AM114-609中文资料
Single Band T/R Antenna
Switch Module 800–1000 MHz
Features
■LTCC T echnology Integrating LPF/Coupler ■GaAs PHEMT Switch Technology ■SMD Package, 5.2 x 4 x 1.7 mm ■Single Control with Low Current Consumption
Applications
■T ransmit/Receive Antenna Switch for Wireless System with Integrated LPF and Coupler for Power Detection
AM114-609
Description
The AM114-609 is a high power antenna switch with an L TCC low pass filter and L TCC coupler included for power detection.The switches are PHEMT GaAs FETs that can operate at 2.5 V with low DC current drain.
Preliminary
5.40 MOLD CAP TOP VIEW
BOTTOM VIEW
SIDE VIEW
Dimensions in mm. Tolerance ± 0.2 unless otherwise specified.
Outline Drawing
Parameter
Min.Typ.
Max.Unit Frequency Range 851
941MHz Insertion Loss 0.60.8
dB
VSWR In-Band 1.5:1
RF Input Power 0
dBm R X Current @ V S = 3 V 30
μA Supply Voltage (V S )
2.7
3.0
5.0
V
Electrical Specifications @ 25°C
Receive Path
Transmit Path
Parameter Min.Typ.Max.Unit Frequency Range806928MHz Insertion Loss0.8 1.0dB Isolation T X- R X in T X Mode (V CTL= 0 V)25dB Inter-modulation 3rd/5th Order-60dBc Inter-modulation 3rd/5th Order – Under VSWR-55dBc Input VSWR In-Band 1.5:1
Harmonic Rejection 2*F O15dB 3*F O20dB Directivity15dB Coupling Factor192021dB T X Current150μA Supply Voltage (V S) 2.7 3.0 5.0V RF Input Power 3.0dBm
Absolute Maximum Ratings
Characteristic Value
Operating Temperature Range (T OP)-30 to +85°C
Storage Temperature Range (T STG)-40 to +85°C
Input Power (P IN)38 dBm
Control Voltage Logic 0-0.1 to 0.2 V
Supply Voltage (V S)5V
Nominal I/O Impedance50 ?
(T X, R X, Ant)
Frequency (GHz)
T X Insertion Loss vs. Frequency
I n s e r t i o n L o s s (d B )
-50
-45-40-35-30-25-20-15-10-500
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
T X Insertion Loss vs. Frequency
I n s e r t i o n L o s s (d B )
0.80
0.85
0.90
0.95
1.00
-1.0
-0.9-0.8-0.7-0.6-0.5-0.4-0.3-0.2-0.10Frequency (GHz)T X VSWR vs. Frequency
V S W R
1.01.11.21.31.41.51.61.71.8
1.9
2.00.80
0.85
0.90
0.95
1.00
Frequency (GHz)R X Insertion Loss vs. Frequency
I n s e r t i o n L o s s (d B )
0.80
0.85
0.90
0.95
1.00
-1.0-0.9-0.8-0.7-0.6-0.5-0.4-0.3
-0.2-0.10Frequency (GHz)
Coupling vs. Frequency
C o u p l i n g (d B )
0.800.85
0.900.95 1.00
-25-24-23-22-21
-20-19-18-17-16-15-14
-13-12-11-10
Typical Performance Data
Frequency (GHz)
T X to R X Isolation vs. Frequency
I s o l a t i o n (d B )
-50
-45-40-35-30-25-20-15-10
-500
0.5
1.0
1.5
2.0
2.5
3.0
Blocking capacitors (47 pF) and inductor (82 nH) to be supplied externally.
Pin Out (Top View)
GND
GND GND S
V CTL R X
Suggested Land Pattern
0.58
0.28
Block Diagram
V CTL
R X
T X
COUPLER
Pin Description
Pin Description
1GND 7GND 2V CTL 8GND 3GND 9GND 4R X 10Coupler 5
GND 11GND 6
Ant
12
T X
Pin Out Table
Dimensions are in mm.
PCB # SK40086, Material:FR4, Dielectric constant:4.1.
The circuit board used in the final application should employ RF circuit design techniques.RF signal lines should have 50 ?impedance.The package bottom ground plane should be connected directly to PCB ground plane.A sufficient
number of via holes should be used to connect the top and bottom ground planes of the PCB.The evaluation circuit board shown is available upon request.
Evaluation PCB
Mode V CTL T X 0R X
Open Circuit
Truth Table
V S = 2.7 to 5 V supplied externally to T X port.