国际会议论文格式样张Guideline+for+ICCREM+2014

Guideline for ICCREM 2014 Papers

Givenname FAMILYNAME1 and Givenname FAMILYNAME2

1Ph.D. Candidate, Department of Construction and Real Estate, Harbin Institute of Technology, Harbin, China, 150001, PH (86) 451-87654321, FAX (86) 451-87654321, Email: name@https://www.360docs.net/doc/d27422202.html,

2Professor, Department of Construction and Real Estate, Harbin Institute of Technology, Harbin, China, 150001, PH (86) 451-87654321, FAX (86) 451-87654321, Email: name@https://www.360docs.net/doc/d27422202.html,

ABSTRACT

These instructions are formatted to resemble a final paper. Your abstract should be about 150 words long; it must never exceed the first page or contain artwork or references. The abstract should present a concise statement of the scope, principal findings, and conclusions of the paper.Formatting of technical papers is important especially for those interested in seeing conference proceedings that have a consistent appearance. This paper presents the guidelines for authors wishing to submit a paper for ICCREM 2014. The guidelines presented here have also been adopted while formatting the present paper. Styles have been defined. After you have formatted your paper according to this guideline, your submission should have the same …look? as the paper presented here.

INTRODUCTION

Technical papers submitted for inclusion in conference proceedings should not only present interesting technical material and be well written, they also must be formatted properly. Formatting of technical papers is important to those interested in seeing conference proceedings that have a consistent appearance, which in turn makes it easier for readers to skim through all texts. This paper presents the guidelines for authors wishing to submit a paper for ICCREM 2014.

AUTHOR CONTACT INFORMATION

A sample of author contact information is shown on the first page of these instructions. The following information may be provided for each author on the proceedings (* is required): all authors? full name*; Suffix, e.g. Sr, Jr...; Profession title, e.g. P.E., Ph.D. ...; Job title, e.g. Profession, director ... *; Name of organization/employer*; Address of organization/employer including zip code of USA address and country name and postal code if not USA*; Telephone and fax numbers; Email address*.

FORMATTING REQUIREMENTS

Length.Paper length as determined by your conference technical chair includes all text, graphics, and appendices. Please limit abstract to first page of paper.

Point size and https://www.360docs.net/doc/d27422202.html,e 12 point type for text, captions, and author contact information. For type within figures or tables, the 12 point size is preferred. We recommend selecting a serif text font such as “Times”. Italics, bold, and bold italics may be used; we recommend sticking to one “family” of typefaces. Try to avoid the use of Arial fonts as these can be distorted in the conversion to pdf.

Layout.All text must be single-spaced. Page design should be consistent throughout the paper.

Margin settings (see below) must contain all elements of the paper that will be reproduced (text, figures, tables, captions). Short pages are unsightly and waste space; try to fill the imaginary box on each page. Leave at least 1" (3 cm) top and bottom margins. The first page of the paper should be an additional .5" below the top margin.

Table 1.Margin Settings.

Margins 8.5 x 11 (letter) A4

Top 1" 3.5 cm

Bottom 1" 3.5 cm

Left 1.38" 3.25 cm

Right 1.38" 3.25 cm

Style.The paper must be written in the best possible technical and grammatical English. Titles should be concise and should describe the content of the paper. If you have a long title, please consider a Title: Subtitle format.

(1) Mathematics. All mathematics must be embedded in the text. Equations need to be numbered only if they are referred to more than once.

(2) System of units. For more information about SI units, go to the U.S. Metric Association (USMA), Inc. site (https://www.360docs.net/doc/d27422202.html,/%7Ehillger/) or the National Institute of Standards and Technology (NIST) site (https://www.360docs.net/doc/d27422202.html,/cuu/Units/index.html).

Figures and tables.All graphics (photos, line art, and tables) must fit within the above margin settings. All graphics should be understandable when printed in black and white. Do not use only color as a distinguishing feature. Use symbols or patterns on line and bar graphs to identify lines and columns. Landscape orientation is acceptable. Use 12 point type “Times” for text and captions in figures and tables.

Illustrations should be numbered consecutively as they are presented (Figure 1, Figure 2, etc., and Table 1, Table 2, etc.). Each figure should be mentioned or called out before it appears. More than one figure may appear on a page.

Captions and legends. A descriptive caption, including figure number, should be placed directly below the illustration (see Figure 1). A descriptive legend, including table number, should be placed immediately above the table (see Table 1).

Figure 1.Sample line art illustration.

References.All references should appear together at the end of the paper (see below). List all authors in the order given in the source document, then sort references in alphabetical order by authors. References are listed alphabetically by last name of the first author. When two or more references by the same author are listed, year of publication is taken into account, and the earliest work is listed first. Wherever reference is made in the text to an author?s work, the author?s name and year of publication should appear in parentheses. We strongly recommend that superscripts not be used to denote references, as these numbers often appear too small to be read easily. All listed references must be cited in text. See samples below.

Example references are provided in the References section of this paper and they are cited in the next text. The proceedings of the first three IGLC conferences were compiled into a book, edited by Burka (1993). Valuable knowledge can also be found in other books (ICBO1997), doctoral dissertations (Kurtz 1991), technical reports (Fisher and Struik 1974), proceedings (Mossberg 1993; Pennoni 1992), and, of course, journal papers (Tommelein et al. 1999).

COPYRIGHT TRANSFER

No paper can be included in an ASCE publication unless the author has agreed to the terms in the ASCE Authorship, Originality, and Copyright Transfer Agreement. A faxed signed CTA is OK. For more information see https://www.360docs.net/doc/d27422202.html,/Content.aspx?id=29630.

PERMISSIONS

If a figure, photograph, or table has been published previously, the author must obtain written approval from the original publisher.Photos, figures, or other graphic elements and especially material taken from the internet is often copyrighted and cannot be reproduced without permission. For more information on Permissions see https://www.360docs.net/doc/d27422202.html,/Content.aspx?id=29631.

CONCLUSION

It is the author?s responsibility to obtain necessary approv als from the author?s employer prior to submission of paper s. Once a paper has been uploaded, reviewed by author, and officially submitted, it is not possible to edit the document.

With thanks for your efforts, we look forward to providing a record of this conference that will be useful to you and your colleagues for many years to come. ACKNOWLEDGMENTS

Kindly thank Prof. Yong BAI providing a formatting template. We are also glad to have completed this set of formatting instructions and hope they are clear. If not, please let us know. We would like to thank in advance all authors who follow these guidelines diligently.

REFERENCES

Burka, L.P. (1993). “A hypertext history of multi-user dimensions.”

(Dec. 5, 1994). Fisher, J.W., and Struik, J.H.A. (1974) Guide to design criteria for bolted and riveted joints, Wiley, New York.

International Conference of Building Officials (ICBO). (1997). Uniform building code, Whittier, Calif.

Kurtz, M. (1991). “Section 7: Transformation of space in computer graphics.”

Handbook of applied mathematics for engineers and scientists, McGraw-Hill, New York, 7.1-7.42.

Mossberg, W.S. (1993). “Word isn’t perfect but new WordPerfect is too much for words.” Wall Street J., Dec. 2, B1

Pen noni, C.R. (1992). “Visioning: The future of civil engineering.” J. Profl. Issues in Engrg. Educ. AndPract., ASCE, 118(3), 221-233.

Tommelein, I.D., Riley, D. and Howell, G.A. (1999). “Parade game: impact of work flow variability on trade performance.” Journal of Construction Engineering and Management, 125(5), 304-310.

ICCREM 2014论文编排格式说明

一、页面设置：（注：一定使用MS Office Word 2003 or 2007版本！）

1、页边距：上3.5cm，下3.5，左3.25cm，右3.25cm。装订线：0厘米；装订线位

置：左。方向：纵向。

2、纸张大小：A4。宽度：21厘米；高度：29.7厘米。

3、页眉页脚：距边界：页眉：1.5厘米；页脚：1.75厘米。

4、文档网格：网格：只指定行网格。行：每页41；跨度：15.6磅。

（注：页面中不使用页码！）

二、主标题：

1、标题前空三行。

2、主标题样式：字体-Times；字号-12号（小四）；字形-加粗；位置-居中。主标题

句首字母及实词首字母大写。（注：a标题应在最少行内显示；b连词符后面的词

大写（带前缀的除外）；c破折号改为冒号；d冒号后面的词首字母大写！）

3、字数要求：标题应不超过25个单词，允许使用副标题。标题不能有斜体或分段。

避免中文字符！

4、标题后空一行。

三、作者及作者信息：（注：国外作者姓名内容、顺序和大小写等均不能轻

易改动！国内作者姓名按照先名后姓的原则！）

1、作者姓名样式。

2、国内作者：名在前，姓在后；名的首字母大写，不加连词符，姓的全部字母都大

写；作者后用数字上角标顺次标注；用“，”连接作者，用“and”连接最后一个

作者。

3、作者姓名后空一行。

4、作者信息：数字用上角标，其余顶格小四。可以包含内容：学术头衔、称呼、社

会职务或学历*，所属单位名称*，通信地址（邮编）*，电话，传真，email*。*

为必须提供的信息，如缺少需要联系作者！所有信息均用“，”连接。

5、作者信息后空一行。

四、摘要（注：无关键字）：

1、摘要标题格式同一级标题，全大写。

2、标题后空一行。

3、摘要内容格式同正文一致。

4、摘要内容：150词左右，不能含图表和参考文献，不能超过第一页。

五、正文：

1、标题：标题应严格遵循以下格式。（注：不使用标题的自动编号，标题不能孤页！）

一级标题：不使用序号，格式（一级标题全部大写）；与下级标题或内容之间空1

行。

二级标题：不使用序号，格式（二级标题句首字母大写，以“.”结束）；与内容之间空2格，连排。二级标题前空一行。

三级标题：序号：(1)，(2)，(3)，…，(n)；序号与标题内容之间空1格；内容连排。格式：与正文相同。

注：如有四级标题，使用(i)，(ii)，(iii)，(iv)，(v)，…。

2、正文内容段落：格式；允许使用加粗和斜体。

3、图：（注：如使用Visio图形粘贴后，要选择转换！）

（1）使用图形时，一定要在文中有所引出（如see Figure 1）。

（2）图形应居中；图形与上段文字间隔1行。

（3）图内文字格式请尽量使用：线条：0.5磅；字体：Times；字号：12（小四）。

（4）图一定要有图题，且在图形下方。图题仅句首字母大写，图形的位置应放在引出之后。

（5）图题与下段文字内容间隔1行。

（6）所有图必须符合上述页面边缘的设置要求，所有图不能以颜色作为内容区别，在黑白打印时要能够被理解。条形图或饼状图要有图例说明或标

注；横向纸张的图、表也可。

4、表：（注：表格内容对齐原则：表头中部居中；文本一般靠上左对齐、数据一般

按小数点对齐，但都要使其位置居中。）

（1）使用表格时，一定要在文中有所引出（如see Table 1）。

（2）表格一定要有表题，且在表格上方。表题所有实词字母大写，表格的位置应放在引出之后。

（3）表头文字格式；表内文字格式。

（4）表格用“三线表”形式表达，线的宽度，从上到下分别是：1磅，0.5磅，1磅。

（5）表格与下段内容间隔1行。

（6）如果表格在单页无法完全显示，要分页做续表处理，Table 1.(Continued).

（7）如同列单位一致则在列标题以（单位）形式标注；表内所有单位一致，则在表题后以（单位）形式标注。

5、公式：

（1）所有公式必须嵌入正文；如果在文中有引用公式超过一次的，需要对公式进行编号，格式为：(1) (2) (3)……序号靠右端对齐。(Ctrl+Tab, 制表符

对齐)

（2）公式尽量用Microsoft Word的公式编辑器编辑，行间距13.9pt，Times，字号12，。

（3）公式单独成段落应居中，格式。

（4）若公式在文中没有引出，且单独作为一段时，公式应居中排列。

6、页面空白处理：（注：使整个页面尽量饱满，不留空白！）

（1）行距变化，改变空行或部分段落的行距，罗马字体小四单倍行距约为

13.9pt。排版时调整行距可在上下0.5磅之内。

（2）图或表的上下空白处理：剪切段落，注意图表一定要在引出之后；可使

用Shift+Enter切分段落。

7、资助信息：如有资助来源，应在论文后面的ACKNOWLEDGMENTS中列出。

六、参考文献：

1、参考文献标题格式：同一级标题；

2、所有列出的文献一定要在文中引出。引出样式：The proceedings were edited by

Burka (1993); Valuable knowledge (ICBO 1997),doctoral dissertations (Kurtz 1991),

technical reports (Fisher and Struik 1974), proceedings (Mossberg 1993; Pennoni

1992), and journal papers (Tommelein et al. 1999).

3、所有参考文献应按照第一作者的姓氏（last name）的字母升序排列(全选-段落

-AZ-域1-拼音-升序)；如果同一作者的多篇文献被列出时，要按照出版年的先后

进行排列（较早的文献列在前面）。

4、如果相同作者，在相同年度发表多篇论文，引出时需要标注，如(Kurtz 1991a)和

(Kurtz 1991b)

5、同一篇文献被多次参考，在文中就要多次引出作者及出版年。

6、参考文献的书写格式严格按照以下：

期刊论文：

Tommelein, I.D., Riley, D. and Howell, G.A. (1999). “Parade game: impact of work flow variability on trade perfor mance.” Journal of Construction Engineering and Management, 125(5), 304-310.

书/报告：

Fisher, J.W., and Struik, J.H.A. (1974). Guide to design criteria for bolted and riveted joints, Wiley, New York.

International Conference of Building Officials (ICBO). (1997). Uniform building code, Whittier, Calif.

书（节选）：

Kurtz, M. (1991). “Section 7: Transformation of space in computer graphics.” Handbook of applied mathematics for engineers and scientists, McGraw-Hill, New York, 7.1-7.42.

会议/学位论文：

Webb, R.M. and Haupt, T.C. (2000). “The potential of 4D CAD as a tool for construction management.”Proceedings from the 4D CAD and Visualization in Construction Workshops, New York, U.S., 23-30.

Liu, J.Y. (2012). The Research on the Performance Evaluation of the Listed Companies of Real Estate Based on Factor Analysis. Xian University of Architecture and Technology, Shanxi, China, 48-89.

报纸：

Mossberg, W.S. (1993). “Word isn?t perfect but new WordPerfect is too much for words.” Wall Street J., Dec. 2, B1

网页：

Burka, L.P. (1993). “A hypertext history of multi-user dimensions in computer graphics.”

(Dec. 5, 1994).

附：职称列表

本科生Undergraduate

学士Bachelor

硕士研究生Postgraduate

硕士Master

博士研究生Ph.D. Candidate

博士Ph.D.

博士后Postdoctoral

助教Tutor

讲师Lecturer

助理教授Assistant Professor

副教授Associate Professor

教授Professor

研究员Research Fellow

高级工程师Senior Engineer