和安装

第1部分—设置和选择—第八版

API RP 520 Part 2 - V Ed. API RP 520第2部分-第5版Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries Part II—Installation - Fifth Edition

炼油厂泄压装置的尺寸确定、选择和安装

第2部分—安装—第五版

API 521 V Ed. API 521第5版Press. Relieve and Depr. System 泄压和减压系统

API 526 VI Ed. API 526第6版Flanged Steel Pressure Relief Valves 钢制法兰连接泄压阀

API 527 III Ed. API 527第3版Commercial Seat Tightness of Safety Valves with Metal to Metal Seats 带金属与金属连接阀座的安全阀的商业阀座气密性

API 530 VI Ed. API 530第6版Calculation of Heater-tube Thickness in Petroleum Refineries 炼油厂中加热器管厚度的计算

API 537 II Ed. API 537第2版Flares 照明弹

API 560 IV Ed. API 560第4版Fired Heaters for General Refinery Services 炼油厂通用燃料加热器

API 594 VII Ed. API 594第7版Check Valves: Wafer, Wafer-Lug and Double Flanged Type 止回阀：盘式、盘式—凸耳及双法兰式

API 598 IX Ed. API 598第9版Valve Inspection and Testing 阀门检验和测试

API 599 VI Ed. API 599第6版Plug Valve 旋塞阀

API 600 XII Ed. API 600第12版Steel Gate Valves Flanged and Butt Welding Ends 连接钢制闸阀法兰和对焊端部

API 602 IX Ed. API 602第9版Compact Steel Gate Valve 紧凑型钢制闸阀

API 603 VII Ed. API 603第7版Corrosion-resistant, Bolted Bonnet Gate Valves – Flanged and Butt-welding Ends

耐腐蚀螺栓连接阀盖闸阀－法兰端和焊接端

API 607 VI Ed. API 607第6版Fire Test for Soft-Seated Quarter Turn Valves 软座式直角回转阀的防火试验

API 608 IV Ed. API 608第4版Metal Ball Valves - Flanged and Butt-Welding Ends 金属球阀—法兰端和焊接端

API 609 VII Ed. API 609第7版Butterfly Valves: Double Flanged, Lug and Wafer Type 双法兰连接、凸耳及饼式蝶阀

API 610 X Ed. API 610第10版Centrifugal Pumps for General Refinery Services 炼油厂通用离心泵

API 611 IV Ed. API 611第4版General Purpose Steam Turbine for Refinery Services 炼油操作用一般用途蒸汽透平机

API 612 VI Ed. API 612第6版Special Purpose Steam Turbine for Refinery Services 炼油操作用特殊用途蒸汽透平机

API 613 V Ed. API 613第5版Special Purpose Gear Units 特殊用途齿轮装置

API 614 V Ed. API 614第5版Lubrication, Shaft-sealing and Oil-control Systems and Auxiliaries 润滑、轴密封和控制油系统及辅助设备

API 617 VII Ed. API 617第7版Axial and Centrifugal Compressors and Expander-compressors 轴流和离心压缩机及膨胀机-压缩机

API 618 V Ed. API 618第5版Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services

石油、化学和气体工业用往复式压缩机

API 619 IV Ed. API 619第4版Rotary-type Positive Displacement Compressors for General Refinery Services

炼油厂通用旋转式容积式压缩机

API 620 XI Ed. API 620第11版Design and Construction of Large, Welded, Low-Pressure Storage Tanks 大型低压焊接储油罐的设计与施工

API 650 XI Ed. API 650第11版Steel Welded Tanks for Oil Storage 钢制焊接油罐

API 653 Tank Inspection, Repair, Alteration, and Reconstruction

(Note: only for the existing tanks that will be reused)

油罐检测、修理、改造和重建

（注：仅适用于将重新利用的现有油罐）

API 660 VIII Ed API 660第8版. Shell and Tube Heat Exchangers for General Refinery Services 炼油厂通用管壳式换热器

API 661 VI Ed. API 661第6版Air Cooled Heat Exchangers for General Refinery Services 炼油厂通用空冷式热换器

API 662 Plate Heat Exchangers for General Refinery Service

炼油厂通用板式换热器

API 662 Part 1 - I Ed. API 662第1部分-第1版Plate and Frame Heat Exchangers 板式及框架式换热器

API 662 Part 2 – I Ed. API 662第2部分-第1版Brazed Aluminium Plate-fin Heat Exchangers 钎焊铝板翅式换热器

API 670 IV Ed. API 670第4版Machinery Protection System 机械保护系统

API 671 IV Ed. API 671第4版Special-Purpose Couplings 专用联轴器

API 672 IV Ed. API 672第4版Packaged, Integrally Geared Centrifugal Air Compressors 组装型整体齿轮增速离心式空气压缩机

API 673 II Ed. API 673第2版Centrifugal Fan 离心通风机

API 674 II Ed. API 674第2版Positive Displacement Pumps – Reciprocating 容积式往复泵

API 675 II Ed. API 675第2版Positive Displacement Pumps – Controlled V olume 容积式可控制排量泵

API 676 III Ed. API 676第3版Positive Displacement Pumps – Rotary 容积式转子泵

API 677 III Ed. API 677第3版General-Purpose Gear Units for Petroleum, Chemical and Gas Industry Services

石油、石化和天然气工业用一般用途齿轮装置

API 681 I Ed. API 681第1版Liquid Ring Vacuum Pumps and Compressors 液环真空泵和压缩机

API 682 III Ed. API 682第3版Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps 泵—离心泵转子泵用轴密封系统

API 685 II Ed. API 685第2版Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Process Service

石油、石化和天然气工业用无密封式离心泵

API 686 II Ed. API 686第2版Recommended Practices for Machinery Installation and Installation Design 机械设备安装和安装设计建议惯例

API 1104 XX Ed. API 1104第20版Welding of Pipelines and Related Facilities 管道及附件焊接

API 1130 Computational Pipeline Monitoring 计算管道监测

API 1155 Evaluation Methodology for Software Based Leak Detection Systems 基于管道泄露检测系统软件的评估方法论

API 2000 VI Ed. API 2000第6版Venting Atmospheric and Low-pressure Storage Tanks 排气大气和低压储油罐

API 2218 II Ed. API 2218第2版Fireproofing Practices in Petroleum and Petrochemical Processing Plant 石油和石化加工厂的防火措施

API 2510 VIII Ed. API 2510第8版Design and Construction of LPG Installations 液化石油气设施的设计与施工

API 2510 A II Ed. API 2510 A第2版Fire-Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Storage Facilities

设计和操作液化石油气（LPG）储存设备的防火事项

API 2534 I Ed. API 2534第1版Measurement of Liquid Hydrocarbons by Turbine Meter Systems 涡轮流量计系统测量液态烃

API RP 2A WSD – XXI Ed. API RP 2A WSD第21版Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design

海上固定平台规划、设计和建造的推荐作法—工作应力设计法

API RP 2D VI Ed. API RP 2D第6版Operation and Maintenance of Offshore Cranes 海上平台起重机使用与维护

API RP 6HT Heat Treatment and Testing of Large Cross Section and Critical Section Components

大断面和关键部件的热处理和测试

API RP-505 I Ed. API RP-505第1版Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2

以1级、0区、1区和2区分类的石油装置用电气设备位置分类的推荐实施规程

API RP-535 II Ed. API RP-535第2版Burners 燃烧器

API RP-551 I Ed. API RP-551第1版Process Measurement Instrumentation 过程测量仪表

API RP-552 I Ed. API RP-552第1版Transmission System 传输系统

API RP-553 I Ed. API RP-553第1版Refinery Control Valves 炼油厂控制阀

API RP-554 Part 1 – II Ed. API RP-554第1部分-第2版Process Control Systems Part 1—Process Control Systems Functions and Functional Specification Development - SECOND EDITION

过程控制系统：第1部分—功能和功能规格发展的过程控制系统—第二版

API RP-554 Part 2 – I Ed. API RP-554第2部分-第1版Process Control Systems— Process Control System Design - First Edition 过程控制系统—过程控制系统设计—第一版

API RP-554 Part 3 – I Ed. API RP-554第3部分-第1版Process Control Systems—Project Execution and Process Control System Ownership - First Edition

过程控制系统—项目执行和过程控制系统所有权—第一版

API RP-555 II Ed. API RP-555第2版Process Analysers (in press) 过程分析仪（印刷中）

API RP-556 II Ed. API RP-556第2版Instrumentation & Control System for Fired Heaters and Steam Generation 发射热水器和蒸汽发生器的仪表和控制系统

API RP-557 I Ed. API RP-577第1版Guide to Advanced Control Systems 高级控制系统指南

API RP-571 I Ed. API RP-571第1版Damage Mechanisms Affecting Fixed Equipment in the Refining Industry 影响炼油工业中固定设备的损伤机理

API RP-621 III Ed. API RP-621第3版Reconditioning of Metallic Gate, Globe, and Check Valves 金属闸阀、截止阀和止回阀的重新调整

API RP 752 III Ed. API RP 752第3版Management of Hazards Associated with Location of Process Plant Permanent Buildings

与加工厂永久性建筑位置相关的危险管理

API RP-934-A II Ed. API RP-934-A第2版Low Alloy steel Heavy Wall in high Temperature and Pressure for Hydrogen Service

应用于高温高压氢工况的低合金钢的厚壁

API TR-934-B II Ed. API RP-934-B第2版Low Alloy steel Vanadium modified for Heavy Wall Pressure Vessels 为厚壁压力容器修改的低合金钢钒

API RP-934-C II Ed. API RP-934-C第2版Low Alloy steel Heavy Wall Pressure Vessels for High Pressure service Operating at or below 441°C

应用于高温高压工况操作温度不高于441°C的低合金钢厚壁压力容器

API TR-938-C I Ed. API TR-938-C第1版Use of Duplex Stainless Steel in the Oil Refinery Industry 石油提炼工业中双相不锈钢的使用

API RP-939-C I Ed. API RP-939-C第1版Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil Refineries

石油炼厂避免硫化腐蚀失效指南

API RP-941 VII Ed. API RP-941第7版Steel for Hydrogen Service at Elevated Temperature and Pressures in Petroleum Refinery and Petrochemical Plants

炼油厂和石油化工厂高温高压下氢气设备用钢

API RP-945 III Ed. API RP-945第3版Avoiding Environmental Cracking in Amine Units 避免环境因胺元素而分裂

API RP-1102 VII Ed. API RP-1102第7版Steel Pipelines Crossing Railroads and Highways 钢制管道穿越铁路和公路

API RP 1110 Recommended Practice for Pressure Testing of Liquid Petroleum Pipelines 液体石油管道压力试验推荐作法

API RP-1111 IV Ed. API RP-1111第4版Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design)

碳氢化合物海底管道设计、建设、运行和维修（极限状态设计）

API RP-2001 VIII Ed. API RP-2001第8版Fire Proofing Practices in Petroleum and Petrochemical Processing Plants 石油和石化加工厂防火作法

API RP-2028 III Ed. API RP-2028第3版Flame Arresters in Piping Systems 管道系统阻火器

API RP-2030 III Ed. API RP-2030第3版Application of Fixed Water Spray Systems for Fire Protection in the Petroleum Industry

石油工业消防用固定喷水系统的应用

API RP-2210 III Ed. API RP-2210第3版Flame Arresters for Vents of Tanks Storing Petroleum Products 储存石油产品储罐通风口用阻火器

ASCE - American Society of Civil Engineering

ASCE-美国土木工程师协会

ASCE 7 Minimum Design Loads for Buildings & other Structures

建筑和其它结构的最小设计载荷

ASCE 15 – 98 Buried Concrete Pipes

地下混凝土管

--- Design Blast Resistant Buildings in petrochemical Plants

石化厂设计防爆建筑

ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers ASHRAE-美国采暖、制冷与空调工程师学会

--- ASHRAE Handbook

ASHRAE手册

ASME - American Society of Mechanical Engineers

ASME-美国机械工程师协会

ASME B1.1 Unified inch screw threads

统一英制螺纹

ASME B1.13M Metric Screw Threads

米制螺纹

ASME B1.20.1 Pipe threads, General purpose

通用管螺纹

ASME B16.1 Cast Iron Pipe, Flanges and Flanged Fittings

铸铁管、法兰和法兰配件

ASME B16.3 Malleable Iron Threaded Fittings

可锻铸铁螺纹管件

ASME B16.5 Pipe Flanges and Flanged Fittings

管法兰和法兰管件

ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves

阀门的面对面及端对端尺寸

ASME B16.11 Forged Steel Fittings, Socket-Welding and Threaded

锻钢件、承插焊和螺纹

ASME B16.14 Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads

钢铁制管螺塞、衬套和防松螺母

ASME B16.20 Metallic Flat Gaskets for Pipe Flanges

管法兰用金属平垫片

ASME B16.21 Non metallic Flat Gaskets for Pipe Flanges

管法兰用非金属平垫片

ASME B16.25 Butt Welding Ends

对焊端部

ASME B16.34 Valves – Flanged, Threaded and Welding End

法兰,螺纹和焊接端连接的阀门

ASME B16.36 Steel Orifice Flanges

钢孔板法兰

ASME B16.42 Ductile Iron Pipe, Flanges and Flanged Fittings

球墨铸铁管、法兰和法兰管件

ASME B16.47 Large diameter steel flanges

大直径管钢制法兰

ASME B16.48 Steel Line Blanks

空白钢衬

ASME B16.49 Factory-made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems

传输和分配系统用工厂预制锻钢对焊感应管弯头

ASME B16.5 Pipe Flanges and Flanged Fittings NPS ? trough 24

管法兰和法兰配件美国标准直管螺纹?槽24

ASME B16.9 Factory-Made Wrought Steel Buttwelding Fittings

工厂制造的锻轧制对焊管配件

ASME B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex

Flange, Lobed Head, and Lag Screws (Inch Series)

四角螺栓、六角螺栓、六角重型螺栓、歪头螺栓及六角螺钉、六角重型

螺钉、六角法兰螺钉、裂头螺钉、方头螺钉（英制系列）

ASME B18.2.2 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex

Flange, and Coupling Nuts (Inch Series)

通用螺母：机械螺丝用螺母、六角螺母、四角螺母、六角法兰螺母、联

接螺母（英制系列）

ASME B18.2.3.7M Metric Heavy Hex Structural Bolts

米制重六角形结构螺栓

ASME B18.2.4.6M Metric Heavy Hex Nuts

米制重型六角螺母

ASME B.30.2 Overhead and Gantry Cranes

桥式及门式起重机

ASME B.30.3 Hammerhead Tower Cranes

锤头塔式起重机

ASME B.30.4 Portal, Tower and Pillar Cranes

门式、塔式和柱式起重机

ASME B.30.5 Mobile and Locomotive Cranes

汽车起重机和机车起重机

ASME B.30.6 Derricks

桅杆起重机

ASME B.30.8 Floating Cranes and Floating Derricks

浮式起重机和浮式桅杆起重机

ASME B.30.14 Side Boom Tractors

侧臂式拖拉机

ASME B.30.16 Overhead Hoists

高架悬挂提升机

ASME B.30.22 Articulating Boom Cranes

活节悬臂起重机

ASME B31.1 Power Piping

动力管道

ASME B31.3 Process Piping

工艺管道

APPENDIX P to B31.3 附录P至B31.3 Alternative Rules for Evaluation Stress Range 评价应力范围的替代原则

APPENDIX S to B31.3 附录S至B31.3 Piping System Analysis Example 管道系统分析实例

ASME B31.4 Piping Transportation System for Liquid Hydrocarbons and other Liquids

液态烃和其他液体管线输送系统

ASME B31.8 Gas Transportation and Distribution Piping System

气体输送和分配管道系统

ASME B36.10 Welded and seamless wrought Steel Pipe

焊接和无缝轧制钢管

ASME B36.10M Welded and Seamless Wrought Steel Pipe

焊接和无缝轧制钢管

ASME B36.19M Stainless Steel Pipe

不锈钢管

ASME B73.1 Specification for Horizontal End Suction Centrifugal Pumps for Chemical

Process (Not applicable for API service)

化学流程用卧式轴向吸入离心泵技术规范（不适用于API服务）

ASME PTC 10 Performance Test Code on Compressors and Exhausters

压缩机和排气动力试验规程

ASME PTC 19.3 Part 3 – Temperature Measurement Instruments and Apparatus

第3部分—温度测量仪器及器具

ASME PTC 2 Definitions and Values Performance Test Codes

定义和数值性能试验规程

ASME PTC 22 Performance Test Code on Gas Turbines

燃气轮机性能试验规程

ASME PTC 4 Performance Test code for Fired Steam Generators

燃煤蒸汽发生器性能试验规程

ASME PTC 6 Performance Test Code on Steam Turbines

汽轮机性能试验规程

ASME Section I ASME第1节Rules for Construction of Power Boilers 动力锅炉施工规则

ASME Section II ASME第2节Materials 材料

ASME Section IX ASME第9节Welding and Brazing Qualifications 焊接和钎焊条件

ASME Section V ASME第5节Non Destructive Examinations 无损检查

ASME Section VIII Div.1 ASME第8节第1小节Rules for Construction of Pressure Vessels 压力容器施工规则

ASME Section VIII Div.2 ASME第8节第2小节Rules for Construction of Pressure Vessels (alternative) 压力容器施工规则（替代）

ASME STS 1 Steel Stacks

钢制竖管

TEMA 9th Edition TEMA第9版Standards of the Tubular Exchanger Manufacturers Association 管式换热器制造商协会标准

ASNT - American Society for Nondestructive Testing (NDT) ASNT-美国无损检测（NDT）学会

ASNT CP189 Qualification and Certification of Nondestructive Testing Personnel 无损检测人员技术资格鉴定

ASSE – American Society of Safety Engineers

ASSE-美国安全工程师学会

A10.4 Safety Requirements

安全要求

ASTM - American Society for Testing and Materials ASTM-美国试验材料学会

V ol 01.01 01.01卷Steel-Piping, Tubing, Fittings 钢管、管材、管件

V ol 01.02 01.02卷Ferrous Castings; Ferroalloys 有色金属铸件；铁合金

V ol 01.03 01.03卷Steel-Plate, Sheet, Strip, Wire; Stainless Steel Bar 钢板、薄板、长片、线材；不锈钢条棒

V ol 01.04 01.04卷Steel-Structural, Reinforcing, Pressure Vessel, Railway 钢结构、钢筋、压力容器、铁路

V ol 01.05 01.05卷Steel-Bars, Forgings, Bearing, Chain, Tool 钢筋、锻件、轴承、链条、工具

V ol 01.06 01.06卷Coated Steel Products 镀层钢板产品

V ol 02.01 02.01卷Copper and Copper Alloys 铜和铜合金

V ol 02.02 02.02卷Aluminum and Magnesium Alloys 铝和镁合金

V ol 02.04 02.04卷Nonferrous Metals--Nickel, Cobalt, Lead, Tin, Zinc, Cadmium, Precious, Reactive, Refractory Metals and Alloys; Materials for Thermostats, Electrical Heating and Resistance Contacts, and Connectors

有色金属—镍、钴、铅、锌、镉、精致活性难溶金属和合金；温控器、电热和电阻触点材料、连接器

V ol 02.05 02.05卷Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products 金属和无机涂料；金属粉末和金属粉末产品

V ol.03.01 03.01卷Metals - Mechanical Testing; Elevated and Low-Temperature Tests; Metallography

金属—机械测试；高温和低温试验；金相

V ol 04.01 04.01卷Cement; Lime; Gypsum 水泥；石灰；石膏

V ol 04.02 04.02卷Concrete and Aggregates 混凝土和骨料

V ol 04.03 04.03卷Road and Paving Materials 道路及铺路材料

Vol 04.04 04.04卷Roofing and Waterproofing 屋面和防水

V ol 04.05 04.05卷Chemical-Resistant Nonmetallic Materials; Vitrified Clay Pipe; Concrete Pipe; Fiber-Reinforced Cement Products; Mortars and Grouts; Masonry; Precast Concrete

耐化学腐蚀的非金属材料；陶管；混凝土管；纤维增强水泥制品；灰浆和灌浆；砌筑；预制混凝土

V ol 04.06 04.06卷Thermal Insulation; Environmental Acoustics 隔热；环境声学

V ol 04.07 04.07卷Building Seals and Sealants; Fire Standards; Dimension Stone 建筑密封和密封剂；消防标准；块石

V ol 04.08 04.08卷Soil and Rock (I): D 420 - D 5611 土壤和岩石(I): D 420 - D 5611

V ol 04.09 04.09卷Soil and Rock (II): D 5714 - latest 土壤和岩石(II): D 5714—最新

V ol 04.10 04.10卷Wood 木材

V ol 04.11 04.11卷Building Constructions (I): E 72 - E 1670 建筑结构(I): E 72 - E 1670

V ol 04.12 04.12卷Building Constructions (II): E 1671 - latest; Property Management Systems; Technology and Underground Utilities

建筑结构(II): E 1671—最新；资产管理系统；技术和地下公用设施

V ol 04.13 04.13卷Geosynthetics 土工合成

Section 5 of ASTM ASTM第5节“Petroleum Products, Lubricants and fossil fuels”

GENERAL REMARK:

All the section 5 of ASTM will be used as reference only. Process Job Design Specifications and Licensors requirements will prevail in case of conflict (e.g. specifications of products, etc).

“石油产品、润滑剂和化石燃料”

一般说明：

ASTM第5节所有内容仅作为参考。如有冲突（如产品规格等），以工艺工作设计规范和协议要求为准。

V ol 05.01 05.01卷Petroleum Products and Lubricants (I) D56 - D3710 石油产品和润滑剂(I) D56 - D3710

V ol 05.02 05.02卷Petroleum Products and Lubricants (II) 石油产品和润滑剂(II)

V ol 05.03 05.03卷Petroleum Products and Lubricants (III) 石油产品和润滑剂(III)

V ol 05.04 05.04卷Petroleum Products, Lubricants and Fossil Fuels: Petroleum Products and Lubricants (IV)

石油产品、润滑剂和化石燃料：石油产品和润滑剂(IV)

V ol 05.05 05.05卷Petroleum Products, Lubricants, and Fossil Fuels: Combustion Characteristics; Manufactured Carbon and Graphite Products; Catalysts

石油产品、润滑剂和化石燃料：燃烧特性；人造碳和石墨产品；催化剂

V ol 05.06 05.06卷Petroleum Products, Lubricants, and Fossil - Gaseous Fuels; Coal and Coke 石油产品、润滑剂和化石燃料：煤和焦炭

V ol 06.01 06.01卷Paint -- Tests for Chemical, Physical, and Optical Properties; Appearance 油漆—化学、物理和光学性能测试；外观

V ol 06.02 06.02卷Paint -- Products and Applications; Protective Coatings; Pipeline Coatings 油漆—产品及应用；防护涂料；管道涂料

V ol 06.03 06.03卷Paint -- Pigments, Drying Oils, Polymers, Resins, Naval Stores, Cellulosic Esters, and Ink Vehicles

油漆—颜料、干燥油、聚合物、树脂、松脂、纤维素酯、油墨连接料

V ol 06.04 06.04卷Paint -- Solvents; Aromatic Hydrocarbons 油漆—溶剂；芳香烃

V ol 08-01 08-01卷Plastics (I): D256 - D3159 塑料(I): D256 - D3159

V ol 08-02 08-02卷Plastics (II): D3222 - D5083 塑料(II): D3222 - D5083

V ol 08-03 08-03卷Plastics (III): D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products

塑料(III): D5117—最新；纤维增强塑料管道系统和化工设备；塑料建材产品

V ol 08-04 08-04卷Plastic Piping Systems 塑料管道系统

V ol 09.01 09.01卷Rubber, Natural and Synthetic -- General Test Methods; Carbon Black 天然橡胶和合成橡胶—通用试验方法；炭黑

V ol.09.02 09.02卷Rubber Products, Industrial - Specifications and Related Test Methods; Gaskets; Tires

工业橡胶制品—规范和相关测试方法；垫片；轮胎

V ol 11.01 11.01卷Water (I) 水(I)

V ol 11.02 11.02卷Water (II) 水(II)

V ol 15.01 15.01卷Refractories, Activated Carbon; Advanced Ceramics 耐火材料、活性炭；高级陶瓷

V ol 15.06 15.06卷Adhesives 粘合剂

AWS -American Welding Society

AWS-美国焊接学会

A2.4 Standard Symbols for Welding, Brazing, and Nondestructive Examination

焊接、钎焊及无损检测的标准符号

D1.1 Structural welding Code

结构焊接规范

D1.5 Bridge welding Code

桥接焊规范

D1.6 Structural welding Code – Stainless Steel

结构焊接规范—不锈钢

AWW A - American Water Works Association

AWW A-美国自来水厂协会

C-200 Steel Water Pipe - 6 in. (150 mm) and Larger

钢制水管—6英寸（150mm）及更大

C-213 Standard for Fusion-Bonded Epoxy Coating for the Interior and Exterior of

Steel Water Pipelines.

钢制输水管道内部及外部熔接环氧涂层标准

CEMA standards

CEMA标准

ANSI-CEMA 102-2006 Conveyor Terms & Definitions

输送机术语和定义

ANSI-CEMA 402-2003 Belt Conveyors

带式输送机

CFR - Code of Federal Regulation

CFR-联邦法规汇编

1910.119 Process Safety Management of Highly Hazardous Chemicals

高度危险化学物质过程安全管理

EAU - Committee for Waterfront Structures, Harbours and Waterways

EAU-海岸建筑物、港口和航道委员会

EAU 2004 Recommendations of the Committee for Waterfront Structures Harbours and

Waterways, 8th Edition, Issued by the Committee for Waterfront Structures

Harbours and Waterways and the German Society for Soil Mechanics and

Foundation Engineering

海岸建筑物、港口和航道委员会建议，第8版，由海岸建筑物、港口和

航道委员会及德国土壤力学与基础工程学会发行

EEMUA - Engineering Equipment and Material Users Association

EEMUA-英国工程设备和材料用户协会

EEMUA 140 Noise procedure specification

噪音过程说明

EEMUA 141 Guide to the use of EEMUA 140

EEMUA 140使用指南

EEMUA 144 90-10 Copper Nickel Alloy Piping for Offshore Applications : Tubes -

Seamless & Welded

90-10海上应用的铜镍合金管路：管—无缝焊接

EEMUA 145 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification:

Flanges Composite and Solid

90-10海上应用的铜镍合金管路：规范—法兰混合材料和固体

EEMUA 146 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification:

Fittings

90-10海上应用的铜镍合金管路：规范—管件

Publication No. 189 出版号189 Guide to Fieldbus Application for the Process Industry, 1997 加工工业现场总线应用指南，1997

FieldBus Foundation

现场总线基础

AG-140 Wiring and Installation 31.25kbit/s, Voltage Mode, Wire Medium

31.25kbit/s布线和安装，电压模式，电线媒介

AG-163 31.25kbit/s Intrinsically Safe Systems

31.25kbit/s本质安全系统

AG-165 Fieldbus Installation & Planning Guide

现场总线安装及规划指南

FD-043 Foundation Field bus Technical Overview

基金会现场总线技术概述

IAEA - International Atomic Energy Agency

IAEA-国际原子能机构

IAEA Safety Series N°115 (1996 Edition)

IAEA安全系列N°115（1996版）International Basic Safety standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources.

国际电离辐射防护和辐射源安全基本安全标准

IAEA Safety Standard series N°Ts-R-1 (2005 Edition)

IAEA安全系列N° Ts-R-1（2005版）Regulation for the safe Transport of Radioactive Material. 放射性物质安全运输规则

ICRP - International Commission of Radiological Protection ICRP-国际辐射防护委员会

ICRP Publication N°103, 2007 ICRP出版物N°103, 2007 Recommendations of the International Commission on Radiological Protection.

国际辐射防护委员会建议

IEC (International Electro Technical Commission)

IEC（国际电工技术委员会）

IEC 60034 Rotating electrical machines

旋转电机

IEC 60038 Standard voltages

标准电压

IEC 60050 International electrotechnical vocabulary

国际电工词汇

IEC 60051 Direct acting indicating analogue electrical measuring instruments and their

accessories

直接作用模拟指示电测量仪表及其附件

IEC 60060 Guide on high-voltage testing techniques

高压试验技术指南