焊接工艺规程(WPS)PQR

Prepared by 编制: Date: Approved by 批准: Date:

Prepared by 编制: Date: Approved by 批准: Date:

WPS No./Rev.: WPS-11003/Rev.0

Prepared by 编制: Date: Approved by 批准: Date:

WPS No./Rev.: WPS-11004/Rev.0

Prepared by 编制: Date: Approved by 批准: Date:

WPS No./Rev.: WPS-11005/Rev.0

Prepared by 编制: Date: Approved by 批准: Date:

WPS No./Rev.: WPS-11006/Rev.0

Prepared by 编制: Date: Approved by 批准: Date:

WPS No./Rev.: WPS-11007/Rev.0

Prepared by 编制: Date: Approved by 批准: Date:

WPS No./Rev.: WPS-11008/Rev.0

Prepared by 编制: Date: Approved by 批准: Date:

Prepared by 编制: Date: Approved by 批准: Date:

(QW-402) Groove design of Test Coupon

PQR No. PQR-11001/Rev.0

Tensile Test 拉伸试验(QW-150)

Fillet-Weld Test 角焊缝试验 (QW-180)

Result-Satisfactory (Yes or No ) 结论是否合格: Yes NA No NA Penetration into Parent Metal (Yes or No ) 母材是否熔透: Yes NA No NA Macro-Results 宏观检查结果: NA

Other Tests 其它试验

Type of Test 试验类型: NONE Deposit Analysis 焊缝成分: NONE Other 其它: NONE

Welder ’s Name 焊工姓名: lv Wenfei 吕文飞 Clock No. Stamp No. 钢印号: B213 Laboratory Test No. 试验室编号: PMZ-QC-PCTR-110801

Tests conducted by 试验执行人: 郑丽华 Zheng Lihua Test Equipment No.试验设备编号：

PMZ2-0004

We certify that the statements in this record are correct and that the test welds were prepared, welded ,and tested in accordance with the

requirements of Section IX of the ASME Code. 兹证明本报告所述均属正确,并且试件是根据ASME 规范第IX 卷的要求进行试件的制备、焊接和试验的。

Manufacturer 制造厂: 江苏海光重工