机电一体化中英文对照外文翻译文献

中英文对照外文翻译文献

(文档含英文原文和中文翻译)

By integration of machinery development

The modern science and technology unceasing development, impelled different discipline intersecting enormously with the seepage, has caused the project domain technological revolution and the transformation, in mechanical engineering domain, because the microelectronic technology and the computer technology rapid development and forms to the mechanical industry seepage the integration of machinery, caused the mechanical industry the technical structure, the product organization, the function and the constitution, the production method and the management system has had the huge change, caused the industrial production to enter into “the integration of machinery” by “the machinery electrification” for the characteristic development phase.

First, the integration of machinery outline

Integration of machinery is refers in the organization new owner function, the power function, in the information processing functio n and the control function introduces the electronic technology, u nifies the system the mechanism and the computerization design and the software which constitutes always to call.

Integration of machinery is refers in the organization new owner function, the power function, in the information processing functio n and the control function introduces the electronic technology, u nifies the system the mechanism and the computerization design and the software which constitutes always to call.

The integration of machinery development also has become one to h ave until now own system new discipline, not only develops along with the science and technology, but also entrusts with the new content, but its basic characteristic may summarize is: The inte gration of machinery is embarks from the system viewpoint, synthes is community technologies and so on utilization mechanical technolo gy, microelectronic technology, automatic control technology, compute r technology, information technology, sensing observation and contro l technology, electric power electronic technology, connection techn ology, information conversion technology as well as software progra mming technology, according to the system function goal and the o ptimized organization goal, reasonable disposition and the layout v arious functions unit, in multi-purpose, high grade, redundant reli able, in the low energy consumption significance realize the speci fic function value, and causes the overall system optimization the systems engineering technology, from this produces function system , then becomes an integration of machinery systematic or the inte gration of machinery product.

Therefore, “the integration of machinery”covering “the technolog y”and “the product”two aspects, only are, the integration of machinery technology is based on the above community technology organic fusion one kind of comprehensive technology, but is not m echanical technical, the microelectronic technology as well as othe r new technical simple combination, pieces together, this is the integration of machinery and the machinery adds the machinery elec trification which the electricity forms in the concept basic diffe rence, the mechanical engineering technology has the merely technic al to develop the machinery electrification, still was the traditi onal machinery, its main function still was replaces with the enl argement physical strength, after but developed the integration of machinery, micro electron installment eliminated may substitute fo r certain mechanical parts original Outside function, but also can entrust with many new functions, like the automatic detection, t he automatic reduction information, demonstrate the record, the aut omatic control and the control automatic diagnosis and the protect ion automatically and so on, not only namely the integration of machinery product is human's hand and body extending, human's sens e organ and the brains look, has the intellectualized characterist

ic is the integration of machinery and the machinery electrificati on distinguishes in the function essence.

Second, the integration of machinery development condition

Integration of machinery development may divide into 3 stages roug hly, 20th century 60's before for the first stage, this stage is called the initial stage, in this time, the people determination not on own initiative uses the electronic technology the prelimi nary achievement to consummate the mechanical product the performan ce, specially in Second World War period, the war has stimulated the mechanical product and the electronic technology union, these mechanical and electrical union military technology, postwar trans fers civilly, to the postwar economical restoration positive functi on, has developed and the development at that time generally spea king also is at the spontaneous condition, because at that time the electronic technology development not yet achieved certainly Le vel. Mechanical technical and electronic technology union also not impossible widespread and thorough development, already developed the product was also unable to promote massively.

The 20th century 70~80 ages for the second stage, may be called the vigorous development stage, this time, the computer technology, the control technology, the communication development, has laid the technology base for the integration of machinery development, large-scale, ultra large scale integrated circuit and microcomputer swift and violent development, has provided the full material base for the integration of machinery development, this time characteristic is:

①A mechatronics word first generally is accepted in Japan, probably obtains the quite widespread acknowledgment to 1980s last stages in the worldwide scale;②The integration of machinery technology and the product obtained the enormous development;③The various countries start to the integration of machinery technology and the product give the very big attention and the support. 1990s later periods, started the integration of machinery technolog

y the new stage which makes great strides forward to the intelle ctualized direction, the integration of machinery enters the thorou gh development time, on the one hand, optics, the communication a nd so on entered the integration of machinery, processes the tech nology also zhan to appear tiny in the integration of machinery the foot, appeared the light integration of machinery and the mic

ro integration of machinery and so on the new branch; On the ot her hand to the integration of machinery system modelling design, the analysis and the integrated method, the integration of machi nery discipline system and the trend of development has all condu cted the thorough research, simultaneously, because domains and so

on artificial intelligence technology, neural network technology a nd optical fiber technology obtain the huge progress, opened the development vast world for the integration of machinery technology,

these research, will urge the integration of machinery further t o establish the integrity the foundation and forms the integrity gradually the scientific system.

Third, the integration of machinery trend of development

Integration of machinery is the collection machinery, the electron, optics, the control, the computer, the information and so on th e multi-disciplinary overlapping syntheses, its development and the progress rely on and promote the correlation technology developme nt and the progress, therefore, the integration of machinery main development direction is as follows:

3.1Intellectualized

Intellectualization is a 21st century integration of machinery tech nological development important development direction, the artificial intelligence obtains day by day in the integration of machinery constructor's research takes, the robot and the numerical control engine bed intellectualization is the important application, here said “the intellectualization”is to the machine behavior descr iption, is in the control theory foundation, the absorption artifi cial intelligence, the operations research, the computer science, t he fuzzy mathematics, the psychology, the physiology and the chaos dynamics and so on the new thought, the new method, simulate t he human intelligence, enable it to have abilities and so on j udgment inference, logical thinking, independent decision-making, obt ains the higher control goal in order to, indeed, enable the int egration of machinery product to have With the human identical in telligence, is not impossible, also is nonessential, but, the high performance, the high speed microprocessor enable the integration of machinery product to have .preliminary intelligent or human's partial intelligences, then is completely possible and essential.

3.2 Modular

Modulations are one item important and the arduous project, becaus e the integration of machinery product type and the manufacturer are many, but the development and the development have standard m echanical connection, electrical connection, power connection, the e nvironment connection integration of machinery product unit are an item extremely complex also are the extremely important matters, like the development collection deceleration, the intelligent velo city modulation, the electrical machinery in a body power unit, h ave function and so on vision, imagery processing, recognition and range finder control units, as well as each kind can complete the model operation the mechanism, like this, may use the standar d unit to develop the new product rapidly, simultaneously also ma y expand the scale of production, this need formulation Each stan

dard, in order to various parts, the unit match and the connecti on, as a result of the conflicts of interest, very will be diff icult to formulate international or the domestic this aspect stand ard in the near future, but might through set up some big enter prises to

8 form gradually, obviously, the advantage which from the el ectrical product standardization, the seriation will bring may af firm, regardless of will be to produces the standard integration of machinery unit the enterprise to produce the integration of ma chinery product the enterprise, the formalization will give the in tegration of machinery enterprise to bring the happy future

3.3 Network

1990s, the computer technology and so on the prominent achievement was the networking, networking starting with the rapid developmen t for the science and technology, the industrial production, polit ical, the military, the education magnanimous act person daily l ife has all brought the huge transformation, each kind of network the global economy, the production linked up into a single stre tch, enterprise's competition will also globalize, once the integra tion of machinery new product developed, so long as its function were original, the quality was reliable, very quick could the b est-selling whole world, as a result of the network popularization , was on the rise based on network each kind of long-distance c ontrol and the surveillance technology, but long-distance control t erminal device itself will be the integration of machinery product , the field busWas the domestic electric appliances network has

9 become the situation with the local area network technolog y, connected using the family network each kind of domestic elect ric appliances take the computer as the central computer integrati on electrical appliances system, caused the people at home to sha re the inconvenience and the joy which each kind of high-tech br ought, therefore, the integration of machinery product faced the n etwork direction to develop without doubt.

3.4 Microminiaturized

Microminiaturization emerge in the end of 1980s, refers is the in tegration of machinery to the miniature machine and the microscopi c domain development tendency, overseas name it micro electron mec hanical system (MEMS), makes a general reference the geometry size not to surpass 1cm3 the integration of machinery product, and t o micron, the nanometer level development, the micro integration o f machinery product volume small, consumes energy few, the movemen t is nimble, in aspects and so on biological medical service, mi litary, information has the incomparable superiority, the micro int egration of machinery development bottleneck lies in the micro mec

hanical technology, the micro integration of machinery product proc essing uses the fine processing technology, namely ultra precise t echnology, it including photoetching technology and etching technolo gy two kinds.

3.5 Green

Industries lived developed for the people have brought the huge c hange, on the one hand, the material was rich, the life was com fortable; On the other hand, the resources reduce, the ecological environment receives the serious pollution, therefore, the people appealed the protection environment resources, the return nature, the green product concept arises at the historic moment under t his kind of call, the green is the time tendency, the green pro duct in its design, the manufacture, the use and in the destruct ion life process, conforms to the specific environmental protection and the human health request, harmless or the harm are extremel y few to the ecological environment, the resources use factor is extremely high, the design green integration of machinery product , has the broad development future, the integration of machinery product green mainly is refers, when use does not pollute the ec ological environment, after the abandonment can recycle the use. 3.6 systematizations

One of systematized performance characteristics is the system archi tecture further uses open style and the patternizing main line st ructure. the system may the nimble configuration, carries on tailo rs and the combination willfully, simultaneously seeks realizes the multi-subsystem coordination control and the synthesis management, second performance is the correspondence function big enhancement, generally besides RS232, but also will have RS485, the DCS pers onification, the future integration of machinery even more pays gr eat attention to the product and human's relations, the integratio n of machinery personification will have two meanings, one will b e, the integration of machinery product finally user will be a h uman, how will entrust with the integration of machinery product person's intelligence, the emotion, the human nature appears more and more importantly, specially the opposite partyWith the robot, its high-level boundary is the man-machine integration, another imi tates the biological mechanism, develops each kind of mechanical a nd electrical body flower product, in fact, many integration of m achinery products all are developed animal's inspiration.

Fourth, the model integration of machinery product

Integration of machinery product subsystem (complete machine) and t he foundation Yuan, the part two big kinds, the typical integrati on of machinery system includes: The numerical control engine bed, the robot, the automobile computerization product,

12 the intellectualized instrument measuring appliance, the elec tronic publishing printing system, the CAD/CAM system and so on, the typical integration of machinery Yuan, the part includes: Elec tric power electronic device and equipment, programmable controller, fuzzy controller, miniature electrical machinery, sensor, special-p urpose integrated circuit, servo and so on, these model integratio n of machinery product technical present situation, trend of devel opment, market prospect analysis omitting.

Fifth, our country develops the situation and the duty integration of machinery work which a€?

The integration of machinery” faces mainly includes two levels: One, with the microelectronic technology transformation tradition industry, its goal is the energy conservation, the nodal wood, enhances the work efficiency, improves the product quality, enhances the traditional industry technology advancement one step; Two, development automation, digitization, intellectualized mechanical and electrical products, promotion product renewal.

(1) our country a€?the integration of machinerya€ the work fac es situation

1. Our country is big with the microelectronic technology transfor mation tradition industry work load and is broad, has difficulty

2. Our country with the integration of machinery technology accele ration product renewal, enhances the market share the call to be high, has the pressure.

3.Our country is low with the integration of machinery product su bstitution technology content and the added value, consumes energy, the water consumption, consumes the material to be high, the po llution, harasses the people product the responsibility to be heav y, has the significance, in our country industrial system, the en ergy consumption, the water consumption wealthy and powerful family , also accounts for the quite great proportion to the environment al pollution serious enterprise, in recent years our country's ind ustry structure, product mix although several passes through the adjustment, but because many kinds of reasons, the result contin uously insufficiently is obvious, inside this no doubt has the hi gher authority to lead the department the policy comes out of ma ny doors question, “therefore has the enterprise “to hate to le ave one's native land”clings to tenaciously industry”the quest ion, but undeniable also has cannot optimize the ideal industry, optimal pleasing product The question, on the good answer already suspended at these enterprise's front, this was the development integration of machinery, developed with the production related int egration of

14 machinery product, the integration of machinery product fu nction strong, the performance good, the quality high, the cost w

as low, also had the flexibility, might according to when the ma rket requirement and the user reflection the product mix and the production process made the essential adjustment, the reform, but did not need to change the equipment, this was the solution me chanical and electrical products multi-varieties, the few volume pr oduction important outlet, simultaneously, might pour into the fres h blood for the traditional mechanical industry, brought the new vigor, extricated the machinery production from the arduous physica l labor, realization Enlightened production.

Moreover, looked from the market demand angle, because our country develops, the development integration of machinery product history is not long, the disparity is big, many product varieties, quan tity, the scale, the quality all cannot meet the need, the impor t volume all quite is big every year, therefore must develop urg ently.

(2) Our country a€?the integration of machinerya€ work duty Our country may summarize in the integration of machinery aspect duty is two speeches: A speech widely thoroughly uses the integra tion of machinery technological transformations tradition industry; Another speech is develops the integration of

15 machinery product on a grand scale, the promotion mechani cal and electrical products renewal, the total goal is the promot ion mechanical and electrical body industry formation, makes the c ontribution for our country industrial structure and the product m ix adjustment.

In brief, the integration of machinery technology not only is pro motes the traditional mechanical and electrical industry fresh bloo d and the source power, also is opens our country mechanical and electrical profession product mix, the industrial structure adjust s the front door the key.

Sixth, our country develops a€?the integration of machinerya€ c ountermeasure

(1) Enhancement overall plan arrangement, coordinated development pl an

At present, our country is engaged in the unit which “the integ ration of machinery”the research develops and produces to be ve ry many, each one all has a set of own development strategy, va rious units' plan as a result of respective standpoint, the objec tive point limit, only is considered unavoidably the local interes t, various

16 department responsible for the work's related plan and pl an, also some unification consideration insufficiency, the overall plan arrangement insufficient question, simultaneously lacks the com prehensive survey overall situation to have the authority developme

nt plan and the strategic plan, therefore, suggested various depar tment responsible for the work charges the unit concerned in to conduct the thorough investigation and study, in the scientific an alysis foundation, formulates manages the overall situation “the i ntegration of machinery”the research, the development, the produc tive plan and the plan Avoids developing duplicates, produces has

a collision!

(2) Strengthened profession management, display a€?associationa€function

At present, our country “integration of machinery”hot, but acco rding to the present profession division method and the management system, “the policy comes out of many doors”is difficult duo , therefore, our country has the necessity to be clear about one “the integration of machinery”the profession to manage the or ganization, according to the present country political reform and the economic restructuring spirit, as well as the integration of machinery profession characteristic, we suggested, strengthens Beijin g Integration of machinery Association as soon as possible the co nstruction, entrusts with its profession management function, “the association”must further expand the leadership organization - -council representative the stratification plane and the coverage, must strengthen the office, secretariat's construction; Must throu gh its astute capable administrative body, the economic entity, th

e organization

17 “the profession”the development plan, strategic plan dr awing up; The instruction profession stationing layout adjustment, carries on develops the breach choice, pays special attention to the priority project the experiment site and the related project loses one's temper, the tender work ......

Seventh, the conclusion

In summary, the integration of machinery appearance is not isolate d, it is many science and technology development crystallization, is the social productive forces develops the certain stage inevita bly request Certainly, also has with the integration of machinery related technology very many, and along with the science and te chnology development, the tendency which each kind of technology w ill fuse mutually more and more is obvious, the integration of m achinery technology broad prospects for development more and more will be also bright.

论机电一体化的发展

现代科学技术的不断发展，极大地推动了不同学科的交叉与渗透，导致了工程领域的技术革命与改造,在机械工程领域，由于微电子技术和计算机技术的迅速发展及其向机械工业的渗透所形成的机电一体化，使机械工业的技术结构、产品机构、功能与构成、生产方式及管理体系发生了巨大变化，使工业生产由“机械电气化”迈入了“机电一体化”为特征的发展阶段。

一、机电一体化概要

机电一体化是指在机构得主功能、动力功能、信息处理功能和控制功能上引进电子技术，将机械装置与电子化设计及软件结合起来所构成的系统的总称。

机电一体化发展至今也已成为一门有着自身体系的新型学科，随着科学技术的不但发展，还将被赋予新的内容,但其基本特征可概括为：机电一体化是从系统的观点出发，综合运用机械技术、微电子技术、自动控制技术、计算机技术、信息技术、传感测控技术、电力电子技术、接口技术、信息变换技术以及软件编程技术等群体技术，根据系统功能目标和优化组织目标，合理配置与布局各功能单元，在多功能、高质量、高可靠性、低能耗的意义上实现特定功能价值，并使整个系统最优化的系统工程技术,由此而产生的功能系统，则成为一个机电一体化系统或机电一体化产品

?因此，“机电一体化”涵盖“技术”和“产品”两个方面,只是，机电一体化技术是基于上述群体技术有机融合的一种综合技术，而不是机械技术、微电子技术以及其它新技术的简单组合、拼凑。这是机电一体化与机械加电气所形成的机械电气化在概念上的根本区别,机械工程技术有纯技术发展到机械电气化，仍属传统机械，其主要功能依然是代替和放大的体力,但是发展到机电一体化后，其中的微电子装置除可取代某些机械部件的原有功能外，还能赋予许多新的功能，如自动检测、自动处理信息、自动显示记录、自动调节与控制自动诊断与保护等,即机电一体化产品不仅是人的手与肢体的延伸，还是人的感官与头脑的眼神，具有智能化的特征是机电一体化与机械电气化在功能上的本质区别。

二、机电一体化的发展状况

机电一体化的发展大体可以分为3个阶段,20世纪60年代以前为第一阶段，这一阶段称为初级阶段,在这一时期，人们自觉不自觉地利用电子技术的初步成果来完善机械产品的性能。特别是在第二次世界大战期间，战争刺激了机械产品与电子技术的结合，这些机电结合的军用技术，战后转为民用，对战后经济的恢复起了积极的作用,那时研制和开发从总体上看还处于自发状态,由于当时电子技术的发展尚未达到一定水平，机械技术与电子技术的结合还不可能广泛和深入发展，已经开发的产品也无法大量推广

20世纪70~80年代为第二阶段，可称为蓬勃发展阶段。这一时期，计算机技术、控制技术、通信技术的发展，为机电一体化的发展奠定了技术基础。大规模、超大规模集成电路和微型计算机的迅猛发展，为机电一体化的发展提供了充分的物质基础。这个时期的特点是：①Mechatronics一词首先在日本被普遍接受，大约到20世纪80年代末期在世界范围内得到比较广泛的承认；②机电一体化技术和产品得到了极大发展；③各国均开始对机电一体化技术和产品给以很大的关注和支持

20世纪90年代后期，开始了机电一体化技术向智能化方向迈进的新阶段，机电一体化进入深入发展时期。一方面，光学、通信技术等进入了机电一体化，微细加工技术也在机电一体化中崭露头脚，出现了光机电一体化和微机电一体化等新分支；另一方面对机电一体化系统的建模设计、分析和集成方法，机电一体化的学科体系和发展趋势都进行了深入研究。同时，由于人工智能技术、神经网络技术及光纤技术等领域取得的巨大进步，为机电一体化技术开辟了发展的广阔天地。这些研究，将促使机电一体化进一步建立完整的基础和逐渐形成完整的科学体系