中小企业融资问题与对策外文资料翻译[1]

中小企业融资问题与对策外文资料翻译[1]
中小企业融资问题与对策外文资料翻译[1]

淮阴工学院

毕业设计(论文)外文资料翻译

学院:江淮学院

专业:会计学

姓名:杨欢

学号:3082113331

外文出处:Facts for You

(用外文写)

附件: 1.外文资料翻译译文;2.外文原文。

注:请将该封面与附件装订成册。

附件1:外文资料翻译译文

中小型企业融资决策

企业的产生、生存及发展均离不开投资与融资活动。随着我国加入WTO 组织,市场经济体制的逐步完善,金融市场的快速发展,投资与融资效率也越来越成为企业发展的关键。对于中小型企业而言,应要根据自身发展需求,认真考虑如何选择自己需要和适合自己发展阶段的融资方式以及各种融资方式的利用时机、条件、成本和风险,确定合适的融资规模以及制定最佳融资期限等问题。要解决这些问题,需要中小型企业制定适当的融资策略,以作出最优化的融资决策。

一、企业融资决策概述

(一)企业融资决策概述

企业融资决策,是企业根据其价值创造目标需要,利用一定时机与渠道,采取经济有效的融资工具,为公司筹集所需资金的一种市场行为。它不仅改变了公司的资产负债结构,而且影响了企业内部管理、经营业绩、可持续发展及价值增长。典型的融资决策包括出售何种债务和股权(融资方式)、如何确定所要出售债务和股权的价值(融资成本)、何时出售些债务和股权(融资时机)等等。而其中最主要的包括融资规模的决策和融资方式的决策。融资规模应为企业完成资金使用目的的最低需要量。而企业的融资方式则多种多样,常见的以下几种:

1.财政融资。财政融资方式从融出的角度来讲,可分为:预算内拨款、财政贷款、通过授权机构的国有资产投资、政策性银行贷款、预算外专项建设基金、财政补贴。

2.银行融资。从资金融出角度即银行的资金运用来说,主要是各种代款,例如:信用贷款、抵押贷款、担保贷款、贴现贷款、融资租凭、证券投资。

3.商业融资。其方式也是多种多样,主要包括商品交易过程中各企业间发生的赊购商品、预收货款等形式。

4.政券融资。该方式主要包括股标融资和债券融资两大类。

(二)融资决策过程

企业制定融资决策的过程,也即确定最优资本结构的过程。具体决策程序是:首先,当一家企业为筹措一笔资金面临几种融资方案时,企业可以分别计算出各个融资方案的加权平均资本成本率,然后选择其中加权平均资本成本率最低的一种。其次,被选中的加权平均资本成本率最低的那种融资方案只是诸种方案中最佳的,并不意味着它已经形成了最佳资本结构,这时,企业要观察投资者对贷出款项的要求、股票市场的价格波动等情况,根据财务判断分析资本结构的合理性,同时企业财务人员可利用一些财务分析方法对资本结构通行更详尽的分析。最后,根据分析结果,在企业进一步的融资决策中改进其资本结构。

(三)中小企业融资的总思路

中小企业融资的总体思路应是:投资与融资相结合,以投资带动融资。融资决策在中小企业财务决策中并不具备像大企业(尤其是股份公司)那样的独立性,它应该是企业投资决策的一部分,融资必须直接为投资服务。这也就是说,中小企业的融资决策必须通过投资决策这一环节才能通向财务管理目标,而不是像股份公司那样,融资决策与财务目标之间可以建立直接的函数关系。这是因为:

1.中小企业财务目标是利润最大化,只有投资活动才能为企业带来利润,即最优的投资决策就是最优的筹资决策。

2. 中小企业的资金供需矛盾突出,企业融资的渠道、数量、时间都受到各种客观条件的限制。要像大企业那样灵活地运用多种手段来自由调整资本结构,对中小企业来说是不现实的。

因此,对于有数十年经营历史,由职业经理层管理的中小型企业而言,融资计划是为投资服务的,必须与投资需求相匹配,包括融资金额和融资时间上的匹配。更重要的,投资项目必须是经过多方面因素考虑的,不是盲目圈钱的幌子,否则容易出现投融资决策失效,导致投资失败、损害企业权益的问题。在监督职能缺乏的

中小型企业中,进行程序化的项目可行性论证是必要的,但只是决策的一个部分,提供财务上的参考,不能对整个计划是否可行提供意见,更不能作为项目可行的决定性依据。战略和内部需要等各种因素综合考虑是很重要的。

二、我国中小型企业融资环境分析

企业是在一定环境下的各种经济资源的有机集合体。企业运营只有适应和了解环境变化的要求,才能立于不败之地。企业面临的环境是指存在于企业周围,影响企业生存和发展的各种客观因素和力量的总称,它是企业选择筹资方式的基础。就现阶段而言,我国中小企业的融资环境现状主要有以下几个方面:

(一)从中小企业自身的状况来看

我国中小企业的经营管理水平和技术水平往往比较低,企业内部缺乏有效的监督制约机制,这样造成的一个结果就是资金使用效率不高,风险比较大。因此,银行等金融机构对中小企业经营和发展的信任度很低,所以也不会轻易地将资金借贷给中小企业。

(二)从银行等金融机构的经营原则来考虑

银行等金融机构的经营讲究资金的“效益性、安全性、流动性”,在实践中银行等金融机构给予客户贷款的一个前提条件就是要求客户能够提供有效的担保,中小企业自身则因资力有限而无法提供有效的担保,同时因为中小企业经营的风险性,第三人在一般情况下也不会为中小企业的债务提供担保。既然不能提供足额有效的担保,银行等金融机构就不会给中小企业发放贷款。

(三)从国家的产业政策和经济政策来看

政府对中小企业的扶持不足也是造成中小企业融资难的一个重要原因。我国对中小企业虽然也有一些扶持政策,比如《中华人民共和国乡镇企业法》当中也规定,“国家运用信贷手段,鼓励和扶持乡镇企业的发展”:“县级以上人民政府依照国家有关规定,可以设立乡镇企业发展基金”,“乡镇企业发展基金专门用于扶持乡镇企业发展”等,但是因为缺乏有效的制度保障,这些规定很难落到实处。

(四)从我国的金融管制来看

企业之间不能相互借贷也在一定程度上增加了中小企业融资的难度。依据我国现行法律,公民之间、企业与公民之间、企业或公民与金融机构之间可以发生合法的借贷关系,然而企业与企业之间的借贷却被视为非法借贷关系而为法律所不允许。这样,对于中小企业来说,等于少了一条融资的途径,无形之中也增加了中小企业的融资难度。

三、中小型企业应制定合理融资的具体策略

因此,对于在现阶段我国的中小企业融资环境对中小企业融资不利的情况下而言,中小企业在制定具体的融资策略时,应注意以下几个方面:

(一)资金数量上追求合理性

对以股份公司为代表的大企业来讲,融资的目的在于实现最佳资本结构,即追求资金成本最低和企业价值最大;而对中小企业来讲,融资的目的是直接确保生产经营所需的资金。资金不足会影响生产发展,而资金过剩也会导致资金使用效果降低,形成浪费。由于中小企业融资不易,所以经营者在遇到比较宽松的筹资环境时,往往容易犯“韩信点兵,多多益善”的错误。但如果筹来的资金用得不合理或者并非真正需要,那么好事就变成了坏事,企业反倒可能背负沉重的债务负担,进一步影响融资能力和获利能力。因此,企业界在进行融资决策之初,要根据企业对资金的需要、企业自身的实际条件以及融资决策的难易程度和成本情况下,量力而行,确定企业合理的融资规模。

(二)资金使用上追求效益性

中小企业在融资渠道和方式上不像大企业那样存在较大的选择余地,但这并不是说中小企业只能“饥不择食”,相反,由于中小企业的抗风险能力弱以及筹资困难,更应该对每笔资金善加权衡,综合考虑经营需要与资金成本、融资风险及投资收益等诸多方面的因素,必须把资金的来源和投向结合起来,分析资金成本率与投资收益串的关系,避免决策失误。

(三)资金结构上追求配比性

中小企业的资金运用决定资金筹集的类型和数量。我们知道,企业总资产由流动资产和非流动资产两部分构成。流动资产又分为两种不同性态:一是其数量随生产经营的变动而波动的流动资产,即所谓的暂时性流动资产;二是类似于固定资产那样长期保持稳定水平的流动资产,即所谓的永久性流动资产。按结构上的配比原则,中小企业用于固定资产和永久性流动资产上的资金,以中长期融资方式筹措为宜;由于季节性、周期性和随机因素造成企业经营活动变化所需的资金,则主要以短期融资方式筹措为宜。强调融资和投资在资金结构上的配比关系对中小企业尤为重要。

(四)资金运作上,在追求增量筹资的同时更加注重存量筹资

增量筹资指从数量上增加资金总占用量,以满足生产经营需要;存量筹资是指在不增加资金总占用量的前提下,通过调整资金占用结构、加速资金周转,尽量避免不合理的资金使用,提高单位资金的使用效果,以满足企业不断扩大的生产经营需要。增量筹资与存量筹资的紧密结合,也反映出中小企业的筹资活动与投资活动的内在必然联系,因为存量筹资实际上就是一种资金运用,它属于投资活动的范畴。比如,企业若能将闲置设备适时采用出租、出售转让等形式进行“存量筹资”,则不但可以避免损失和资金的积压,而且有助于提高长期资金的流动性,减轻过于沉重的融资压力。

(五)筹资渠道上,追求以信誉取胜

主动与金融机构保持良好关系,使之了解企业,看到企业远大的前景,愿意支持企业的发展,这对每一个成功的中小企业经营者来说都是必修的一课。具体包括两个方面:一方面是对金融机构的选择,应选择对中小企业立业与成长前途感兴趣并愿意对其投资的金融机构;能给予企业经营指导的金融机构;分支机构多、交易方便的金融机构;资金充足,而且资金费用低的金融机构;员工素质好、职业道德良好的金融机构等。另一方面是中小企业要主动向合作的金融机构沟通企业的经营方针、发展计划、财务状况,说明遇到的困难,以实绩和信誉赢得金融机构的信任和支持,而不应以各种违法或不正当的手段套取资金。

(六)筹资方式上,选择适合企业本身规模、实力与所处阶段

在对融资收益与成本进行比较之后,认为确有必要融资时,就需要考虑选择什么样的融资方式。在选择融资方式时,通常要考虑企业自身规模的大小、实力强弱以及企业所处的发展阶段,同时结合不同融资方式的特点,选择适合本企业发展的融资方式,例如,在中小企业创业初期,其融资方式可以上选择股权融资,因为创业初期,风险很大,很少有金融机构等债权人来为你融资。而在股权融资中,企业主与其朋友和家庭成员的资金占了绝大多数。这部分融资是属于“内部人融资”或“内部融资”,也叫企业“自己投资”。到中小企业发展到一定时期和规模以后,就可以选择债权融资。债权融资主要来自金融机构,包括商业银行和财务公司等。属于高科技行业的中小企业,可以考虑到创业板市场发行股票融资;不符合上市条件的中小企业,则可以考虑银行贷款融资等。

(七)融资方式上,选择最有利于提高企业竞争力的融资方式

中小企业融资通常会给企业带来以下直接影响:首先,通过融资,可以壮大中小企业资本实力,增强中小企业的支付能力和发展后劲;其次,通过融资,可以提高中小企业的信誉,扩大企业产品的市场份额;再次,通过融资,可以扩大中小企业规模,增强企业获利能力,从而充分利用规模经济优势提高企业在市场上的竞争力,加快企业的发展。但是企业竞争力的提高程度因企业融资方式、融资收益的不同而存在很大差异。比如,股票融资、尤其是初次发行普通股并上市流通,不仅会给企业带来巨大的资金融通,还会大大提高企业的知名度和商誉,使企业的竞争力获得提高。因此,在进行融资决策时,中小企业要先选择最有利于提高竞争力的融资方式。

随着中国加入世界贸易组织,中国中小企业的准入领域将会进一步拓展,这为中小企业的发展提供了难得的机会,但同时也向中小企业提出了挑战。而中小企业在发展中作出的融资决策,直接关系着中小企业的存亡,所以,中小企业的投融资决策中应在充分考虑企业自身条件的基础上,考虑企业融资策略可行性的各个方面和可能会带来的各种问题,寻求企业整体收益的均衡。

Small and Medium Enterprises financing decision

Business generation, survival and development are inseparable from the inves tment and financing activities. With China's accession to WTO organization, the market economy system, the gradual improvement of the financial markets, rapid development, investment and financing efficiency is increasingly becoming the key to the development of enterprises. For the small and medium enterprises, accord ing to their own development needs should seriously consider how to select their own needs and suited to their stage of development financing, as well as a variet y of financing the use of timing, conditions, costs and risks, determine the approp riate size of the financing and the development of the best financing periods. To solve these problems, small and medium enterprises need to develop appropriate financing strategies in order to make the most optimal financing decision.

First, an overview of corporate finance decision-making

(A) an overview of corporate finance decision-making

Corporate finance decision-making, is the enterprise value creation objectives in accordance with its needs, the use of a certain timing and channels to take c ost-effective financing tool for companies to raise the funds needed for a market behavior. It not only changed the structure of the company's assets and liabilities, but also affected the internal management, business performance, sustainable deve lopment and value growth. A typical decision-making including the sale of what kind of financing of debt and equity (financing), how to determine which they want to sell the value of debt and equity (financing costs), when to sell more de bt and equity (financing opportunities) and so on. Which include the financing o f the size of the most important decision-making and financing decisions. Financi ng scale enterprises should be the purpose of completing the minimum requiremen ts for the use of funds. The financing of enterprises are diverse, common the fol lowing:

1. Fiscal financing. Financial financing from a financial point of view out, can be divided into: budget allocation, financial loans, through authorized agencie s of the state-owned assets investments, policy-oriented bank loans, special constru ction of extrabudgetary funds, financial subsidies.

2. Bank financing. From the Chinese-funded financial point of view that is out of the use of bank funds, the main sections of various generation, such as: credit, mortgage loans, secured loan, discounted loans, lease financing, securities i nvestment.

3. Commercial financing. Its the way they are varied, mainly including trad

e transaction process that took place between enterprises on credit products, prepai d loans and other forms.

4. G voucher financing. The method includes tendering, financing and bond financing two major categories.

(B) the financing decision-making process

Corporate financing decision-making process to develop, that is to determine the optimal capital structure process. The specific decision-making process is: Fi rst, when a sum of money to finance companies faced several financing options, companies can calculate the various financing options respectively, the weighted a verage cost of capital rate, and then select one of the lowest weighted average co st of capital as a. Secondly, selected the lowest weighted average cost of capital is just the kind of financing options best Zhuzhong program does not mean that it has become the best capital structure, this time, enterprises should observe the investors in the loan payment request, the stock market price fluctuations, etc., a ccording to financial analysis to determine the reasonable capital structure, while c orporate finance officers can use some of the financial analysis of capital structur e, access more detailed analysis. Finally, according to results of the analysis in t he corporate financing decision-making to further improve its capital structure.

(C) the general idea of the Financing of SMEs

SME finance general idea should be: a combination of investment and finan ce in order to finance investment-driven. Financial decision-making in small and medium enterprises do not have the financial decision-making as big business (esp ecially stock company), as the independence, it should be a part of business inves tment decisions, financing must be direct investment services. This means that th e SMEs in the decision-making must pass in order to lead to investment decision-making in this part of the financial management objectives, rather than as stock c ompanies, finance decision-making and financial objectives to establish a direct fu nctional relationship. This is because:

1. SME financial goal is to maximize profits, only the investment activities in order to bring profits for the enterprise, that is the optimal investment decision s is the optimal financing decision-making.

2. The obvious contradiction between supply and demand of funds for SME s, corporate finance channels, quantity, time is influenced by various objective con ditions. To act like large companies the flexibility to use various means to freely adjust the capital structure, for SMEs is unrealistic.

Thus, for decades operating history, layer management by professional mana gers of small and medium enterprises, financing plan for investment services, and must be matched with investment demand, including financing and financing the amount of time matching. More importantly, the investment projects through a v ariety of factors must be considered, not blind means for misappropriating a cover, otherwise easily lead to investment and financing decision-making failures, leadin g to investment failure, damage to corporate rights. In the absence of the oversi ght function of the small and medium enterprises in the conduct of the proceedin gs of a project feasibility study is necessary, but only a part of the decision-maki ng, provide financial information, the feasibility of the whole scheme can not pro

vide advice, but can not serve as a viable project a decisive basis. Strategy and internal needs of a variety of factors to consider is very important. [Paper Net https://www.360docs.net/doc/f113696699.html,]

Second, our analysis of the financing environment for SMEs

Enterprise is in a certain environment, a variety of economic resources, the organic collection. Business operations to adapt and understand the requirements of environmental change, to be invincible. Enterprises are faced with an environ ment is present in the surrounding businesses, affecting business survival and deve lopment of various objective factors and forces of the general, it is the basis for corporate financing choices. At the moment, the status quo of China's financing environment for SMEs mainly in the following areas:

(A) From the situation of SMEs in view of their own

China's SME business management and technical levels are relatively low, a lack of effective internal supervision and control mechanisms, such a result is ca used by inefficient use of funds, the risk is relatively large. Thus, banks and oth er financial institutions and development of SME business confidence is low, so it will not easily borrow funds to SMEs.

(B) from banks and other financial institutions operating principles to consid er

Banks and other financial institutions pay attention to fund the operation of "efficiency, safety, liquidity", in practice, banks and other financial institutions to give customers a prerequisite for the loan is to ask customers to provide effective guarantees for SMEs with limited self-financing due to unable to provide effectiv e security, while for SMEs operating risks, the third person in normal circumstanc es would not provide guarantees for the debt of small and medium enterprises.

Since it is impossible to provide full and effective guarantees, banks and other fin ancial institutions will not give loans to small and medium enterprises.

(C) from the country's industrial policies and economic policies are concerne d

Lack of government support for SMEs, SME financing difficulties also contr ibuted to an important reason. China for SMEs, although there are a number of supportive policies, such as "The People's Republic of China Township Enterprise Law," which also stipulates that "the state to use the credit means, to encourage and support the development of township and village enterprises": "people's gove rnments above the county level in accordance with relevant state regulations, you can the establishment of rural enterprise development fund "," township enterprise development fund dedicated to support the development of township enterprises ", etc., but because of the lack of an effective system to protect, these provisions a re difficult to implement.

(D) from the view of China's financial control

Between enterprises can not borrow each other to some extent also increase d the difficulty of financing for SMEs. Based on our current law, among the cit izens, businesses and citizen, business or civic and financial institutions can occur between the legitimate lending between enterprises and between enterprises, howe ver, been regarded as illegal loan lending relationships are not by law允许. In t his way, for SMEs, he would lose a means of financing, intangible into the finan cing of SMEs has also increased the difficulty.

Third, small and medium enterprises should develop specific strategies and r easonable financing

Therefore, at this stage of China's SME financing environment for SMEs in terms of financing of adverse circumstances, the financing of SMEs in the devel opment of specific strategies should pay attention to the following aspects:

(A) the amount of funding the pursuit of rationality

Right to shares of companies on behalf of large enterprises in terms of fina ncing aimed at achieving optimal capital structure, namely, the pursuit of cost of capital, the minimum and maximum business value; while for SMEs is concerned, the purpose of financing directly to ensure that the necessary production and ope ration of funds. Lack of funds will affect the development of production, but ex cess can lead to the use of funds of funds, diminish the effect, resulting in a wa ste. As the SME financing is not easy, so operators are more relaxed in the fac e of the funding environment, they often accuse me of "Han Xin point soldiers, t he more the better" error. However, if the money raised is unreasonable or not with the real needs, then a good thing becomes a bad thing, companies hand, ma y carry a heavy debt burden, further affect the financing capability and profitabilit y. Therefore, the business community during the beginning of financing decision, according to the needs of enterprises for capital, corporate finance their own actu al conditions and the ease and cost of decision-making circumstances, what one c an determine the size of corporate finance and reasonable.

(B) the pursuit of effectiveness of the use of funds

The financing channels for SMEs and large enterprises do not like the way there is a big choice, but that does not mean that SMEs can only be "beggars" On the contrary, due to weak risk-resisting ability of SMEs, as well as funding d ifficulties, but also should each fund to make good trade-off, considering the oper ating needs and capital costs, financing risk and investment income, and many oth er factors, must be the source of funds and to invest in combined analysis of the

cost of capital rate of return on investment the relationship between the strings t o avoid making mistakes .

(C) the pursuit of the ratio of capital structure

The use of funds for SMEs decide the type and quantity of funding. We know that the total assets of enterprises and non-current assets by current assets o f two parts. Current assets are divided into two distinct behavior: First, their nu mber changes with fluctuations in production and management of liquid assets, na mely, the so-called transient liquid assets; 2 is similar to the level of fixed assets, as long-term stability of liquid assets, namely, The so-called permanent current a ssets. According to the structure of the matching principle, small and medium en terprises for fixed assets and permanent current assets on the financial resources t o the financing of medium and long term financing is appropriate; due to seasona l, cyclical and random factors contribute to changes in business activities, the fun ds required are mainly the financing of short-term financing is appropriate. Emph asizes financing and investment in the capital structure ratio on the relationship be tween pairs of small and medium enterprises is particularly important.

(D) capital operation, in the pursuit of incremental funding at the same time pay more attention to financing of stock

Incremental funding means a quantitative increase in the total occupation of the amount of funds to meet the production and operation needs; stock financing is defined as the total occupied without increasing the amount of funds under the premise of the structure by adjusting the amount of funds used to accelerate cap ital turnover, and try to avoid unreasonable the use of funds to improve the use of funds effects units to meet the business needs of the expanding production and operation. Increment financing and the stock of the close combination of fundin g also reflects the financing of SMEs and investment activities, the inherent conne ction between the stock of financing because it is actually a kind of utilization of

capital and it belongs to the scope of investment activities. For example, compa nies would be the timely use of idle equipment, rent, sell transfer the form of "in ventory financing", it will not prevent losses and capital backlog, but also help i mprove long-term capital mobility, relieve pressure on the financing too heavy .

(E) sources of funding, the pursuit of credibility to win

Take the initiative to maintain good relations with financial institutions to m ake it understand the business and see great prospects for companies willing to su pport the development of enterprises, which every successful SME operators who are compulsory lesson. Including its two aspects: one is the choice of financial i nstitutions, should be chosen career and growth of SMEs in the future for their i nterest and willingness to invest in financial institutions; can provide business gui dance to financial institutions; branches and more convenient transactions of financ ial institutions; well-funded, and the low cost of funds of financial institutions; sta ff quality, professional ethics sound financial institutions. The other hand, cooper ation between SMEs to take the initiative to communicate with financial institutio ns, corporate business policy, development plans, financial position, indicating the difficulties encountered in order to win the performance and credibility of financia l institutions, trust and support, rather than a variety of illegal or improper means of taking money.

(Vi) financing, select the appropriate size of the enterprise itself, the strengt h and the stage of

Finance income and costs on a comparison that really necessary financing, we need to consider what kind of financing options. In the choice of financing, usually on their own to consider the size, strength, strong or weak, and corporate stage of development, combined with the characteristics of the different means of financing, select the appropriate means of financing of this enterprise developmen t, for example, in the early days of SMEs , its financing methods you can choos

e equity financing, because the early start, high risk, very few financial institution s and other creditors to the financing for you. In equity financing, business own ers and their friends and family members accounted for the vast majority o

f the f unds. This part of the financin

g is part of "insider financing" or "internal financi ng", also known as enterprise "his investment." To the development of SMEs to a certain period and the size of the future, they may choose debt financing. De bt financing primarily from financial institutions, including commercial banks and finance companies. Of high-tec

h industry, SMEs, may take into account the GE M issuing equity financing; do not meet the listing requirements for SMEs, cons

i der bank loans, financing and so on.

(Vii) financing, the selection of the most conducive to improving the compe titiveness of enterprises in financing

SME financing will usually have the following direct impact on business: Fi rst, by financing small and medium enterprises can grow capital strength and abili ty to pay small and medium enterprises and development potential; secondly, thro ugh the financing, can increase the credibility of small and medium enterprises to expand the enterprise product market share; again, through the financing, small a nd medium enterprises can expand the scale, enhance profitability, and thus take a dvantage of economies of scale improve enterprise competitiveness in the market and accelerate the development of enterprises. But the degree of competitiveness of enterprises due to the improvement of corporate financing, financing the differe nces in income there is a big difference. For example, equity financing, especiall y the first listing of ordinary shares in issue and circulation, not only impose an enormous financial intermediation, but also greatly enhance the visibility of busine sses and goodwill, so that the competitiveness of enterprises could be boosted. T herefore, when financing decisions, first select the most beneficial to small and m edium enterprises to improve competitive mode of financing.

With China's accession to the World Trade Organization, Chinese SMEs will be further expansion of access to the area, which the development of SMEs a u nique opportunity, but it also posed a challenge to SMEs. The small and mediu m enterprises in the development of the financing to make decisions is directly re lated to the survival of small and medium enterprises, so the investment and fina ncing decisions of SMEs should be fully considered on their own terms, based on corporate finance strategy to consider all aspects of the feasibility of and possibl e will bring a variety of issues, to seek their overall balance of the proceeds.

英文论文及中文翻译

International Journal of Minerals, Metallurgy and Materials Volume 17, Number 4, August 2010, Page 500 DOI: 10.1007/s12613-010-0348-y Corresponding author: Zhuan Li E-mail: li_zhuan@https://www.360docs.net/doc/f113696699.html, ? University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg 2010 Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction Zhuan Li, Peng Xiao, and Xiang Xiong State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China (Received: 12 August 2009; revised: 28 August 2009; accepted: 2 September 2009) Abstract: Carbon fibre reinforced carbon and silicon carbide dual matrix composites (C/C-SiC) were fabricated by the warm compacted-in situ reaction. The microstructure, mechanical properties, tribological properties, and wear mechanism of C/C-SiC composites at different brake speeds were investigated. The results indicate that the composites are composed of 58wt% C, 37wt% SiC, and 5wt% Si. The density and open porosity are 2.0 g·cm–3 and 10%, respectively. The C/C-SiC brake composites exhibit good mechanical properties. The flexural strength can reach up to 160 MPa, and the impact strength can reach 2.5 kJ·m–2. The C/C-SiC brake composites show excellent tribological performances. The friction coefficient is between 0.57 and 0.67 at the brake speeds from 8 to 24 m·s?1. The brake is stable, and the wear rate is less than 2.02×10?6 cm3·J?1. These results show that the C/C-SiC brake composites are the promising candidates for advanced brake and clutch systems. Keywords: C/C-SiC; ceramic matrix composites; tribological properties; microstructure [This work was financially supported by the National High-Tech Research and Development Program of China (No.2006AA03Z560) and the Graduate Degree Thesis Innovation Foundation of Central South University (No.2008yb019).] 温压-原位反应法制备C / C-SiC刹车复合材料的工艺和性能 李专,肖鹏,熊翔 粉末冶金国家重点实验室,中南大学,湖南长沙410083,中国(收稿日期:2009年8月12日修订:2009年8月28日;接受日期:2009年9月2日) 摘要:采用温压?原位反应法制备炭纤维增强炭和碳化硅双基体(C/C-SiC)复合材

计算机专业外文文献及翻译

微软Visual Studio 1微软Visual Studio Visual Studio 是微软公司推出的开发环境,Visual Studio可以用来创建Windows平台下的Windows应用程序和网络应用程序,也可以用来创建网络服务、智能设备应用程序和Office 插件。Visual Studio是一个来自微软的集成开发环境IDE,它可以用来开发由微软视窗,视窗手机,Windows CE、.NET框架、.NET精简框架和微软的Silverlight支持的控制台和图形用户界面的应用程序以及Windows窗体应用程序,网站,Web应用程序和网络服务中的本地代码连同托管代码。 Visual Studio包含一个由智能感知和代码重构支持的代码编辑器。集成的调试工作既作为一个源代码级调试器又可以作为一台机器级调试器。其他内置工具包括一个窗体设计的GUI应用程序,网页设计师,类设计师,数据库架构设计师。它有几乎各个层面的插件增强功能,包括增加对支持源代码控制系统(如Subversion和Visual SourceSafe)并添加新的工具集设计和可视化编辑器,如特定于域的语言或用于其他方面的软件开发生命周期的工具(例如Team Foundation Server的客户端:团队资源管理器)。 Visual Studio支持不同的编程语言的服务方式的语言,它允许代码编辑器和调试器(在不同程度上)支持几乎所有的编程语言,提供了一个语言特定服务的存在。内置的语言中包括C/C + +中(通过Visual C++),https://www.360docs.net/doc/f113696699.html,(通过Visual https://www.360docs.net/doc/f113696699.html,),C#中(通过Visual C#)和F#(作为Visual Studio 2010),为支持其他语言,如M,Python,和Ruby等,可通过安装单独的语言服务。它也支持的 XML/XSLT,HTML/XHTML ,JavaScript和CSS.为特定用户提供服务的Visual Studio也是存在的:微软Visual Basic,Visual J#、Visual C#和Visual C++。 微软提供了“直通车”的Visual Studio 2010组件的Visual Basic和Visual C#和Visual C + +,和Visual Web Developer版本,不需任何费用。Visual Studio 2010、2008年和2005专业版,以及Visual Studio 2005的特定语言版本(Visual Basic、C++、C#、J#),通过微软的下载DreamSpark计划,对学生免费。 2架构 Visual Studio不支持任何编程语言,解决方案或工具本质。相反,它允许插入各种功能。特定的功能是作为一个VS压缩包的代码。安装时,这个功能可以从服务器得到。IDE提供三项服务:SVsSolution,它提供了能够列举的项目和解决方案; SVsUIShell,它提供了窗口和用户界面功能(包括标签,工具栏和工具窗口)和SVsShell,它处理VS压缩包的注册。此外,IDE还可以负责协调和服务之间实现通信。所有的编辑器,设计器,项目类型和其他工具都是VS压缩包存在。Visual Studio 使用COM访问VSPackage。在Visual Studio SDK中还包括了管理软件包框架(MPF),这是一套管理的允许在写的CLI兼容的语言的任何围绕COM的接口。然而,MPF并不提供所有的Visual Studio COM 功能。

本科毕业论文内部控制外文文献翻译完整版中英对照

A Clear Look at Internal Controls: Theory and Concepts Hammed Arad (Philae) Department of accounting, Islamic Azad University, Hamadan, Iran Barak Jamshedy-Navid Faculty Member of Islamic Azad University, Kerman-shah, Iran Abstract: internal control is an accounting procedure or system designed to promote efficiency or assure the implementation of a policy or safeguard assets or avoid fraud and error. Internal Control is a major part of managing an organization. It comprises the plans, methods, and procedures used to meet missions, goals, and objectives and, in doing so, support performance-based management. Internal Control which is equal with management control helps managers achieve desired results through effective stewardship of resources. Internal controls should reduce the risks associated with undetected errors or irregularities, but designing and establishing effective internal controls is not a simple task and cannot be accomplished through a short set of quick fixes. In this paper the concepts of internal controls and different aspects of internal controls are discussed. Keywords: Internal Control, management controls, Control Environment, Control Activities, Monitoring 1. Introduction The necessity of control in new variable business environment is not latent for any person and management as a response factor for stockholders and another should implement a great control over his/her organization. Control is the activity of managing or exerting control over something. he emergence and development of systematic thoughts in recent decade required a new attention to business resource and control over this wealth. One of the hot topic a bout controls over business resource is analyzing the cost-benefit of each control. Internal Controls serve as the first line of defense in safeguarding assets and preventing and detecting errors and fraud. We can say Internal control is a whole system of controls financial and otherwise, established by the management for the smooth running of business; it includes internal cheek, internal audit and other forms of controls. COSO describe Internal Control as follow. Internal controls are the methods employed to help ensure the achievement of an objective. In accounting and organizational theory, Internal control is defined as a process effected by an organization's structure, work and authority flows, people and management information systems, designed to help the organization accomplish specific goals or objectives. It is a means by which an organization's resources are directed, monitored, and measured. It plays an important role in preventing and detecting fraud and protecting the organization's resources, both physical (e.g., machinery and property) and intangible (e.g., reputation or intellectual property such as trademarks). At the organizational level, internal control objectives relate to the reliability of financial reporting, timely feedback on the achievement of operational or strategic goals, and compliance with laws and regulations. At the specific transaction level, internal control refers to the actions taken to achieve a specific objective (e.g., how to ensure the organization's payments to third parties are for valid services rendered.) Internal control

关于力的外文文献翻译、中英文翻译、外文翻译

五、外文资料翻译 Stress and Strain 1.Introduction to Mechanics of Materials Mechanics of materials is a branch of applied mechanics that deals with the behavior of solid bodies subjected to various types of loading. It is a field of study that i s known by a variety of names, including “strength of materials” and “mechanics of deformable bodies”. The solid bodies considered in this book include axially-loaded bars, shafts, beams, and columns, as well as structures that are assemblies of these components. Usually the objective of our analysis will be the determination of the stresses, strains, and deformations produced by the loads; if these quantities can be found for all values of load up to the failure load, then we will have obtained a complete picture of the mechanics behavior of the body. Theoretical analyses and experimental results have equally important roles in the study of mechanics of materials . On many occasion we will make logical derivations to obtain formulas and equations for predicting mechanics behavior, but at the same time we must recognize that these formulas cannot be used in a realistic way unless certain properties of the been made in the laboratory. Also , many problems of importance in engineering cannot be handled efficiently by theoretical means, and experimental measurements become a practical necessity. The historical development of mechanics of materials is a fascinating blend of both theory and experiment, with experiments pointing the way to useful results in some instances and with theory doing so in others①. Such famous men as Leonardo da Vinci(1452-1519) and Galileo Galilei (1564-1642) made experiments to adequate to determine the strength of wires , bars , and beams , although they did not develop any adequate theo ries (by today’s standards ) to explain their test results . By contrast , the famous mathematician Leonhard Euler(1707-1783) developed the mathematical theory any of columns and calculated the critical load of a column in 1744 , long before any experimental evidence existed to show the significance of his results ②. Thus , Euler’s theoretical results remained unused for many years, although today they form the basis of column theory. The importance of combining theoretical derivations with experimentally determined properties of materials will be evident theoretical derivations with experimentally determined properties of materials will be evident as we proceed with

英文文献及中文翻译

毕业设计说明书 英文文献及中文翻译 学院:专 2011年6月 电子与计算机科学技术软件工程

https://www.360docs.net/doc/f113696699.html, Overview https://www.360docs.net/doc/f113696699.html, is a unified Web development model that includes the services necessary for you to build enterprise-class Web applications with a minimum of https://www.360docs.net/doc/f113696699.html, is part of https://www.360docs.net/doc/f113696699.html, Framework,and when coding https://www.360docs.net/doc/f113696699.html, applications you have access to classes in https://www.360docs.net/doc/f113696699.html, Framework.You can code your applications in any language compatible with the common language runtime(CLR), including Microsoft Visual Basic and C#.These languages enable you to develop https://www.360docs.net/doc/f113696699.html, applications that benefit from the common language runtime,type safety, inheritance,and so on. If you want to try https://www.360docs.net/doc/f113696699.html,,you can install Visual Web Developer Express using the Microsoft Web Platform Installer,which is a free tool that makes it simple to download,install,and service components of the Microsoft Web Platform.These components include Visual Web Developer Express,Internet Information Services (IIS),SQL Server Express,and https://www.360docs.net/doc/f113696699.html, Framework.All of these are tools that you use to create https://www.360docs.net/doc/f113696699.html, Web applications.You can also use the Microsoft Web Platform Installer to install open-source https://www.360docs.net/doc/f113696699.html, and PHP Web applications. Visual Web Developer Visual Web Developer is a full-featured development environment for creating https://www.360docs.net/doc/f113696699.html, Web applications.Visual Web Developer provides an ideal environment in which to build Web sites and then publish them to a hosting https://www.360docs.net/doc/f113696699.html,ing the development tools in Visual Web Developer,you can develop https://www.360docs.net/doc/f113696699.html, Web pages on your own computer.Visual Web Developer includes a local Web server that provides all the features you need to test and debug https://www.360docs.net/doc/f113696699.html, Web pages,without requiring Internet Information Services(IIS)to be installed. Visual Web Developer provides an ideal environment in which to build Web sites and then publish them to a hosting https://www.360docs.net/doc/f113696699.html,ing the development tools in Visual Web Developer,you can develop https://www.360docs.net/doc/f113696699.html, Web pages on your own computer.

外文资料及其翻译

A Wavelet Based Approach for Fast Detection of Internal Fault in Power Transformers The power transformer is one of the most expensive elements of power system and its protection is an essential part of the overall system protection strategy. The differential protection provides the best protection for power transformer. Its operation principle is based on this point that the differential current during an internal fault is higher than normal condition. But, a large transient current (inrush current) can cause mal-operation of differential relays. Then, studies for the improvement of the transformer protection have focused on discrimination between internal short circuit faults and inrush currents in transformers. The magnetizing inrush current has a large second order harmonic component in comparison to internal faults. Therefore , some transformer protection systems are designed to halt operating during the inrush current by sensing this large second order harmonic. The second harmonic component in the magnetizing inrush currents tend to be relatively small in modern large power transformers because of improvements in the power transformer core materials. Also , it has been seen that the fault current can contain higher second order harmonics than the inrush current due to nonlinear fault resistance, CT saturation .the distributed capacitance in the transmission line, which transformer is connected to, or due to the use of extra high voltage underground cables. Various methods have been suggested for overcoming this protection system mal-operation. This paper presents a wavelet based method for discrimination among inrush current, internal short circuit ,external short circuit and energizing and it is not affected by CT saturation and it is able to detect internal faults while transformer energization. Unlike Artificial Neural Network and Fuzzy logic based algorithms. This approach is not system dependent. The operating time of the scheme is less than 10ms. The Daubechies mother wavelet is used with a sample rate of 5 kHz. Then , the differential currents of the three phases are decomposed into two details and only the second level will be considered by using db5 mother wavelet. Discrete Wavelet Transform The wavelet transform is a powerful tool to extract information from the non-stationary signals simultaneously in both time and frequency domains. The ability of the wavelet transform to focus on short time intervals for high-frequency components and long intervals for low-frequency components improves the analysis

会计内部控制中英文对照外文翻译文献

会计内部控制中英文对照外文翻译文献(文档含英文原文和中文翻译)

内部控制透视:理论与概念 摘要:内部控制是会计程序或控制系统,旨在促进效率或保证一个执行政策或保护资产或避免欺诈和错误。内部是一个组织管理的重要组成部分。它包括计划、方法和程序使用,以满足任务,目标和目的,并在这样做,支持基于业绩的管理。内部控制是管理阶层的平等与控制可以帮助管理者实现资源的预期的有效管理的结果通过。内部控制应减少或违规错误的风险关联未被发现的,但设计和建立有效的内部控制不是一个简单的任务,不可能是一个实现通过快速修复短套。在此讨论了内部文件的概念的不同方面的内部控制和管制。 关键词:内部控制,管理控制,控制环境,控制活动,监督 1、介绍 环境需要新的业务控制变量不为任何潜在的股东和管理人士的响应因子为1,另外应执行/她组织了一个很大的控制权。控制是管理活动的东西或以上施加控制。思想的产生和近十年的发展需要有系统的商业资源和控制这种财富一个新的关注。主题之一热一回合管制的商业资源是分析每个控制成本效益。 作为内部控制和欺诈的第一道防线,维护资产以及预防和侦查错误。内部控制,我们可以说是一种控制整个系统的财务和其他方面的管理制定了为企业的顺利运行;它包括内部的脸颊,内部审计和其他形式的控制。 COSO的内部控制描述如下。内部控制是一个客观的方法用来帮助确保实现。在会计和组织理论,内部控制是指或目标目标的过程实施由组织的结构,工作和权力流动,人员和具体的管理信息系统,旨在帮助组织实现。这是一种手段,其中一个组织的资源被定向,监控和测量。它发挥着无形的(重要的作用,预防和侦查欺诈和保护组织的资源,包括生理(如,机械和财产)和乙二醇,声誉或知识产权,如商标)。在组织水平,内部控制目标与可靠性的目标或战略的财务报告,及时反馈业务上的成就,并遵守法律,法规。在具体的交易水平,内部控制是指第三方采取行动以实现一个具体目标(例如,如何确保本组织的款项,在申请服务提供有效的。)内部控制程序reduce程变异,导

10kV小区供配电英文文献及中文翻译

在广州甚至广东的住宅小区电气设计中,一般都会涉及到小区的高低压供配电系统的设计.如10kV高压配电系统图,低压配电系统图等等图纸一大堆.然而在真正实施过程中,供电部门(尤其是供电公司指定的所谓电力设计小公司)根本将这些图纸作为一回事,按其电脑里原有的电子档图纸将数据稍作改动以及断路器按其所好换个厂家名称便美其名曰设计(可笑不?),拿出来的图纸根本无法满足电气设计的设计意图,致使严重存在以下问题:(也不知道是职业道德问题还是根本一窍不通) 1.跟原设计的电气系统货不对板,存在与低压开关柜后出线回路严重冲突,对实际施工造成严重阻碍,经常要求设计单位改动原有电气系统图才能满足它的要求(垄断的没话说). 2.对消防负荷和非消防负荷的供电(主要在高层建筑里)应严格分回路(从母线段)都不清楚,将消防负荷和非消防负荷按一个回路出线(尤其是将电梯和消防电梯,地下室的动力合在一起等等,有的甚至将楼顶消防风机和梯间照明合在一个回路,以一个表计量). 3.系统接地保护接地型式由原设计的TN-S系统竟曲解成"TN-S-C-S"系统(室内的还需要做TN-C,好玩吧?),严格的按照所谓的"三相四线制"再做重复接地来实施,导致后续施工中存在重复浪费资源以及安全隐患等等问题.. ............................(违反建筑电气设计规范等等问题实在不好意思一一例举,给那帮人留点混饭吃的面子算了) 总之吧,在通过图纸审查后的电气设计图纸在这帮人的眼里根本不知何物,经常是完工后的高低压供配电系统已是面目全非了,能有百分之五十的保留已经是谢天谢地了. 所以.我觉得:住宅建筑电气设计,让供电部门走!大不了留点位置,让他供几个必需回路的电,爱怎么折腾让他自个怎么折腾去.. Guangzhou, Guangdong, even in the electrical design of residential quarters, generally involving high-low cell power supply system design. 10kV power distribution systems, such as maps, drawings, etc. low-voltage distribution system map a lot. But in the real implementation of the process, the power sector (especially the so-called power supply design company appointed a small company) did these drawings for one thing, according to computer drawings of the original electronic file data to make a little change, and circuit breakers by their the name of another manufacturer will be sounding good design (ridiculously?), drawing out the design simply can not meet the electrical design intent, resulting in a serious following problems: (do not know or not know nothing about ethical issues) 1. With the original design of the electrical system not meeting board, the existence and low voltage switchgear circuit after qualifying serious conflicts seriously hinder the actual construction, often require changes to the original design unit plans to meet its electrical system requirements (monopoly impress ). 2. On the fire load and fire load of non-supply (mainly in high-rise building in) should be strictly sub-loop (from the bus segment) are not clear, the fire load and fire load of non-qualifying press of a circuit (especially the elevator and fire elevator, basement, etc.

中文和英文简历和专业英语材料翻译

韶关学院 期末考核报告 科目:专业英语 学生姓名: 学号: 同组人: 院系: 专业班级: 考核时间:2012年10月9日—2012年11月1 日评阅教师: 评分:

第1章英文阅读材料翻译 (1) 第2章中文摘要翻译英文 (3) 第3章中文简历和英文简历 (4) 第4章课程学习体会和建议 (6) 参考文献 (7)

第1章英文阅读材料翻译 Mechanization and Automation Processes of mechanization have been developing and becoming more complex ever since the beginning of the Industrial Revolution at the end of the 18th century. The current developments of automatic processes are, however, different from the old ones. The “automation” of the 20th century is distinct from the mechanization of the 18th and 19th centuries inasmuch as mechanization was applied to individual operations, wherea s “automation” is concerned with the operation and control of a complete producing unit. And in many, though not all, instances the element of control is so great that whereas mechanization displaces muscle, “automation”displaces brain as well. The distinction between the mechanization of the past and what is happening now is, however, not a sharp one. At one extreme we have the electronic computer with its quite remarkable capacity for discrimination and control, while at the other end of the scale are “ transfer machines” , as they are now called, which may be as simple as a conveyor belt to another. An automatic mechanism is one which has a capacity for self-regulation; that is, it can regulate or control the system or process without the need for constant human attention or adjustment. Now people often talk about “feedback” as begin an essential factor of the new industrial techniques, upon which is base an automatic self-regulating system and by virtue of which any deviation in the system from desired condition can be detected, measured, reported and corrected. when “feedback” is applied to the process by which a large digital computer runs at the immense speed through a long series of sums, constantly rejecting the answers until it finds one to fit a complex set of facts which have been put to it, it is perhaps different in degree from what we have previously been accustomed to machines. But “feedback”, as such, is a familiar mechanical conception. The old-fashioned steam engine was fitted with a centrifugal governor, two balls on levers spinning round and round an upright shaft. If the steam pressure rose and the engine started to go too fast, the increased speed of the spinning governor caused it to rise up the vertical rod and shut down a valve. This cut off some of the steam and thus the engine brought itself back to its proper speed. The mechanization, which was introduced with the Industrial Revolution, because it was limited to individual processes, required the employment of human labor to control each machine as well as to load and unload materials and transfer them from one place to another. Only in a few instances were processes automatically linked together and was production organized as a continuous flow. In general, however, although modern industry has been highly mechanized ever since the 1920s, the mechanized parts have not as a rule been linked together. Electric-light bulbs, bottles and the components of innumerable mass-produced

相关文档
最新文档